MPX2010GP vs MPX2010DP Vergleich
Detaillierter Direktvergleich von MPX2010GP von STMicroelectronics und MPX2010DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPX2010GP - 10 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2010GP ✓ AktivSpezifikationsvergleich
| Parameter | MPX2010GP | MPX2010DP |
|---|---|---|
| Marke | STMicroelectronics | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $7,20 | $8,50 |
| Pressure Type | Vented Gauge | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | — |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Sensitivity (Full-Scale Span) | 25 mV typical at 10 V excitation | — |
| Ausgangsspannungsbereich | 0 mV to 25 mV (10 V supply) | — |
| Offset (Zero Pressure) | 0 mV nominal | — |
| Supply Voltage (Excitation) | 10 V DC typical (max per datasheet) | — |
| Versorgungsstrom | 6 mA DC typical | — |
| Response Time | 1 ms typical | 1.0 ms (typical) |
| Linearity | [DATA_NEEDED: linearity %FS] | ±0.05% (typ) |
| Temperature Compensation | On-chip, calibrated | 0 °C to +85 °C (on-chip) |
| Betriebstemperaturbereich | -40 C to +125 C | — |
| Storage Temperature Range | -40 C to +125 C | — |
| Port Style | Male, 0.19 inch (4.93 mm) tube, vented gauge | — |
| Gehäuse / Bauform | 4-SIP Module (Case 344B-01) | — |
| Montageart | Through-Hole (SIP) | — |
| Media Compatibility | Dry gases (silicone gel isolation) | Dry air or non-corrosive gas |
| RoHS-Status | Compliant | Compliant |
| Sensortyp | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Ausgangstyp | — | Analog voltage, Wheatstone bridge (mV level) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Versorgungsspannung | — | 10 V DC typical (max 16 V) |
| Betriebstemperatur | — | -40 °C to +125 °C |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |