MAX3483EESA+T vs MAX3483ESA+T Comparación
Comparación detallada lado a lado de MAX3483EESA+T por Analog Devices y MAX3483ESA+T por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX3483EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+T ✓ ActivoComparación de especificaciones
| Parámetro | MAX3483EESA+T | MAX3483ESA+T |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| Tensión de alimentación | 3.3 V | 3.3 V |
| Tensión de alimentación de funcionamiento | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating for exact suffix] |
| Driver Type | Slew-rate-limited true driver | Slew-rate-limited true differential driver |
| Supported Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| Encapsulado | 8-pin NSOIC | 8-SOIC, 8 pins |
| Recuento de pines | 8 pins | — |
| Tipo de montaje | Surface mount | Surface mount |
| Corriente de alimentación | [DATA_NEEDED: supply current] | [DATA_NEEDED: operating supply current] |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Documented Low-Rate Operation | — | Up to 250 kbps |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Communication Mode | — | Half-duplex |
| Standards Supported | — | RS-485 and RS-422 |
| Disabled Output State | — | High impedance |
| Controls | — | Driver Enable and Receiver Enable |
| Temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |