TJA1044VTKZ vs TJA1044VTZ Comparación
Comparación detallada lado a lado de TJA1044VTKZ por NXP Semiconductors y TJA1044VTZ por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TJA1044VTKZ | TJA1044VTZ |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | High-speed CAN transceiver with standby mode | — |
| Transceiver Type | Half (1/1) CAN transceiver | — |
| Maximum Data Rate | 1 Mbit/s | 5 Mbps |
| Supply Voltage VCC | 5 V nominal (CAN transceiver supply) | — |
| Logic Supply VIO | 3.3 V compatible (separate VIO pin) | — |
| Bus Lines | CANH, CANL differential two-wire bus | — |
| Interface Signals | TXD (input), RXD (output), S (standby control) | — |
| Standby Mode | Yes, controlled via S pin | — |
| Encapsulado | 8-HVSON (3x3 mm) with exposed pad | 8-pin SOIC |
| Package Type | 8-VDFN / HVSON with exposed thermal pad | — |
| Tipo de montaje | Surface Mount | Surface mount |
| Nivel MSL | 1 (unlimited floor life) | — |
| Peak Reflow Temperature | 260 °C | — |
| Qualification | VeLIO Certified | — |
| Product Family | Mantis high-speed CAN transceiver family | — |
| Target Segment | Automotive and industrial high-speed CAN networks | — |
| Number of Bus Nodes Supported | [DATA_NEEDED: maximum nodes per bus segment] | — |
| Bus Common-Mode Range | [DATA_NEEDED: bus common-mode voltage range] | — |
| Loopback Delay | [DATA_NEEDED: TXD to RXD propagation delay] | — |
| ESD Protection | [DATA_NEEDED: IEC 61000-4-2 ESD rating per pin] | — |
| Temperatura de funcionamiento | [DATA_NEEDED: junction/ambient operating temperature range] | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| Product Type | — | High-speed CAN transceiver with standby mode |
| Protocol | — | Controller Area Network (CAN) |
| Transmitter and Receiver Count | — | 1 transmitter / 1 receiver |
| Duplex Mode | — | Half duplex |
| Operating Modes | — | Normal and standby |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Receiver Hysteresis | — | 300 mV |
| Junction Temperature Range | — | -40°C to 150°C |
| Package Family | — | SOIC surface-mount family |
| Automotive Qualification | — | AEC-Q100 |
| Product Status | — | Active |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| CANH and CANL Bus Pins | — | [DATA_NEEDED: CANH and CANL bus-pin details] |