MAX3483EESA+T vs MAX3483ESA+T तुलना
विस्तृत दोनों ओर की तुलना MAX3483EESA+T द्वारा Analog Devices और MAX3483ESA+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX3483EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+T ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3483EESA+T | MAX3483ESA+T |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| सप्लाई वोल्टेज | 3.3 V | 3.3 V |
| ऑपरेटिंग सप्लाई वोल्टेज | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating for exact suffix] |
| Driver Type | Slew-rate-limited true driver | Slew-rate-limited true differential driver |
| Supported Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| पैकेज | 8-pin NSOIC | 8-SOIC, 8 pins |
| पिन काउंट | 8 pins | — |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| सप्लाई करंट | [DATA_NEEDED: supply current] | [DATA_NEEDED: operating supply current] |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Documented Low-Rate Operation | — | Up to 250 kbps |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Communication Mode | — | Half-duplex |
| Standards Supported | — | RS-485 and RS-422 |
| Disabled Output State | — | High impedance |
| Controls | — | Driver Enable and Receiver Enable |
| ऑपरेटिंग तापमान | — | [DATA_NEEDED: operating temperature range] |