TJA1044VTKZ vs TJA1044VTZ Perbandingan
Perbandingan bersamaan detil TJA1044VTKZ dari NXP Semiconductors dan TJA1044VTZ dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TJA1044VTKZ | TJA1044VTZ |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | High-speed CAN transceiver with standby mode | — |
| Transceiver Type | Half (1/1) CAN transceiver | — |
| Maximum Data Rate | 1 Mbit/s | 5 Mbps |
| Supply Voltage VCC | 5 V nominal (CAN transceiver supply) | — |
| Logic Supply VIO | 3.3 V compatible (separate VIO pin) | — |
| Bus Lines | CANH, CANL differential two-wire bus | — |
| Interface Signals | TXD (input), RXD (output), S (standby control) | — |
| Standby Mode | Yes, controlled via S pin | — |
| Paket | 8-HVSON (3x3 mm) with exposed pad | 8-pin SOIC |
| Package Type | 8-VDFN / HVSON with exposed thermal pad | — |
| Tipe Mounting | Surface Mount | Surface mount |
| Level MSL | 1 (unlimited floor life) | — |
| Peak Reflow Temperature | 260 °C | — |
| Qualification | VeLIO Certified | — |
| Product Family | Mantis high-speed CAN transceiver family | — |
| Target Segment | Automotive and industrial high-speed CAN networks | — |
| Number of Bus Nodes Supported | [DATA_NEEDED: maximum nodes per bus segment] | — |
| Bus Common-Mode Range | [DATA_NEEDED: bus common-mode voltage range] | — |
| Loopback Delay | [DATA_NEEDED: TXD to RXD propagation delay] | — |
| ESD Protection | [DATA_NEEDED: IEC 61000-4-2 ESD rating per pin] | — |
| Suhu Kerja | [DATA_NEEDED: junction/ambient operating temperature range] | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| Product Type | — | High-speed CAN transceiver with standby mode |
| Protocol | — | Controller Area Network (CAN) |
| Transmitter and Receiver Count | — | 1 transmitter / 1 receiver |
| Duplex Mode | — | Half duplex |
| Operating Modes | — | Normal and standby |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Receiver Hysteresis | — | 300 mV |
| Junction Temperature Range | — | -40°C to 150°C |
| Package Family | — | SOIC surface-mount family |
| Automotive Qualification | — | AEC-Q100 |
| Product Status | — | Active |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| CANH and CANL Bus Pins | — | [DATA_NEEDED: CANH and CANL bus-pin details] |