MPXH6115AC6U vs MPXHZ6115A6T1 比較
詳細な並列比較: MPXH6115AC6U メーカー: NXP Semiconductors および MPXHZ6115A6T1 メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
NXP Semiconductors
MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC
MPXH6115AC6U ✓ 生産中NXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ 生産中仕様比較
| パラメータ | MPXH6115AC6U | MPXHZ6115A6T1 |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Pressure Sensors | Pressure Sensors |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $5.75 | $10.85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| 出力電圧範囲 | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V (at 5 V supply) |
| 電源電圧 | 4.75 V to 5.25 V (5 V typical) | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| パッケージ | 8-SOIC (0.335 inch, 8.50 mm width) Top Port | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| Port Type | Male - 0.13 inch (3.3 mm) Tube, Top | — |
| 動作温度範囲 | -40 C to +125 C | -40 °C to +125 °C |
| Compensated Temperature Range | 0 C to +85 C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| 出力タイプ | Analog, ratiometric to VCC | Analog Voltage |
| 実装タイプ | Surface Mount | Surface Mount (PPS thermoplastic) |
| Technology | Piezoresistive MEMS, monolithic silicon | — |
| Port Orientation | Top-side vertical | — |
| MSLレベル | [DATA_NEEDED: MSL rating] | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Accuracy | — | ±1.5% (0 °C to 85 °C) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| Port Style | — | No Port (media-resistant PPS surface mount) |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |
| Media Compatibility | — | Media-resistant PPS package; dry gas media recommended |