MPXH6115AC6U vs MPXHZ6115A6T1 Comparación
Comparación detallada lado a lado de MPXH6115AC6U por NXP Semiconductors y MPXHZ6115A6T1 por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC
MPXH6115AC6U ✓ ActivoNXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ ActivoComparación de especificaciones
| Parámetro | MPXH6115AC6U | MPXHZ6115A6T1 |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $5,75 | $10,85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Rango de tensión de salida | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V (at 5 V supply) |
| Tensión de alimentación | 4.75 V to 5.25 V (5 V typical) | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Encapsulado | 8-SOIC (0.335 inch, 8.50 mm width) Top Port | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| Port Type | Male - 0.13 inch (3.3 mm) Tube, Top | — |
| Rango de temperatura de funcionamiento | -40 C to +125 C | -40 °C to +125 °C |
| Compensated Temperature Range | 0 C to +85 C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Tipo de salida | Analog, ratiometric to VCC | Analog Voltage |
| Tipo de montaje | Surface Mount | Surface Mount (PPS thermoplastic) |
| Technology | Piezoresistive MEMS, monolithic silicon | — |
| Port Orientation | Top-side vertical | — |
| Nivel MSL | [DATA_NEEDED: MSL rating] | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Accuracy | — | ±1.5% (0 °C to 85 °C) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| Port Style | — | No Port (media-resistant PPS surface mount) |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |
| Media Compatibility | — | Media-resistant PPS package; dry gas media recommended |