SP485REP-L vs SP485 Comparación
Comparación detallada lado a lado de SP485REP-L por Exar Corporation y SP485 por MaxLinear. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | SP485REP-L | SP485 |
|---|---|---|
| Marca | Exar Corporation | MaxLinear |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| Receiver Unit Load | 1/10 unit load | — |
| Supported Transceivers per Line | More than 400 transceivers | — |
| Receiver Input Impedance | 150 kOhm typical | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Propagation Delay | 60 ns | — |
| Minimum Operating Temperature | -40 C | — |
| Maximum Operating Temperature | +85 C | — |
| Duplex Configuration | Half-duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| Encapsulado | 8-pin plastic DIP | 8-Pin SOIC (NSOIC) |
| Tipo de montaje | Through-hole | Surface Mount |
| Driver Configuration | 1/1 differential driver | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Protocol | — | RS-485, RS-422 |
| Función | — | Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-Duplex |
| Velocidad de datos | — | 5 Mbps |
| Tensión de alimentación | — | 5 V |
| Operating Supply Current | — | [DATA_NEEDED: typical quiescent current in mA] |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: min/max operating temperature in °C] |
| Common-Mode Range | — | −7 V to +12 V |
| Driver Output Current | — | ±60 mA |
| Receiver Hysteresis | — | [DATA_NEEDED: typical hysteresis in mV] |
| ESD Protection (HBM, Bus Pins) | — | ±15 kV |
| Lead-Free | — | Yes |
| Nivel MSL | — | [DATA_NEEDED: MSL rating] |