MPX2010GP vs MPX2010DP Comparación
Comparación detallada lado a lado de MPX2010GP por STMicroelectronics y MPX2010DP por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
MPX2010GP - 10 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2010GP ✓ ActivoComparación de especificaciones
| Parámetro | MPX2010GP | MPX2010DP |
|---|---|---|
| Marca | STMicroelectronics | NXP Semiconductors |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $7,20 | $8,50 |
| Pressure Type | Vented Gauge | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | — |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Sensitivity (Full-Scale Span) | 25 mV typical at 10 V excitation | — |
| Rango de tensión de salida | 0 mV to 25 mV (10 V supply) | — |
| Offset (Zero Pressure) | 0 mV nominal | — |
| Supply Voltage (Excitation) | 10 V DC typical (max per datasheet) | — |
| Corriente de alimentación | 6 mA DC typical | — |
| Response Time | 1 ms typical | 1.0 ms (typical) |
| Linearity | [DATA_NEEDED: linearity %FS] | ±0.05% (typ) |
| Temperature Compensation | On-chip, calibrated | 0 °C to +85 °C (on-chip) |
| Rango de temperatura de funcionamiento | -40 C to +125 C | — |
| Storage Temperature Range | -40 C to +125 C | — |
| Port Style | Male, 0.19 inch (4.93 mm) tube, vented gauge | — |
| Encapsulado / Carcasa | 4-SIP Module (Case 344B-01) | — |
| Tipo de montaje | Through-Hole (SIP) | — |
| Media Compatibility | Dry gases (silicone gel isolation) | Dry air or non-corrosive gas |
| Estado RoHS | Compliant | Compliant |
| Tipo de sensor | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Tipo de salida | — | Analog voltage, Wheatstone bridge (mV level) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Tensión de alimentación | — | 10 V DC typical (max 16 V) |
| Temperatura de funcionamiento | — | -40 °C to +125 °C |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |