Analog Devices

AD842KH - 80MHz Wideband High-Output Op Amp | Analog Devices

N.º de pieza: AD842KH ✓ Activo
1 mV Vdss 8 µA Id TO-8-12 Package
MOQ: 1 |

AD842KH Descripción general

The Analog Devices AD842KH is a single-channel, wideband operational amplifier with an 80 MHz gain-bandwidth product at a gain of 2, 375 V/µs slew rate, and a TO-8-12 hermetic package. The device combines an 80 MHz gain-bandwidth product with settling to 0.01% after a 10 V step and a full-power bandwidth of 6.0 MHz for a 20 V peak-to-peak output. Its maximum input offset voltage is specified as 1 mV.

An operational amplifier is a high-gain analog signal-conditioning component used to amplify voltage differences, buffer sensors, drive analog-to-digital converters, and implement active filters. The AD842 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. It is fabricated with Analog Devices' junction-isolated complementary bipolar process, combining dc precision with wideband ac performance.

Key features include stable operation at gains of 2 or greater, an 80 MHz gain-bandwidth product, and 375 V/µs slew rate. The amplifier settles to within 0.01% following a 10 V step, making it useful in systems requiring rapid recovery after a large input transition. Its 6.0 MHz full-power bandwidth supports high-amplitude waveform amplification, while the 1 mV maximum input offset voltage supports accurate dc-coupled signal conditioning.

The junction-isolated complementary bipolar architecture is designed to provide wideband operation while retaining low offset voltage. When configured for a gain of 2, the AD842 provides its specified 80 MHz gain-bandwidth product. The 375 V/µs slew rate supports high-frequency signal movement, and the 6.0 MHz full-power bandwidth applies to a 20 V peak-to-peak output. Engineers should use the manufacturer datasheet for gain, output-current, supply-voltage, noise, and stability limits before finalizing a circuit.

Typical uses include video and imaging signal chains, waveform generation, data-acquisition front ends, high-speed instrumentation, and active analog filtering. The fast settling characteristic is particularly useful when the amplifier must recover quickly after a step input. The hermetic TO-8-12 package also makes the device suitable for legacy industrial, aerospace, and test systems where through-hole packaging and established qualification practices are important.

The primary design consideration is stability at the selected closed-loop gain. Because the AD842 is stable at gains of 2 or greater, circuits should preserve that gain condition and account for parasitic capacitance, board routing, load capacitance, and power-supply decoupling. Short feedback paths, a compact ground return, and locally placed bypass capacitors help control high-speed feedback loops and reduce ringing.

This page organizes the manufacturer's electrical characteristics, package information, practical application guidance, and same-package upgrade options into a design-focused reference. It also identifies where detailed operating conditions or alternative-device data require direct review of the AD842 datasheet before production release.

Alternativas directas para AD842KH — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con AD842KH (mismo factor de forma y huella) — difiere en Gain-Bandwidth Product, Package, Product Type, Supply Voltage Range.

Analog Devices
Gain-Bandwidth Product: 80 MHz
Package: 14-pin PDIP
Product Type: Single wideband precision operational amplifier
Comparar con AD842KH →
Analog Devices
Gain-Bandwidth Product: 80 MHz
Product Type: Wideband operational amplifier
Supply Voltage Range: ±5 V to ±18 V
Comparar con AD842KH →

AD842KHZ

✅ Sustitución directa
📦 TO-8-12
Same 80 MHz gain-bandwidth product and 375 V/µs slew rate; core electrical difference is 0% for the specified headline ratings

📋 Alternativa de referencia (no en el catálogo)

AD842KQ

✅ Sustitución directa
📦 TO-8-12
Same 80 MHz gain-bandwidth product and 375 V/µs slew rate; core electrical difference is 0% for the specified headline ratings

📋 Alternativa de referencia (no en el catálogo)

AD842KN

✅ Sustitución directa
Analog Devices
📦 TO-8-12
Wideband operational amplifier · Current-feedback amplifier · Junction-isolated complementary bipolar (CB) process · 1 amplifier · 80 MHz · ±5 V to ±18 V · 14-pin PDIP · 0.300 inch (7.62 mm) body width

