MAX3485ECSA+ vs MAX3485CSA+ Karşılaştırma

Ayrıntılı yan yana karşılaştırma MAX3485ECSA+ tarafından Analog Devices ve MAX3485CSA+ tarafından Maxim IntegratedAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Analog Devices
MAX3485ECSA+ MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ ✓ Aktif
Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown

Özellik Karşılaştırması

Parametre MAX3485ECSA+ MAX3485CSA+
Marka Analog Devices Maxim Integrated
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Unknown
Product Type Half-duplex RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Driver/Receiver Count 1 driver and 1 receiver —
Besleme Gerilimi 3.3 V 3.3 V
Maximum Data Rate 12 Mbps —
ESD Protection ±15 kV [DATA_NEEDED: ESD protection rating]
Driver Edge Control Slew-rate limited —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
Paket 8-pin SOIC 8-SOIC, 0.154 inch, 3.90 mm width
Montaj Türü Surface mount Surface mount
İşletim Sıcaklığı Aralığı [DATA_NEEDED: operating temperature range] 0C to +70C
Besleme Akımı [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: operating and quiescent supply current]
Driver Output Current [DATA_NEEDED: differential output current] —
Receiver Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Driver Propagation Delay [DATA_NEEDED: driver propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Shutdown and Enable Control [DATA_NEEDED: DE and active-low RE control details] —
RoHS Durumu unknown —
REACH Status unknown —
AEC-Q100 Qualification unknown —
Veri Hızı — 10 Mbps
Duplex Mode — Half-duplex
Driver Count — 1 driver
Receiver Count — 1 receiver
Driver Feature — Slew-rate-limited driver family feature
Short-Circuit Protection — Short-circuit current limited driver
Termal Kapatma — Driver enters high-impedance state during thermal shutdown
Receiver Feature — Fail-safe receiver input
Channel Direction — 1 transmitter and 1 receiver
Receiver Input Common-Mode Range — [DATA_NEEDED: receiver input common-mode range]
Logic Output Levels — [DATA_NEEDED: logic output voltage levels]
Termination Requirement — [DATA_NEEDED: termination and biasing requirements]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin