SP485E vs MAX485CPA+ 비교
다음의 상세 나란히 비교: SP485E 제조: MaxLinear 및 MAX485CPA+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SP485E | MAX485CPA+ |
|---|---|---|
| 브랜드 | MaxLinear | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 기능 | Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-duplex | — |
| 데이터 속도 | 2.5 Mbps (max, SP485E non-slew-limited) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Input Impedance | 12 kΩ minimum, 15 kΩ typical | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Range | −7 V to +12 V | — |
| ESD Protection (HBM) | ±15 kV | — |
| ESD Protection (IEC 61000-4-2 Air Discharge) | ±15 kV | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature] | [DATA_NEEDED: operating temperature range] |
| 패키지 | 8-pin NSOIC or PDIP | 8-pin PDIP |
| 실장 유형 | Surface Mount (NSOIC) or Through-Hole (PDIP) | Through-hole |
| Process Technology | BiCMOS | — |
| Failsafe Receiver | Yes (open, shorted, idle bus) | — |
| Tri-State Enable Pins | Yes (DE, RE) | — |
| RoHS 상태 | Compliant | unknown |
| Product Type | — | RS-485/RS-422 low-power transceiver |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | RS-485 and RS-422 |
| Signal Type | — | Differential |
| Slew Rate | — | Slew-rate-limited |
| 공급 전압 | — | [DATA_NEEDED: supply voltage] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |
| Lead-Free Status | — | unknown |