Consulte el precio

Ver hoja de datos →

AD842JH

✅ Sustitución directa
📦 TO-8-12
Same 80 MHz gain-bandwidth product and 375 V/µs slew rate; core electrical difference is 0% for the specified headline ratings

📋 Alternativa de referencia (no en el catálogo)

AD842JN

✅ Sustitución directa
Analog Devices
📦 TO-8-12
Single wideband precision operational amplifier · 80 MHz · 2 · +/-5 V to +/-18 V · 100 mA

Consulte el precio

Ver hoja de datos →

AD842JR

✅ Sustitución directa
📦 TO-8-12
Same 80 MHz gain-bandwidth product and 375 V/µs slew rate; core electrical difference is 0% for the specified headline ratings

📋 Alternativa de referencia (no en el catálogo)

AD842KH Valores máximos y características eléctricas

Amplifier Type Single-channel operational amplifier
Gain-Bandwidth Product 80 MHz at gain of 2
Slew Rate 375 V/µs
Settling Time 0.01% settling for a 10 V step
Full-Power Bandwidth 6.0 MHz at 20 V peak-to-peak output
Maximum Input Offset Voltage 1 mV
Offset Voltage Listing Value 1.5 mV
Minimum Stable Gain 2
Input Bias Current 8 µA
Encapsulado TO-8-12
Process Technology Junction-isolated complementary bipolar (CB) process
Number of Channels 1 channel

Guía de configuración de pines de AD842KH to-8-12

Configuración de pines para AD842KH (encapsulado to-8-12). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado to-8-12 para AD842KH

No hay datos detallados de patillaje disponibles para AD842KH.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD842KH es adecuado para 6 aplicacións: Data-Acquisition Front Ends, Video and Imaging Signal Chains, Waveform Generation, Precision Instrumentation, Active Analog Filters, Legacy Industrial Equipment.

📈

Data-Acquisition Front Ends

The AD842KH fits precision data-acquisition front ends that need to condition sensor or instrumentation signals before sampling. Its 80 MHz gain-bandwidth product at a gain of 2 provides useful bandwidth, while fast settling to within 0.01% after a 10 V step reduces recovery error before the next conversion. The device should be used at a closed-loop gain of 2 or greater and configured with short, well-controlled feedback paths. Engineers should also evaluate input offset drift, noise, supply range, and output drive against the acquisition accuracy and bandwidth requirements.

📺

Video and Imaging Signal Chains

The AD842KH is appropriate for legacy video and imaging boards requiring wideband voltage amplification without changing the established through-hole architecture. Its 80 MHz gain-bandwidth product supports high-frequency signal paths, and the 375 V/µs slew rate helps reproduce rapid transitions without excessive rise-time distortion. A full-power bandwidth of 6.0 MHz is specified at a 20 V peak-to-peak output, so the operating amplitude must be considered when evaluating large-signal performance. Output loading, cable capacitance, and the selected gain should be validated in the finished circuit.

📡

Waveform Generation

The AD842KH is useful in high-speed waveform-generation and active-driver circuits where slew rate and settling influence signal fidelity. Its 375 V/µs slew rate supports rapid output transitions, while the 0.01% settling specification for a 10 V step helps the amplifier return accurately to its intended level. Designers should preserve stable operation at gains of 2 or greater and verify output-current capability against the load. Supply bypassing, grounding, and feedback-loop geometry become especially important when large voltage steps are expected.

🔧

Precision Instrumentation

The AD842KH can serve as the amplification stage in precision instrumentation that combines dc accuracy with wideband response. Its maximum input offset voltage is listed as 1 mV, and the junction-isolated complementary bipolar process provides the intended combination of dc precision and ac performance. For instrumentation, engineers should pair that headline offset specification with the exact input-offset-drift and noise limits in the manufacturer datasheet. Stable gains of 2 or greater, short feedback paths, and a low-impedance ground connection will support predictable operation.

⚡

Active Analog Filters

The AD842KH is applicable to active analog-filter implementations requiring an amplifier that can operate at gain of 2 or greater with substantial bandwidth. Its 80 MHz gain-bandwidth product at gain of 2 gives the circuit designer access to wideband closed-loop response, and the 375 V/µs slew rate supports larger-amplitude signals. Filter performance can still be affected by resistor tolerances, parasitic capacitance, output loading, and power-supply noise. The component's 1 mV maximum input offset voltage also matters for filters designed around low-frequency precision.

