10AX115U2F45E1SG - Arria 10 GX FPGA 1.15M LE | Intel
N.º de pieza: 10AX115U2F45E1SG ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $18500 | $18.500,00 |
| 10 | $17200 | $172.000,00 |
| 25 | $16450 | $411.250,00 |
| 100 | $14800 | $1.480.000,00 |
| 250 | $13900 | $3.475.000,00 |
10AX115U2F45E1SG Descripción general
An FPGA (Field Programmable Gate Array) is a class of programmable logic device containing an array of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, high-speed transceivers, and programmable I/O cells, all interconnected via a programmable routing fabric. FPGAs sit above Application-Specific Standard Products (ASSPs) in flexibility and below Application-Specific Integrated Circuits (ASICs) in unit cost and per-unit power; Arria 10 specifically occupies Intel's mid-range tier between Cyclone 10 (cost-optimized) and Stratix 10 (high-end). This part is part of the broader programmable logic category inside semiconductors, alongside CPLDs, microcontrollers, and DSPs.
Key features include 1,150,000 logic elements, 68.86 Mbits of embedded SRAM, 1,518 embedded 18x18 multipliers, six hard memory controllers supporting DDR4/DDR3/QDRII+/RLDRAM3, and 24 backplane-capable transceivers. The device operates from a 0.9 V core supply with separate transceiver and auxiliary rails, and supports -40C to +100C (E1SG = extended industrial) junction temperature. The 1932-ball FCBGA uses a 45 x 45 mm body with a 1.0 mm ball pitch and an integrated heat-spreader-compatible lid.
Architecturally, the Arria 10 GX family introduced a hard floating-point DSP block and a partial reconfiguration region controller that enables runtime swapping of FPGA fabric without halting adjacent logic. The 20 nm SoC-style back end-of-line enables lower static leakage than the 28 nm prior generation while sustaining transceiver line rates suitable for 100G Ethernet aggregation and CPRI wireless fronthaul.
Typical applications include 4K/8K broadcast video processing, 100G Ethernet switching fabrics, PCIe Gen3 acceleration cards, radar and electronic-warfare DSP front-ends, and medical imaging reconstruction. The combination of transceiver bandwidth and floating-point DSP makes the device equally suited to wireline backhaul and software-defined radio prototyping.
When designing with this FPGA, ensure the PCB supports the 1932-ball BGA escape routing (typically 1.0 mm pitch with microvia stack-ups) and provides a thermal solution sized for 25-40 W typical board power. Quartus Prime software is mandatory for synthesis, place-and-route, and bitstream generation; legacy Quartus II is no longer supported for this device.
This page synthesizes distributor pricing, in-stock availability, same-family Arria 10 drop-in alternatives, and practical board-design notes not found in the manufacturer datasheet alone, giving procurement and hardware engineers an at-a-glance view of the part's position in the Arria 10 lineup.
Alternativas directas para 10AX115U2F45E1SG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con 10AX115U2F45E1SG (mismo factor de forma y huella) — difiere en Package, Process Node, Speed Grade, Embedded Memory Bits, Hard Memory Controllers.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
10AX115U2F45I1SG
✅ Sustitución directa✓ En stock
Consulte el precio
Ver hoja de datos →10AX115U1F45E1SG
✅ Sustitución directa✓ En stock
$5680 / unidad
Ver hoja de datos →10AX115U2F45E2SG
✅ Sustitución directa✓ En stock
$6920.66 / unidad
Ver hoja de datos →10AX115N2F45E1SG
✅ Sustitución directa✓ En stock
$6240 / unidad
Ver hoja de datos →10AX090U2F45E1SG
✅ Sustitución directa✓ En stock
$5895 / unidad
Ver hoja de datos →10AX115S2F45E2SG
✅ Sustitución directa✓ En stock
$6975.76 / unidad
Ver hoja de datos →10AX115U2F45E1SG Valores máximos y características eléctricas
| Family | Arria 10 GX |
| Logic Elements | 1,150,000 |
| Embedded Memory (bits) | 68,857,600 |
| Embedded Memory (Mbits) | 68.86 Mbit |
| 18x18 Multipliers | 1,518 |
| User I/O Pins | 480 |
| Transceiver Channels | 24 |
| Max Transceiver Data Rate | 17.4 Gbps (chip-to-chip/backplane) |
| Hard Memory Controllers | 6 (DDR4/DDR3/QDRII+/RLDRAM3) |
| PCIe Hard IP | PCIe Gen3 x8 |
| Process Node | TSMC 20 nm |
| Core Voltage | 0.9 V |
| Encapsulado | 1932-ball FCBGA, 45 x 45 mm, 1.0 mm pitch |
| Grade | E1 (extended industrial, -40C to +100C) |
| Estado RoHS | Compliant |
Guía de configuración de pines de 10AX115U2F45E1SG 1932-ball fcbga, 45 x 45 mm, 1.0 mm pitch
Configuración de pines para 10AX115U2F45E1SG (encapsulado 1932-ball fcbga, 45 x 45 mm, 1.0 mm pitch). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para 10AX115U2F45E1SG.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
10AX115U2F45E1SG es adecuado para 6 aplicacións: 4K/8K Broadcast Video Processing, 100G Ethernet Aggregation Switch Fabric, PCIe Gen3 x8 Acceleration Card, Radar and EW Digital Signal Processing, Software Defined Radio (SDR) Prototyping, Medical Imaging Reconstruction (CT/MRI).
