MAX3485ECSA+ vs MAX3485CSA+ Comparación
Comparación detallada lado a lado de MAX3485ECSA+ por Analog Devices y MAX3485CSA+ por Maxim Integrated. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | MAX3485ECSA+ | MAX3485CSA+ |
|---|---|---|
| Marca | Analog Devices | Maxim Integrated |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Unknown |
| Product Type | Half-duplex RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Driver/Receiver Count | 1 driver and 1 receiver | — |
| Tensión de alimentación | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating] |
| Driver Edge Control | Slew-rate limited | — |
| Supported Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| Encapsulado | 8-pin SOIC | 8-SOIC, 0.154 inch, 3.90 mm width |
| Tipo de montaje | Surface mount | Surface mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | 0C to +70C |
| Corriente de alimentación | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: operating and quiescent supply current] |
| Driver Output Current | [DATA_NEEDED: differential output current] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Shutdown and Enable Control | [DATA_NEEDED: DE and active-low RE control details] | — |
| Estado RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Velocidad de datos | — | 10 Mbps |
| Duplex Mode | — | Half-duplex |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Driver Feature | — | Slew-rate-limited driver family feature |
| Short-Circuit Protection | — | Short-circuit current limited driver |
| Apagado térmico | — | Driver enters high-impedance state during thermal shutdown |
| Receiver Feature | — | Fail-safe receiver input |
| Channel Direction | — | 1 transmitter and 1 receiver |
| Receiver Input Common-Mode Range | — | [DATA_NEEDED: receiver input common-mode range] |
| Logic Output Levels | — | [DATA_NEEDED: logic output voltage levels] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing requirements] |