🏭

Legacy Industrial Equipment

The AD842KH is a practical choice for legacy industrial equipment that retains TO-8-12 through-hole amplifier positions and requires a modern family member with proven wideband performance. The 80 MHz gain-bandwidth product, 375 V/µs slew rate, and fast 0.01% settling characteristic support instrumentation and control-adjacent signal paths without a board-format redesign. Migration decisions should confirm operating-temperature requirements, supply voltage, output-current demand, and the exact suffix-specific qualification. Component selection alone is not enough; thermal environment and production-test requirements must also be reviewed.

Resumen de productos recomendados

AD842JH Same-family wideband amplifier option Se usa en: Data-Acquisition Front Ends, Waveform Generation, Active Analog Filters AD842JN Analog Devices Se usa en: Data-Acquisition Front Ends, Waveform Generation, Active Analog Filters AD842JR Same-family wideband amplifier option Se usa en: Data-Acquisition Front Ends, Waveform Generation, Active Analog Filters AD842KQ Same-package AD842 family option Se usa en: Video and Imaging Signal Chains, Precision Instrumentation, Legacy Industrial Equipment AD842KHZ Same-package AD842 family option Se usa en: Video and Imaging Signal Chains, Precision Instrumentation, Legacy Industrial Equipment AD842KN Analog Devices Se usa en: Video and Imaging Signal Chains, Precision Instrumentation, Legacy Industrial Equipment
What is the AD842KH?
The AD842KH is a single-channel, wideband, high-output-current operational amplifier manufactured by Analog Devices. According to the manufacturer datasheet, it provides an 80 MHz gain-bandwidth product at a gain of 2, a 375 V/µs slew rate, and fast settling to 0.01% for a 10 V step. The device is packaged in a TO-8-12 hermetic-style package for legacy through-hole applications.
What are the key specifications of AD842KH that engineers should know?
The AD842KH combines an 80 MHz gain-bandwidth product, 375 V/µs slew rate, and 1 mV maximum input offset voltage. According to the Analog Devices datasheet, it is stable at gains of 2 or greater, settles to within 0.01% after a 10 V step, and supports a 6.0 MHz full-power bandwidth at 20 V peak-to-peak output. It is a single-channel device using a junction-isolated complementary bipolar process.
Where can I download the AD842KH datasheet PDF?
The official AD842KH datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD842.pdf. The document is the appropriate source for the exact pin configuration, supply-voltage limits, electrical characteristics, package dimensions, and ordering information because the AD842KH suffix identifies a specific qualification and package variant within the AD842 family.
Where can I find the AD842KH pinout?
The AD842KH pinout is identified in the pin-configuration section of the official Analog Devices AD842 datasheet. Use that diagram when assigning the TO-8-12 connections and when verifying PCB hole locations, because package drawings and lead numbering are essential for a correct through-hole layout. The public result excerpts do not reproduce every terminal name, so use the manufacturer drawing directly for board construction.
How fast does the AD842KH settle after a 10 V step?
The AD842KH settles to within 0.01% for a 10 V step. According to the manufacturer datasheet, this fast-settling behavior complements its 375 V/µs slew rate and 80 MHz gain-bandwidth product at gain of 2. These characteristics make the amplifier relevant to waveform generation, data-acquisition systems, and instrumentation where accurate settling affects subsequent sampling or measurement accuracy.
Is the AD842KH suitable for high-speed video signal chains?
The AD842KH is suitable for many high-speed video and imaging signal-chain stages because its 80 MHz gain-bandwidth product supports wideband amplification and its 375 V/µs slew rate supports rapid signal transitions. The 6.0 MHz full-power bandwidth applies at a 20 V peak-to-peak output. Designers should still verify output-current limits, noise, distortion, and load stability for the exact source and termination.
Where can I buy AD842KH online?
The AD842KH can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current unit availability, volume pricing, lead time, and sourcing support. Current commercial terms can change by quantity and packaging, so submit the required quantity, target date, and delivery location with the request.
What is the price of AD842KH?
Current AD842KH commercial pricing is not stated on this page and should be obtained through the Request a Quote form. Quote requests should specify the required quantity, package variant, date code requirements, and shipment destination. This approach keeps the commercial response aligned with current inventory and purchasing conditions without presenting a stale unit figure.
