SN65HVD06DR vs SP485EEN-L Comparación
Comparación detallada lado a lado de SN65HVD06DR por Texas Instruments y SP485EEN-L por MaxLinear. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD06DR - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments
SN65HVD06DR ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD06DR | SP485EEN-L |
|---|---|---|
| Marca | Texas Instruments | MaxLinear |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Función | Transceiver | — |
| Protocol | RS422, RS485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Velocidad de datos | 10 Mbps | 10,000 kbps |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Tensión de alimentación | 4.5 V to 5.5 V | — |
| Temperatura de funcionamiento | -40C to +85C | — |
| Minimum Differential Output Voltage | 2.5 V into 54 ohm load | — |
| Bus-Pin ESD Protection (HBM) | 16 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Failsafe | Open, short, and idle-bus | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482E | — |
| Encapsulado | 8-pin SOIC (D) | 8-pin SOIC |
| Tipo de montaje | Surface Mount | Surface mount |
| Nivel MSL | 1 (unlimited) | — |
| Estado RoHS | Compliant | — |
| Product Type | — | Half-duplex RS-422/RS-485 transceiver |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Alternate Family Data Rate | — | Up to 5 Mbps |
| Tensión de alimentación de funcionamiento | — | 4.75 V to 5.25 V |
| Rango de temperatura de funcionamiento | — | -40 C to +85 C |
| ESD Tolerance, Human Body Model | — | Greater than 15 kV |
| ESD Tolerance, Air Discharge Method | — | Greater than 15 kV under IEC1000-4-2 |
| Supported Protocols | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Power Classification | — | Low-power interface IC |
| EMI Characteristics | — | Enhanced low-EMI design |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |