Analog Devices

AD745SQ - 20 MHz Ultra-Low-Noise JFET Op Amp | ADI

N.º de pieza: AD745SQ ✗ Fin de vida
8 mA Vdss 8-pin CERDIP Package
MOQ: 1 |

AD745SQ Descripción general

Analog Devices AD745SQ is an ultralow-noise, high-speed, JFET-input operational amplifier with a 20 MHz gain-bandwidth product and a 12.5 V/µs slew rate, housed in an 8-pin CERDIP through-hole package. The device combines the low voltage noise associated with bipolar input amplifiers with the very low input bias current characteristic of a field-effect transistor input stage. Its one-amplifier configuration supports precision signal conditioning, instrumentation, and high-impedance analog front ends.

A JFET-input operational amplifier is a voltage-feedback amplifier whose input stage uses junction field-effect transistors. Within the semiconductor hierarchy, it belongs to the operational-amplifier, analog-amplifier, and integrated-amplifier categories. This input architecture is particularly useful when measuring or amplifying signals from high-impedance sensors because it can combine high input impedance, low bias current, low input noise, and wide signal bandwidth in a single monolithic circuit.

The AD745 family is identified for its ultralow-noise, high-speed operation. The published 20 MHz gain-bandwidth figure supports closed-loop bandwidth beyond the 10 V/µs range with suitable feedback networks, while the 12.5 V/µs slew rate allows large-amplitude signals to be reproduced with relatively low distortion. Its operating supply current is 8 mA, and the specified temperature range extends from -55°C to 125°C. Exact voltage-noise, input-bias-current, input-offset-voltage, and supply-voltage limits should be taken from the AD745 manufacturer datasheet for the selected temperature and supply conditions.

BiFET input stages provide a practical compromise between bipolar and CMOS input amplifiers. Bipolar inputs commonly offer low voltage noise, while FET inputs minimize input bias current and simplify the drive of high-source-impedance transducers. The AD745SQ uses this architecture for applications requiring both bandwidth and low-noise signal handling. Its voltage-noise and common-mode performance remain sensitive to circuit configuration, so resistor values, source impedance, and feedback topology must be evaluated together rather than as isolated specifications.

Typical uses include low-level transducer amplification, audio and instrumentation signal chains, laboratory measurement systems, and precision analog filters. The 8-pin CERDIP package also makes the AD745SQ suitable for legacy industrial and scientific equipment that uses through-hole op-amp footprints. Because Analog Devices marks the AD745 family as not recommended for new designs, engineers should verify long-term availability and consider a currently recommended amplifier for new production programs.

For a new PCB, do not substitute a surface-mount amplifier without confirming that its electrical performance, supply requirements, pin function, stability behavior, and thermal characteristics satisfy the original design. For an existing 8-pin CERDIP board, preserve adequate supply decoupling, route the feedback loop for minimum parasitic capacitance, and avoid using a long input trace next to high-current switching nodes. These practices help preserve the intended bandwidth and noise performance.

This product page combines the AD745 family specifications, lifecycle information, package details, sourcing guidance, and design-focused guidance for the AD745SQ. It also distinguishes true same-package alternatives from broader functional equivalents, helping engineers make a drop-in decision without confusing electrical similarity with PCB compatibility.

Alternativas directas para AD745SQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

AD745AQ

✅ Sustitución directa
Analog Devices
📦 8-pin CERDIP
Voltage-feedback operational amplifier · JFET · 1 amplifier · 20 MHz · 12.5 V/us · 1 mV · 250 pA · 90 dB

Consulte el precio

Ver hoja de datos →

AD745SQ Valores máximos y características eléctricas

Amplifier Type JFET-input operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 20 MHz
Slew Rate 12.5 V/µs
Corriente de alimentación 8 mA
Rango de temperatura de funcionamiento -55°C to +125°C
Encapsulado 8-pin CERDIP
Tipo de montaje Through-hole
AEC-Q100 Qualification Not applicable

Guía de configuración de pines de AD745SQ 8-pin cerdip

Configuración de pines para AD745SQ (encapsulado 8-pin cerdip). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-pin cerdip para AD745SQ

No hay datos detallados de patillaje disponibles para AD745SQ.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD745SQ es adecuado para 6 aplicacións: Precision Transducer Signal Conditioning, High-Input-Impedance Measurement Front End, Laboratory Audio Preamplifier, Precision Analog Filter, Legacy Scientific Instrument Repair, Low-Level Sensor Buffer.

🏭

Precision Transducer Signal Conditioning

The AD745SQ is appropriate for amplifying weak sensor signals where low input bias current is needed to avoid loading the source. Its JFET input stage supports high-impedance sensing, while the 20 MHz gain-bandwidth product and 12.5 V/µs slew rate provide useful bandwidth for sensors with moderately fast transients. Place the amplifier close to the transducer, use short guarded input routes, and select feedback resistors that keep the closed-loop noise acceptable. The main trade-off is that a legacy 8-CERDIP package and not-recommended-for-new-designs status make this choice more appropriate for maintenance than unrestricted new development.

🧩

High-Input-Impedance Measurement Front End

The AD745SQ can serve as the first amplification stage in a high-input-impedance measurement front end because its BiFET input architecture combines very low input current with low voltage noise. The 20 MHz bandwidth is substantially higher than the bandwidth normally required for static bridge or potentiometer signals, preserving rise time during transient tests. To prevent errors, calculate the bias-current offset for the actual source impedance and evaluate the source capacitance against the closed-loop gain. Board layout should isolate high-impedance nodes from clock, relay, and power-converter traces to preserve measurement accuracy.

🎧

Laboratory Audio Preamplifier

The AD745SQ is suitable for a low-level laboratory audio preamplifier when low noise and adequate bandwidth are both important. Its 12.5 V/µs slew rate and 20 MHz gain-bandwidth product support audio signals well beyond the conventional 20 kHz band while preserving low-noise operation from a JFET input stage. The amplifier should operate with feedback values that maintain stability at the intended closed-loop gain, and input biasing must avoid adding unnecessary thermal noise. Verify output swing against the selected load and supply voltage, especially when designing a microphone or line-level input with large transient peaks.

🔧

Precision Analog Filter

The AD745SQ can implement active analog filtering where a low-noise, high-input-impedance stage is required. Its 20 MHz gain-bandwidth product leaves bandwidth margin above many sensor-band filter sections, while the 12.5 V/µs slew rate helps preserve low distortion in moderate-amplitude signals. Component tolerances and the amplifier's gain-bandwidth behavior affect the realized filter response, so simulation should include realistic source and load impedances. Keep feedback loops compact, place input and output decoupling according to the datasheet guidance, and verify stability before using the circuit at the highest intended closed-loop gain.

🖥️

Legacy Scientific Instrument Repair

AD745SQ is especially relevant to maintenance of legacy scientific instruments that use an 8-pin CERDIP JFET operational amplifier. The specified operating temperature range of -55°C to +125°C supports harsh laboratory and industrial environments, while the established through-hole package facilitates socketed or PCB-level replacement. Before installation, compare the complete ordering code, package dimensions, and electrical limits with the removed device. Because the manufacturer marks the family as not recommended for new designs, use the replacement for maintaining proven equipment unless a longevity review approves continued incorporation in new builds.

💊

Low-Level Sensor Buffer

The AD745SQ works as a buffer or gain stage for low-level sensors requiring both high input impedance and low voltage noise. The JFET input architecture minimizes bias-current loading, and the 20 MHz gain-bandwidth product allows the stage to retain useful bandwidth when configured for modest gain. The design should account for sensor noise, amplifier noise, resistor noise, and the parallel combination of input bias current and source resistance. A low-noise reference and appropriately decoupled supply are also important because reference or supply noise can dominate the sensor signal. Confirm operation across the complete temperature range when precision drift matters.

Resumen de productos recomendados

AD745AQ Same-family AD745 ordering option Se usa en: Precision Transducer Signal Conditioning, High-Input-Impedance Measurement Front End, Laboratory Audio Preamplifier, Precision Analog Filter, Legacy Scientific Instrument Repair, Low-Level Sensor Buffer AD745JN Related AD745 amplifier family option Se usa en: Precision Transducer Signal Conditioning, High-Input-Impedance Measurement Front End, Laboratory Audio Preamplifier, Precision Analog Filter, Legacy Scientific Instrument Repair, Low-Level Sensor Buffer
What are the key specifications of AD745SQ that engineers should know?
The AD745SQ is a single-amplifier JFET-input operational amplifier with a 20 MHz gain-bandwidth product, 12.5 V/µs slew rate, 8 mA supply current, and an operating temperature range of -55°C to +125°C. According to the Analog Devices AD745 manufacturer datasheet, the part is designed to combine ultralow voltage noise with very low input bias current. It is supplied in an 8-pin CERDIP through-hole package, making it particularly relevant to legacy instrumentation and precision analog equipment.
Where can I download the AD745SQ datasheet PDF?
The official AD745SQ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD745.pdf. According to the Analog Devices product page, the AD745 documentation is Data Sheet Rev. D and the family is not recommended for new designs. Use the manufacturer document for the authoritative package drawing, electrical characteristics, test conditions, pin descriptions, ordering information, and application guidance.
What is the AD745SQ pinout?
The AD745SQ uses an 8-pin CERDIP through-hole package, but its complete numbered pin list must be taken from the AD745 manufacturer datasheet rather than inferred from a generic ceramic-DIP drawing. The device is a single operational amplifier with differential inputs, an output, supply connections, offset-null positions, and a remaining connection according to the official pin-description table. Consult that table before assigning PCB tracks or socket wiring.
Is the AD745SQ suitable for high-impedance sensor amplifiers?
Yes, the AD745SQ is suitable for high-impedance sensor amplification because its JFET input stage provides very low input bias current while retaining low voltage noise and a 20 MHz gain-bandwidth product. According to the Analog Devices AD745 manufacturer datasheet, the device combines characteristics normally associated with bipolar-input amplifiers and FET-input devices. Sensor source impedance, input bias current, input capacitance, and noise should be checked together because the optimum gain and bandwidth depend on the complete source network.
Where can I buy AD745SQ online?
Use the Request a Quote form on this page to request availability, quantity pricing, and lead time for the exact AD745SQ ordering code. Analog Devices identifies AD745SQ as an 8-CERDIP member of the AD745 family, while current inventory may vary because the family is marked as not recommended for new designs. Confirm the package suffix and manufacturer specifications before placing an order so that a different AD745 package variant is not substituted unintentionally.
What is the price of AD745SQ?
The current commercial price for AD745SQ should be requested through the Request a Quote form on this page. The part is a legacy 8-CERDIP ordering option within an amplifier family that Analog Devices marks as not recommended for new designs, so market conditions and exact package availability can change. Provide the required quantity, target date, and shipping destination in the request to obtain a current quotation for this exact MPN.
What is the lead time for AD745SQ?
Request the current AD745SQ lead time through the Request a Quote form on this page. Lead time depends on manufacturer inventory, package quantity, order volume, and whether the order is for maintenance of an existing design. Because Analog Devices marks the AD745 family as not recommended for new designs, buyers should state whether the requirement is a small replacement order or a planned production run and should request written confirmation of the delivery schedule.
Is AD745SQ in stock?
Current AD745SQ stock should be confirmed through the Request a Quote form on this page. The manufacturer product page states that AD745 is not recommended for new designs, which makes existing legacy inventory and scheduled supply important considerations. Submit the exact MPN, quantity, and required delivery date, and request confirmation of package condition and traceability for any maintenance, repair, or obsolescence-management procurement.
AD745SQ versus AD745AQ: which is better for legacy instrumentation?
AD745SQ and AD745AQ are closely related AD745 family members, but the choice should account for their ordering and qualification codes. The published family description identifies the AD745 as an ultralow-noise, high-speed BiFET amplifier with 20 MHz bandwidth and approximately 12.5 V/µs slew rate. AD745SQ is explicitly identified as 8-CERDIP, while the manufacturer and comparison pages list AD745AQ as another package/order option. Verify exact suffix details in the ordering table before substitution.
What is the difference between AD745SQ and AD745AQ?
AD745SQ and AD745AQ belong to the same Analog Devices AD745 JFET operational-amplifier family and are associated with the same core performance class, including 20 MHz bandwidth and approximately 12.5 V/µs slew rate. The relevant distinction is their order code and associated qualification or package designation. According to the Analog Devices AD745 manufacturer datasheet and the AD745SQ-versus-AD745AQ comparison page, engineers should confirm the exact suffix, package, and qualification before treating either part as interchangeable.
When should I choose AD745SQ over another AD745 family option?
Choose AD745SQ when the existing PCB requires an 8-pin CERDIP footprint and the application benefits from the AD745 family's combination of JFET input current, low noise, 20 MHz bandwidth, and 12.5 V/µs slew rate. Do not choose it for a new design without checking lifecycle alternatives, because Analog Devices marks the family as not recommended for new designs. For new products, prioritize a currently recommended amplifier with compatible supply, noise, bias-current, and stability requirements.
Is AD745SQ suitable for audio and low-level instrumentation?
Yes, AD745SQ fits audio and low-level instrumentation when the circuit requires low-noise amplification, low input current, and substantially more bandwidth than a general-purpose precision op amp. Its 20 MHz gain-bandwidth product and 12.5 V/µs slew rate allow it to reproduce signals within the passband of suitable closed-loop configurations. According to the Analog Devices AD745 manufacturer datasheet, system noise should be evaluated with the actual source impedance and gain because resistor noise and source impedance can dominate at high closed-loop gain.
What can replace AD745SQ?
AD745AQ is the closest documented same-family option identified for AD745SQ, but it should be treated as a candidate replacement only after confirming the exact package, qualification, and electrical ordering data. The AD745SQ-versus-AD745AQ comparison page identifies a relationship between the two parts, while the Analog Devices AD745 manufacturer datasheet remains the controlling document. No cross-brand amplifier can be called a true drop-in replacement without a verified 8-pin CERDIP pinout and equivalent performance.
Is AD745SQ the same as AD745AQ?
No, AD745SQ and AD745AQ are distinct order codes within the AD745 family, even though they share the family's core JFET-input amplifier architecture and major speed characteristics. AD745SQ is explicitly identified as the 8-CERDIP version. The suffix can affect package or qualification attributes, so use the manufacturer ordering table to verify whether AD745AQ is mechanically and electrically interchangeable for the specific installed socket or board.
What is the best cross-brand equivalent for AD745SQ?
No cross-brand equivalent can be confirmed as a true drop-in replacement for AD745SQ from the documented cross-reference results. A valid replacement would need an exact 8-pin CERDIP footprint, matching pin functions, compatible supply voltage, low input bias current, low noise, adequate 20 MHz-class bandwidth, and stable operation with the intended feedback network. The Analog Devices AD745 manufacturer datasheet should be used as the target specification, followed by bench validation before approving any substitute.