What is the lead time for AD842KH?
The current AD842KH lead time depends on supplier inventory, order quantity, and any date-code or qualification requirements. Use the Request a Quote form on this page to state the required quantity and target delivery date. Because availability for this mature operational amplifier can fluctuate by lot, a project schedule should rely on the supplier's confirmed lead time rather than a generic estimate.
Is AD842KH in stock?
AD842KH stock status should be confirmed through the Request a Quote form on this page. The form can return current availability for the requested quantity and delivery location. For production planning, also state whether a specific date code, inspection level, or traceability requirement applies so that the confirmed supply reflects the actual procurement constraint.
What can replace AD842KH?
The closest same-package replacements to consider are the AD842 family variants identified in the manufacturer documentation, including AD842JH, AD842JN, AD842JR, AD842KQ, and AD842KN. Their qualification, temperature grade, and assembly details can differ even when the core wideband amplifier ratings remain comparable. Verify the exact ordering code, pinout, electrical limits, and required qualification before substitution.
What is the best Analog Devices equivalent for AD842KH?
The best same-family equivalent depends on the required qualification and environmental grade rather than bandwidth alone. AD842KH, AD842KQ, and AD842KHZ appear within the same Analog Devices ordering family, while AD842JH, AD842JN, and AD842JR use other grade or package identifiers. Compare the manufacturer ordering guide for operating-temperature range, package material, and qualification requirements before selecting one.
AD842KH vs AD842JR - which is better for legacy industrial equipment?
AD842KH is preferable when the legacy equipment requires the KH qualification or package configuration, while AD842JR is a candidate when its documented temperature grade and thermal characteristics match the installation. Both are AD842-family wideband amplifiers, but suffix-specific characteristics must be checked in the manufacturer datasheet. The choice should follow the original equipment specification rather than bandwidth alone.
AD842KH vs AD842KQ - which should I select?
AD842KH and AD842KQ share the core AD842 amplifier family and offer comparable headline bandwidth and slew-rate performance, but their ordering suffixes identify different grade requirements. Choose AD842KQ only when the equipment specification requires that grade, and choose AD842KH when the KH configuration satisfies the environmental and procurement requirements. Confirm the exact suffix-specific temperature and qualification limits in the manufacturer ordering guide.
When should I choose AD842KH over another wideband operational amplifier?
Choose AD842KH when a legacy through-hole design needs an 80 MHz gain-bandwidth amplifier, 375 V/µs slew rate, 0.01% settling after a 10 V step, and the specified TO-8-12 package. It is particularly appropriate for maintaining an existing TO-8-based design rather than redesigning around a surface-mount amplifier. Confirm supply voltage, output current, load stability, and qualification limits before release.
Can AD842KH be used in data-acquisition and instrumentation systems?
Yes, the AD842KH can be used in data-acquisition and instrumentation systems that need wideband gain and rapid settling. Its 80 MHz gain-bandwidth product supports bandwidth, while settling to 0.01% for a 10 V step helps limit error before a subsequent conversion or measurement. The amplifier must remain stable at a closed-loop gain of 2 or greater, and sensitive systems should also evaluate offset drift and input noise.

Datos de referencia de ingeniería para AD842KH — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose AD842KH when an existing through-hole design requires the AD842 family's 80 MHz gain-bandwidth product at gain of 2, 375 V/µs slew rate, and specified 0.01% settling after a 10 V step, and the KH ordering grade satisfies the equipment requirements. AD842KHZ is relevant when its ordering configuration matches the required sourcing or assembly condition; AD842KQ and AD842KN should be considered only when their specific grade and qualification requirements fit the installation. AD842JH and AD842JN offer alternative family configurations, while AD842JR may differ in thermal characteristics because of its package construction. Confirm supply voltage, operating temperature, output current, noise, offset drift, and exact pinout in the manufacturer datasheet before approving any substitution.

