MAX3485ECSA+ vs MAX3485CSA+ So sánh

So sánh chi tiết song song của MAX3485ECSA+ bằng Analog Devices và MAX3485CSA+ bằng Maxim Integrated. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3485ECSA+ MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ ✓ Hoạt động
Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown

So sánh thông số kỹ thuật

Tham số MAX3485ECSA+ MAX3485CSA+
Thương hiệu Analog Devices Maxim Integrated
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Unknown
Product Type Half-duplex RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Driver/Receiver Count 1 driver and 1 receiver —
Điện áp cung cấp 3.3 V 3.3 V
Maximum Data Rate 12 Mbps —
ESD Protection ±15 kV [DATA_NEEDED: ESD protection rating]
Driver Edge Control Slew-rate limited —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
Hộp 8-pin SOIC 8-SOIC, 0.154 inch, 3.90 mm width
Kiểu lắp đặt Surface mount Surface mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] 0C to +70C
Điện áp cung cấp [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: operating and quiescent supply current]
Driver Output Current [DATA_NEEDED: differential output current] —
Receiver Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Driver Propagation Delay [DATA_NEEDED: driver propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Shutdown and Enable Control [DATA_NEEDED: DE and active-low RE control details] —
Trạng thái RoHS unknown —
REACH Status unknown —
AEC-Q100 Qualification unknown —
Tốc độ dữ liệu — 10 Mbps
Duplex Mode — Half-duplex
Driver Count — 1 driver
Receiver Count — 1 receiver
Driver Feature — Slew-rate-limited driver family feature
Short-Circuit Protection — Short-circuit current limited driver
Tắt nhiệt — Driver enters high-impedance state during thermal shutdown
Receiver Feature — Fail-safe receiver input
Channel Direction — 1 transmitter and 1 receiver
Receiver Input Common-Mode Range — [DATA_NEEDED: receiver input common-mode range]
Logic Output Levels — [DATA_NEEDED: logic output voltage levels]
Termination Requirement — [DATA_NEEDED: termination and biasing requirements]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá