SP485E vs MAX485CPA+ Comparación
Comparación detallada lado a lado de SP485E por MaxLinear y MAX485CPA+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ ActivoAnalog Devices
MAX485CPA+ - Low-Power RS-485/RS-422 Transceiver | Analog Devices
MAX485CPA+ ✓ ActivoComparación de especificaciones
| Parámetro | SP485E | MAX485CPA+ |
|---|---|---|
| Marca | MaxLinear | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Función | Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-duplex | — |
| Velocidad de datos | 2.5 Mbps (max, SP485E non-slew-limited) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Input Impedance | 12 kΩ minimum, 15 kΩ typical | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Range | −7 V to +12 V | — |
| ESD Protection (HBM) | ±15 kV | — |
| ESD Protection (IEC 61000-4-2 Air Discharge) | ±15 kV | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature] | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 8-pin NSOIC or PDIP | 8-pin PDIP |
| Tipo de montaje | Surface Mount (NSOIC) or Through-Hole (PDIP) | Through-hole |
| Process Technology | BiCMOS | — |
| Failsafe Receiver | Yes (open, shorted, idle bus) | — |
| Tri-State Enable Pins | Yes (DE, RE) | — |
| Estado RoHS | Compliant | unknown |
| Product Type | — | RS-485/RS-422 low-power transceiver |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | RS-485 and RS-422 |
| Signal Type | — | Differential |
| Slew Rate | — | Slew-rate-limited |
| Tensión de alimentación | — | [DATA_NEEDED: supply voltage] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |
| Lead-Free Status | — | unknown |