Datos de referencia de ingeniería para AD745SQ — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose AD745SQ when maintaining an existing 8-pin CERDIP design that requires the AD745 family's JFET input characteristics, low voltage noise, 20 MHz gain-bandwidth product, and 12.5 V/µs slew rate. It is particularly suitable for high-impedance transducers, precision instrumentation, laboratory audio, and active filtering where low input bias current and bandwidth must coexist. Verify the exact supply, noise, bias-current, common-mode, and stability requirements before fitting it to a board. AD745AQ is the closest same-family ordering option identified for review, but confirm its package and qualification details in the manufacturer ordering table. For a genuinely new design, select a currently recommended amplifier because Analog Devices marks the AD745 family as not recommended for new designs. Do not approve a cross-brand replacement solely from generic functional similarity; it must have a verified 8-pin CERDIP footprint, compatible pin functions, and equivalent electrical performance.

Comparación con alternativas

Parámetro Este producto AD745AQ
Brand Analog Devices Analog Devices
Package 8-pin CERDIP 8-pin CERDIP
Amplifier Architecture JFET-input operational amplifier JFET-input operational amplifier
Number of Circuits 1 circuit 1 circuit
Gain-Bandwidth Product 20 MHz 20 MHz
Slew Rate 12.5 V/µs 12.5 V/µs
Supply Current 8 mA 8 mA
Operating Temperature Range -55°C to +125°C -55°C to +125°C
Lifecycle Status Not recommended for new designs Not recommended for new designs

Diferenciadores clave

  • Combines JFET input behavior with high-speed amplification (frente a AD745AQ)
  • Supports wide operating temperature range (frente a AD745AQ)
  • Maintains low quiescent supply demand (frente a AD745AQ)

Notas de diseño

Route both input and feedback connections as short and compact as possible because parasitic capacitance in the feedback loop can reduce stability at high closed-loop gain. For high-impedance inputs, use a guarded or guarded-plus-driven layout where practical, keep the amplifier close to the source, and avoid routing sensitive nodes beside switching-regulator, relay, and digital-clock traces. This is especially important when the source impedance is high enough that bias-current and thermal-noise effects dominate the measurement.

Use the supply voltages and decoupling arrangement specified by the Analog Devices AD745 manufacturer datasheet. Keep the regulator or supply trace short, provide local high-frequency bypass at the device, and avoid sharing long supply-return paths with noisy output stages. Since the published supply current is 8 mA, power capacity is rarely the primary limitation; the more important checks are voltage tolerance, output-current margin under transient load, and the noise contribution of the selected supply topology.

Do not treat every AD745 order code as mechanically interchangeable. AD745SQ is identified as the 8-CERDIP ordering option, and any replacement must be checked against the official package drawing, pin descriptions, qualification code, and electrical limits. In addition, the AD745 family is marked as not recommended for new designs. For legacy maintenance, confirm the removed device and candidate suffix carefully; for new equipment, evaluate a currently recommended amplifier with verified noise, input-current, bandwidth, slew-rate, supply, and stability characteristics.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact AD745SQ ordering code. The component is an analog operational amplifier and is not an automotive-qualified AEC-Q100 device.

Datos verificados el: 2026-11-14 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD745SQ datasheet AD745SQ specifications AD745SQ pinout AD745SQ datasheet pdf AD745SQ 8 CERDIP amplifier AD745SQ 20 MHz op amp AD745SQ equivalent AD745SQ replacement AD745SQ cross reference AD745SQ vs AD745AQ AD745SQ price AD745SQ stock Analog Devices AD745SQ AD745SQ application circuit AD745SQ low noise amplifier

Componentes & términos relacionados

Analog Devices AD745 AD745SQ AD745AQ AD745JN operational amplifier voltage-feedback amplifier analog amplifier integrated amplifier BiFET input JFET input junction field-effect transistor gain-bandwidth product slew rate input bias current voltage noise precision signal conditioning 8-pin CERDIP CERDIP package through-hole package high-impedance sensor active filter Analog Devices AD745 manufacturer datasheet instrumentation amplifier
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