SN65HVD06DR vs SP485EEN-L 比較

詳細並排比較 SN65HVD06DR 由 Texas Instruments 與 SP485EEN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ 啟用中

規格比較

參數 SN65HVD06DR SP485EEN-L
品牌 Texas Instruments MaxLinear
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
功能 Transceiver —
Protocol RS422, RS485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
資料速率 10 Mbps 10,000 kbps
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis mV] —
供應電壓 4.5 V to 5.5 V —
工作溫度 -40C to +85C —
Minimum Differential Output Voltage 2.5 V into 54 ohm load —
Bus-Pin ESD Protection (HBM) 16 kV —
Unit Load 1/8 (up to 256 nodes) —
Failsafe Open, short, and idle-bus —
Standards Compliance ANSI TIA/EIA-485-A, ISO 8482E —
封裝 8-pin SOIC (D) 8-pin SOIC
安裝類型 Surface Mount Surface mount
MSL 等級 1 (unlimited) —
RoHS 狀態 Compliant —
Product Type — Half-duplex RS-422/RS-485 transceiver
Transmitter and Receiver Count — 1 transmitter and 1 receiver
Alternate Family Data Rate — Up to 5 Mbps
工作電源電壓 — 4.75 V to 5.25 V
工作溫度範圍 — -40 C to +85 C
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Duplex Mode — Half-duplex
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價