Comparación con alternativas

Parámetro Este producto AD842KHZ AD842KQ AD842KN AD842JH AD842JN AD842JR
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package TO-8-12 TO-8-12 TO-8-12 TO-8-12 TO-8-12 TO-8-12 TO-8-12
Gain-Bandwidth Product 80 MHz at gain of 2 80 MHz at gain of 2 80 MHz at gain of 2 80 MHz at gain of 2 80 MHz at gain of 2 80 MHz at gain of 2 80 MHz at gain of 2
Slew Rate 375 V/µs 375 V/µs 375 V/µs 375 V/µs 375 V/µs 375 V/µs 375 V/µs
Settling 0.01% for a 10 V step 0.01% for a 10 V step 0.01% for a 10 V step 0.01% for a 10 V step 0.01% for a 10 V step 0.01% for a 10 V step 0.01% for a 10 V step
Full-Power Bandwidth 6.0 MHz at 20 V peak-to-peak output 6.0 MHz at 20 V peak-to-peak output 6.0 MHz at 20 V peak-to-peak output 6.0 MHz at 20 V peak-to-peak output 6.0 MHz at 20 V peak-to-peak output 6.0 MHz at 20 V peak-to-peak output 6.0 MHz at 20 V peak-to-peak output
Maximum Input Offset Voltage 1 mV 1 mV 1 mV 1 mV 1 mV 1 mV 1 mV
Minimum Stable Gain 2 2 2 2 2 2 2
Input Bias Current 8 µA 8 µA 8 µA 8 µA 8 µA 8 µA 8 µA

Diferenciadores clave

  • Wideband performance with rapid settling (frente a AD842JR)
  • High-output-current drive capability (frente a AD842JH)
  • Legacy-compatible TO-8-12 footprint (frente a AD842JN)

Notas de diseño

Use a closed-loop gain of 2 or greater because the AD842 is specified as stable at gains of 2 or above. Using it at unity gain can produce instability that may appear as oscillation, ringing, or an unexpected settling response. Check the final circuit at the intended load capacitance and account for parasitic capacitance introduced by PCB traces, sockets, cables, and the external feedback network.

Route input, output, and feedback connections as short as practical, especially the feedback path from the output to the inverting input. A high-speed amplifier can form an unintended feedback loop when long traces couple output voltage back into the input node. Use a compact ground-return path, place power-bypass capacitors close to the device, and compare layout changes against settling and ringing measurements before production release.

Estimated: the amplifier's dissipation depends on the actual supply voltage, output voltage, quiescent current, and output current, none of which can be fully confirmed from the public result excerpts. Before deployment, calculate P = (VIN - VOUT) × IOUT + VIN × IQ using the circuit's worst-case operating values, then compare the result with the package and ambient-temperature limits in the manufacturer datasheet.

Validate the circuit with a 10 V step because the manufacturer specifies settling to within 0.01% under that condition. Probe the output at the load rather than only at the amplifier pin, use a bandwidth and loading appropriate for the measurement, and check for ringing or charge injection in switches and protection networks. Changes in source impedance, cable length, or load capacitance can alter settling even when the nominal amplifier specifications are unchanged.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance attributes are not stated in the public manufacturer or distributor result excerpts. Use the current Analog Devices product documentation and declaration of conformity for the exact ordering code.

Datos verificados el: 2026-11-14 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD842KH datasheet AD842KH pinout AD842KH datasheet pdf AD842KH specifications AD842KH equivalent AD842KH replacement AD842KH cross reference AD842KH vs AD842JR AD842KH TO-8-12 amplifier AD842KH 80MHz op amp Analog Devices AD842KH AD842KH application circuit AD842KH price AD842KH stock AD842KH schematic

Componentes & términos relacionados

Analog Devices AD842KH AD842KHZ AD842KQ AD842KN AD842JH AD842JN AD842JR operational amplifier wideband amplifier analog signal conditioning junction-isolated complementary bipolar process gain-bandwidth product slew rate settling time full-power bandwidth input offset voltage TO-8-12 TO-8 package family through-hole package surface-mount alternative data acquisition video signal chain precision instrumentation active analog filter
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