MPX2010GP vs MPX2010DP Comparaison
Comparaison détaillée côte à côte de MPX2010GP par STMicroelectronics et MPX2010DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
MPX2010GP - 10 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2010GP ✓ ActifComparaison des spécifications
| Paramètre | MPX2010GP | MPX2010DP |
|---|---|---|
| Marque | STMicroelectronics | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,20 | $8,50 |
| Pressure Type | Vented Gauge | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | — |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Sensitivity (Full-Scale Span) | 25 mV typical at 10 V excitation | — |
| Plage de tension de sortie | 0 mV to 25 mV (10 V supply) | — |
| Offset (Zero Pressure) | 0 mV nominal | — |
| Supply Voltage (Excitation) | 10 V DC typical (max per datasheet) | — |
| Courant d'alimentation | 6 mA DC typical | — |
| Response Time | 1 ms typical | 1.0 ms (typical) |
| Linearity | [DATA_NEEDED: linearity %FS] | ±0.05% (typ) |
| Temperature Compensation | On-chip, calibrated | 0 °C to +85 °C (on-chip) |
| Plage de température de fonctionnement | -40 C to +125 C | — |
| Storage Temperature Range | -40 C to +125 C | — |
| Port Style | Male, 0.19 inch (4.93 mm) tube, vented gauge | — |
| Boîtier / Format | 4-SIP Module (Case 344B-01) | — |
| Type de montage | Through-Hole (SIP) | — |
| Media Compatibility | Dry gases (silicone gel isolation) | Dry air or non-corrosive gas |
| Statut RoHS | Compliant | Compliant |
| Type de capteur | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Type de sortie | — | Analog voltage, Wheatstone bridge (mV level) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Tension d'alimentation | — | 10 V DC typical (max 16 V) |
| Température de fonctionnement | — | -40 °C to +125 °C |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |