SP3232EEA-L vs MAX3232CAE+ Karşılaştırma
Ayrıntılı yan yana karşılaştırma SP3232EEA-L tarafından MaxLinear ve MAX3232CAE+ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | SP3232EEA-L | MAX3232CAE+ |
|---|---|---|
| Marka | MaxLinear | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-232 transceiver IC | RS-232 interface transceiver |
| Transceiver Configuration | 2 transmitters and 2 receivers | — |
| Veri Hızı | 120 kbps minimum under full load | — |
| İşletim Besleme Gerilimi | 3 V to 5.5 V | — |
| Typical Supply Current | 1 mA | — |
| Kapatma Akımı | 1 µA | — |
| Charge-Pump Capacitor Requirement | 0.1 µF at 3.3 V | — |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Paket | 16-pin SSOP | 16-pin SSOP |
| Montaj Türü | Surface mount | Surface mount |
| Interface Standard | True EIA/TIA-232-F operation | True RS-232 |
| IEC 61000-4-2 ESD Protection | ±15 kV | — |
| Human Body Model ESD Protection | ±15 kV | — |
| Charge-Pump Supply | Integrated on-chip charge pump | — |
| Power-Supply Topology | Single-supply RS-232 interface | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| Transmitter Channels | — | 2 |
| Receiver Channels | — | 2 |
| Supply Voltage Range | — | 3.0 V to 5.5 V |
| Maximum Data Rate | — | 1 Mbps |
| Charge-Pump Architecture | — | Dual charge pump |
| Transmitter Output Stage | — | Low-dropout design |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating for MAX3232CAE+] |
| Besleme Akımı | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Logic Compatibility | — | [DATA_NEEDED: logic input thresholds and output levels] |