SP3232EEA-L vs MAX3232CAE+ Comparaison
Comparaison détaillée côte à côte de SP3232EEA-L par MaxLinear et MAX3232CAE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | SP3232EEA-L | MAX3232CAE+ |
|---|---|---|
| Marque | MaxLinear | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-232 transceiver IC | RS-232 interface transceiver |
| Transceiver Configuration | 2 transmitters and 2 receivers | — |
| Débit de données | 120 kbps minimum under full load | — |
| Tension d'alimentation de fonctionnement | 3 V to 5.5 V | — |
| Typical Supply Current | 1 mA | — |
| Courant d'arrêt | 1 µA | — |
| Charge-Pump Capacitor Requirement | 0.1 µF at 3.3 V | — |
| Plage de température de fonctionnement | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 16-pin SSOP | 16-pin SSOP |
| Type de montage | Surface mount | Surface mount |
| Interface Standard | True EIA/TIA-232-F operation | True RS-232 |
| IEC 61000-4-2 ESD Protection | ±15 kV | — |
| Human Body Model ESD Protection | ±15 kV | — |
| Charge-Pump Supply | Integrated on-chip charge pump | — |
| Power-Supply Topology | Single-supply RS-232 interface | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| Transmitter Channels | — | 2 |
| Receiver Channels | — | 2 |
| Supply Voltage Range | — | 3.0 V to 5.5 V |
| Maximum Data Rate | — | 1 Mbps |
| Charge-Pump Architecture | — | Dual charge pump |
| Transmitter Output Stage | — | Low-dropout design |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating for MAX3232CAE+] |
| Courant d'alimentation | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Logic Compatibility | — | [DATA_NEEDED: logic input thresholds and output levels] |