SP3232EEA-L vs MAX3232CAE+ Comparación
Comparación detallada lado a lado de SP3232EEA-L por MaxLinear y MAX3232CAE+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | SP3232EEA-L | MAX3232CAE+ |
|---|---|---|
| Marca | MaxLinear | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-232 transceiver IC | RS-232 interface transceiver |
| Transceiver Configuration | 2 transmitters and 2 receivers | — |
| Velocidad de datos | 120 kbps minimum under full load | — |
| Tensión de alimentación de funcionamiento | 3 V to 5.5 V | — |
| Typical Supply Current | 1 mA | — |
| Corriente de apagado | 1 µA | — |
| Charge-Pump Capacitor Requirement | 0.1 µF at 3.3 V | — |
| Rango de temperatura de funcionamiento | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 16-pin SSOP | 16-pin SSOP |
| Tipo de montaje | Surface mount | Surface mount |
| Interface Standard | True EIA/TIA-232-F operation | True RS-232 |
| IEC 61000-4-2 ESD Protection | ±15 kV | — |
| Human Body Model ESD Protection | ±15 kV | — |
| Charge-Pump Supply | Integrated on-chip charge pump | — |
| Power-Supply Topology | Single-supply RS-232 interface | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| Transmitter Channels | — | 2 |
| Receiver Channels | — | 2 |
| Supply Voltage Range | — | 3.0 V to 5.5 V |
| Maximum Data Rate | — | 1 Mbps |
| Charge-Pump Architecture | — | Dual charge pump |
| Transmitter Output Stage | — | Low-dropout design |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating for MAX3232CAE+] |
| Corriente de alimentación | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Logic Compatibility | — | [DATA_NEEDED: logic input thresholds and output levels] |