SN65HVD06DR vs SP485EEN-L 比較

詳細な並列比較: SN65HVD06DR メーカー: Texas Instruments および SP485EEN-L メーカー: MaxLinear。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ 生産中

仕様比較

パラメータ SN65HVD06DR SP485EEN-L
ブランド Texas Instruments MaxLinear
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
機能 Transceiver —
Protocol RS422, RS485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
データレート 10 Mbps 10,000 kbps
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis mV] —
電源電圧 4.5 V to 5.5 V —
動作温度 -40C to +85C —
Minimum Differential Output Voltage 2.5 V into 54 ohm load —
Bus-Pin ESD Protection (HBM) 16 kV —
Unit Load 1/8 (up to 256 nodes) —
Failsafe Open, short, and idle-bus —
Standards Compliance ANSI TIA/EIA-485-A, ISO 8482E —
パッケージ 8-pin SOIC (D) 8-pin SOIC
実装タイプ Surface Mount Surface mount
MSLレベル 1 (unlimited) —
RoHS ステータス Compliant —
Product Type — Half-duplex RS-422/RS-485 transceiver
Transmitter and Receiver Count — 1 transmitter and 1 receiver
Alternate Family Data Rate — Up to 5 Mbps
動作電源電圧 — 4.75 V to 5.25 V
動作温度範囲 — -40 C to +85 C
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Duplex Mode — Half-duplex
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