MPXH6115AC6U vs MPXHZ6115A6T1 Comparaison
Comparaison détaillée côte à côte de MPXH6115AC6U par NXP Semiconductors et MPXHZ6115A6T1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC
MPXH6115AC6U ✓ ActifNXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ ActifComparaison des spécifications
| Paramètre | MPXH6115AC6U | MPXHZ6115A6T1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,75 | $10,85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Plage de tension de sortie | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V (at 5 V supply) |
| Tension d'alimentation | 4.75 V to 5.25 V (5 V typical) | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Boîtier | 8-SOIC (0.335 inch, 8.50 mm width) Top Port | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| Port Type | Male - 0.13 inch (3.3 mm) Tube, Top | — |
| Plage de température de fonctionnement | -40 C to +125 C | -40 °C to +125 °C |
| Compensated Temperature Range | 0 C to +85 C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Type de sortie | Analog, ratiometric to VCC | Analog Voltage |
| Type de montage | Surface Mount | Surface Mount (PPS thermoplastic) |
| Technology | Piezoresistive MEMS, monolithic silicon | — |
| Port Orientation | Top-side vertical | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Accuracy | — | ±1.5% (0 °C to 85 °C) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| Port Style | — | No Port (media-resistant PPS surface mount) |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |
| Media Compatibility | — | Media-resistant PPS package; dry gas media recommended |