4K/8K Broadcast Video Processing
The 10AX115U2F45E1SG fits 4K/8K broadcast video processing because its 1,150,000 logic elements and 1,518 hard 18x18 multipliers absorb multi-channel HEVC/H.265 encode/decode pipelines without taxing external DSP chips. The 480 user I/Os feed 12G-SDI/DisplayPort 1.4 receive and transmit PHYs in parallel, while 24 transceivers at up to 17.4 Gbps aggregate uncompressed 8K video at 60 fps. Placed as the central bridge between SDI ingest and PCIe Gen3 x8 host offload, the device dissipates ~30 W typical board power, requiring a moderate aluminum heatsink or top-side heat spreader.
Recomendado
100G Ethernet Aggregation Switch Fabric
For 100G Ethernet aggregation, the 10AX115U2F45E1SG delivers 24 backplane-capable transceivers at 17.4 Gbps that, when combined across 12 lanes per port, enable two 100G (CAUI-10) ports or six 40G (XLAUI) ports per device. The hard PCIe Gen3 x8 IP provides a low-latency host control plane, while the 68.86 Mbits of embedded memory buffers line-rate traffic without external RLDRAM. The part's 0.9 V core and 25-40 W typical dissipation make it suitable for line-card designs that reuse existing Arria 10 thermal solutions.
Recomendado
PCIe Gen3 x8 Acceleration Card
The 10AX115U2F45E1SG accelerates host-offloaded workloads through its hard PCIe Gen3 x8 endpoint, which delivers ~8 GT/s link bandwidth without consuming FPGA fabric. The 1,150 K LEs and 1,518 multipliers implement NVMe controller logic, deep-learning inference engines, or financial Monte-Carlo pipelines, while 24 transceivers link to companion FPGAs in a coprocessor mesh. Typical board power is 25-35 W, allowing passive heat-spreader cooling in full-height half-length PCIe cards.
Recomendado
Radar and EW Digital Signal Processing
The 10AX115U2F45E1SG handles radar and electronic-warfare DSP front-ends because its hard floating-point DSP blocks perform FFT and pulse-Doppler processing at sample rates up to 400 MHz per channel. The 68.86 Mbits of embedded SRAM holds windowing and overlap-add coefficient tables, while 24 transceivers at 17.4 Gbps stream digitized antenna samples from RF ADCs. Per Intel's Arria 10 design examples, two such devices in a master-slave configuration can process 256-element phased-array data with margin.
Recomendado
Software Defined Radio (SDR) Prototyping
The 10AX115U2F45E1SG's 24 transceivers support multi-band SDR prototyping from HF to 6 GHz with up to 17.4 Gbps per channel, making the device well-suited for software-defined base-station and tactical-radio research. The 1,150 K LEs host full soft-modem stacks (LTE, 5G NR, custom waveforms), while the embedded memory buffers real-time IQ samples at hundreds of MSPS. Power consumption of 25-40 W is acceptable for laboratory chassis with forced-air cooling.
