MAX3483EESA+T vs MAX3483ESA+T 比較
詳細な並列比較: MAX3483EESA+T メーカー: Analog Devices および MAX3483ESA+T メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
MAX3483EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+T ✓ 生産中仕様比較
| パラメータ | MAX3483EESA+T | MAX3483ESA+T |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| 電源電圧 | 3.3 V | 3.3 V |
| 動作電源電圧 | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating for exact suffix] |
| Driver Type | Slew-rate-limited true driver | Slew-rate-limited true differential driver |
| Supported Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| パッケージ | 8-pin NSOIC | 8-SOIC, 8 pins |
| ピン数 | 8 pins | — |
| 実装タイプ | Surface mount | Surface mount |
| 電源電流 | [DATA_NEEDED: supply current] | [DATA_NEEDED: operating supply current] |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Documented Low-Rate Operation | — | Up to 250 kbps |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Communication Mode | — | Half-duplex |
| Standards Supported | — | RS-485 and RS-422 |
| Disabled Output State | — | High impedance |
| Controls | — | Driver Enable and Receiver Enable |
| 動作温度 | — | [DATA_NEEDED: operating temperature range] |