SP485REP-L vs SP485 तुलना
विस्तृत दोनों ओर की तुलना SP485REP-L द्वारा Exar Corporation और SP485 द्वारा MaxLinear. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | SP485REP-L | SP485 |
|---|---|---|
| ब्रांड | Exar Corporation | MaxLinear |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| Receiver Unit Load | 1/10 unit load | — |
| Supported Transceivers per Line | More than 400 transceivers | — |
| Receiver Input Impedance | 150 kOhm typical | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Propagation Delay | 60 ns | — |
| Minimum Operating Temperature | -40 C | — |
| Maximum Operating Temperature | +85 C | — |
| Duplex Configuration | Half-duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| पैकेज | 8-pin plastic DIP | 8-Pin SOIC (NSOIC) |
| माउंटिंग प्रकार | Through-hole | Surface Mount |
| Driver Configuration | 1/1 differential driver | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Protocol | — | RS-485, RS-422 |
| फ़ंक्शन | — | Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-Duplex |
| डेटा दर | — | 5 Mbps |
| सप्लाई वोल्टेज | — | 5 V |
| Operating Supply Current | — | [DATA_NEEDED: typical quiescent current in mA] |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: min/max operating temperature in °C] |
| Common-Mode Range | — | −7 V to +12 V |
| Driver Output Current | — | ±60 mA |
| Receiver Hysteresis | — | [DATA_NEEDED: typical hysteresis in mV] |
| ESD Protection (HBM, Bus Pins) | — | ±15 kV |
| Lead-Free | — | Yes |
| MSL स्तर | — | [DATA_NEEDED: MSL rating] |