Recomendado
Medical Imaging Reconstruction (CT/MRI)
The 10AX115U2F45E1SG accelerates CT and MRI back-projection reconstruction because its 1,518 hard multipliers deliver the parallel MAC throughput required for filtered back-projection of 1024 x 1024 slices in real time. The 6 hard DDR4 controllers stream raw projection data at >25 GB/s aggregate, while 24 transceivers link to detector ASICs over high-speed serial. The device's -40C to +100C extended industrial grade suits imaging carts that require IEC 60601 thermal margin.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para 10AX115U2F45E1SG — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | 10AX115U2F45I1SG | 10AX115U1F45E1SG | 10AX115U2F45E2SG | 10AX115N2F45E1SG | 10AX090U2F45E1SG |
|---|---|---|---|---|---|---|
| Package | 1932-ball FCBGA | 1932-ball FCBGA - same | 1932-ball FCBGA - same | 1932-ball FCBGA - same | 1932-ball FCBGA - same | 1932-ball FCBGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 1,150,000 | 1,150,000 | 1,150,000 | 1,150,000 | 1,150,000 | 900,000 |
| Embedded Memory (Mbit) | 68.86 | 68.86 | 68.86 | 68.86 | 68.86 | 53.42 |
| Transceiver Channels | 24 | 24 | 24 | 24 | 24 | 24 |
| Max Transceiver Rate (Gbps) | 17.4 | 17.4 | 17.4 | 17.4 | 28.05 | 17.4 |
| Speed Grade | -2 | -2 | -1 | -2 | -2 | -2 |
| Transceiver Family | GX (17.4 Gbps) | GX | GX | GX | GT (28 Gbps) | GX |
| User I/O Pins | 480 | 480 | 480 | 480 | 480 | 480 |
| Temperature Grade | Extended Industrial (-40C to +100C) | Industrial (-40C to +100C) | Extended Industrial | Extended Industrial | Extended Industrial | Extended Industrial |
Diferenciadores clave
- 17.4 Gbps backplane-capable transceivers with built-in PCIe Gen3 x8 hard IP (frente a 10AX115S2F45E2SG)
- Higher-density 1,150 K LE over 900 K LE sibling with same package (frente a 10AX090U2F45E1SG)
- Lower-bandwidth GX vs higher-bandwidth GT for cost-optimized designs (frente a 10AX115N2F45E1SG)
Notas de diseño
The 1932-ball FCBGA requires a 1.0 mm pitch microvia PCB stack-up (typically 1+2+1 or 2+4+2 with 100 um via-in-pad plating). Escape routing must use staggered microvias on the inner layers to maintain impedance control for transceiver lanes. Per Intel's Arria 10 PCB design guidelines, top-layer component placement should leave at least 5 mm clearance around the BGA to accommodate the heat-spreader lid and decoupling capacitors placed within 100 mils of the balls.
Estimated: at typical usage (15-20% transceiver utilization, 60% logic utilization, 400 MHz DDR4) the device dissipates 25-35 W. With a junction-to-ambient theta_JA of approximately 1.5 C/W (FCBGA with integrated heat spreader and 200 LFM airflow), the junction temperature rises 38-53 C above ambient. Mount a copper lid heat-spreader with a 1-2 mm gap filled with thermal interface material rated for at least 3 W/m-K. Without forced airflow, derate clock speeds by one speed grade to stay below 100 C Tj.
The 0.9 V core rail can draw up to 35 A peak transients during configuration and high-utilization DSP bursts; design the regulator (typically a multi-phase controller like the ISL6388 or LTM4677) with at least 30% headroom and 200 uF of bulk ceramic plus 22 uF of high-frequency decoupling within the BGA footprint. Add 0.1 uF and 1 nF X7R capacitors within 100 mils of every supply ball. Sequence rails (0.9 V core before 1.8 V transceiver PLL) using a dedicated sequencer such as the LTC2923 to avoid latch-up.
A common mistake is selecting a generic IBIS model from a third-party distributor rather than the Intel-validated IBIS-AMI files - this can mispredict transceiver eye margins by 20-30 dB. Always run channel simulation with the official Intel-provided IBIS-AMI model that matches the specific speed grade (-1 vs -2) and transceiver sub-variant (GX vs GT). Another frequent pitfall is forgetting that Arria 10 configuration files (.sof) generated with Quartus II are not compatible with Quartus Prime Pro; re-synthesize any legacy IP using the latest library to avoid bitstream load failures.
Información de cumplimiento
RoHS and REACH compliant per Intel material declaration. Not AEC-Q100 qualified (industrial/extended industrial grade only). Halogen-free per JEDEC JS709B.
