TJA1044VTKZ vs TJA1044VTZ तुलना
विस्तृत दोनों ओर की तुलना TJA1044VTKZ द्वारा NXP Semiconductors और TJA1044VTZ द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | TJA1044VTKZ | TJA1044VTZ |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Device Type | High-speed CAN transceiver with standby mode | — |
| Transceiver Type | Half (1/1) CAN transceiver | — |
| Maximum Data Rate | 1 Mbit/s | 5 Mbps |
| Supply Voltage VCC | 5 V nominal (CAN transceiver supply) | — |
| Logic Supply VIO | 3.3 V compatible (separate VIO pin) | — |
| Bus Lines | CANH, CANL differential two-wire bus | — |
| Interface Signals | TXD (input), RXD (output), S (standby control) | — |
| Standby Mode | Yes, controlled via S pin | — |
| पैकेज | 8-HVSON (3x3 mm) with exposed pad | 8-pin SOIC |
| Package Type | 8-VDFN / HVSON with exposed thermal pad | — |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| MSL स्तर | 1 (unlimited floor life) | — |
| Peak Reflow Temperature | 260 °C | — |
| Qualification | VeLIO Certified | — |
| Product Family | Mantis high-speed CAN transceiver family | — |
| Target Segment | Automotive and industrial high-speed CAN networks | — |
| Number of Bus Nodes Supported | [DATA_NEEDED: maximum nodes per bus segment] | — |
| Bus Common-Mode Range | [DATA_NEEDED: bus common-mode voltage range] | — |
| Loopback Delay | [DATA_NEEDED: TXD to RXD propagation delay] | — |
| ESD Protection | [DATA_NEEDED: IEC 61000-4-2 ESD rating per pin] | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: junction/ambient operating temperature range] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| Product Type | — | High-speed CAN transceiver with standby mode |
| Protocol | — | Controller Area Network (CAN) |
| Transmitter and Receiver Count | — | 1 transmitter / 1 receiver |
| Duplex Mode | — | Half duplex |
| Operating Modes | — | Normal and standby |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Receiver Hysteresis | — | 300 mV |
| Junction Temperature Range | — | -40°C to 150°C |
| Package Family | — | SOIC surface-mount family |
| Automotive Qualification | — | AEC-Q100 |
| Product Status | — | Active |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| CANH and CANL Bus Pins | — | [DATA_NEEDED: CANH and CANL bus-pin details] |