SP485REP-L vs SP485 Comparaison
Comparaison détaillée côte à côte de SP485REP-L par Exar Corporation et SP485 par MaxLinear. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | SP485REP-L | SP485 |
|---|---|---|
| Marque | Exar Corporation | MaxLinear |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| Receiver Unit Load | 1/10 unit load | — |
| Supported Transceivers per Line | More than 400 transceivers | — |
| Receiver Input Impedance | 150 kOhm typical | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Propagation Delay | 60 ns | — |
| Minimum Operating Temperature | -40 C | — |
| Maximum Operating Temperature | +85 C | — |
| Duplex Configuration | Half-duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| Boîtier | 8-pin plastic DIP | 8-Pin SOIC (NSOIC) |
| Type de montage | Through-hole | Surface Mount |
| Driver Configuration | 1/1 differential driver | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Protocol | — | RS-485, RS-422 |
| Fonction | — | Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-Duplex |
| Débit de données | — | 5 Mbps |
| Tension d'alimentation | — | 5 V |
| Operating Supply Current | — | [DATA_NEEDED: typical quiescent current in mA] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: min/max operating temperature in °C] |
| Common-Mode Range | — | −7 V to +12 V |
| Driver Output Current | — | ±60 mA |
| Receiver Hysteresis | — | [DATA_NEEDED: typical hysteresis in mV] |
| ESD Protection (HBM, Bus Pins) | — | ±15 kV |
| Lead-Free | — | Yes |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |