ADF4360-6BCP - 1.25 GHz Integer-N PLL Synthesizer | Analog Devices
N.º de pieza: ADF4360-6BCP ✗ Fin de vidaADF4360-6BCP Descripción general
An integer-N PLL synthesizer is a clock-and-timing IC that generates a stable, programmable RF output from a reference frequency. Its hierarchy includes frequency synthesizer, phase-locked loop, clock generator, and timing IC. Integrating the synthesizer, VCO, programmable dividers, reference divider, and RF output circuitry into one package simplifies RF signal-source and transceiver designs while reducing external components.
Key features include a 65 MHz to 400 MHz RF output range identified for the device, a 10 MHz to 250 MHz reference-input range, 3.6 V analog supply operation, and 1.8 V logic compatibility. The three-wire serial interface provides digital programming, while digital lock detect, programmable output power, and hardware and software power-down functions support controlled system operation.
The ADF4360-6 architecture allows the synthesized RF output to be programmed through its serial interface. Its integer-N feedback divider and internal reference divider establish the synthesis ratio, while the integrated VCO provides the oscillator source. The divide-by-2 path broadens the lower-frequency use cases, and the exposed thermal pad provides the primary thermal and electrical connection to the PCB.
Typical applications include RF signal generation, wireless communication transceivers, test and measurement equipment, industrial RF systems, and instrumentation requiring programmable RF outputs. The combination of a 1.25 GHz maximum RF output, digital programming, and integrated VCO supports compact RF subsystems where an external oscillator and discrete PLL would otherwise require additional board area.
Design the supply, reference, loop-filter, and RF-output networks in accordance with the manufacturer’s application guidance. Place input and output bypass capacitors close to their associated pins, use a continuous ground plane, and connect the exposed pad to a low-impedance thermal and ground region. Verify lock, output power, spur performance, and phase noise in the final reference and loop-filter implementation.
This product resource combines device specifications, functional use cases, design guidance, and documented drop-in alternatives to support component selection and PCB implementation more efficiently than a basic manufacturer datasheet listing.
Alternativas directas para ADF4360-6BCP — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
ADF4360-6BCPZ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADF4360-6BCP Especificaciones
| Product Type | Integrated integer-N frequency synthesizer and VCO |
| Maximum RF Output Frequency | 1.25 GHz |
| VCO Center Frequency | 1150 MHz |
| Divide-by-2 RF Output Range | 525 MHz to 625 MHz |
| Stated RF Output Range | 65 MHz to 400 MHz |
| Reference Input Frequency Range | 10 MHz to 250 MHz |
| Analog Power Supply Voltage | 3.6 V |
| Logic Compatibility Voltage | 1.8 V |
| Synthesizer Architecture | Integer-N |
| Programming Interface | 3-wire serial interface |
| Output Power Control | Programmable |
| Lock Detection | Digital lock detect |
| Power-Down Modes | Hardware and software power-down |
| Encapsulado | 24-lead WFQFN exposed pad, 4 mm x 4 mm |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de ADF4360-6BCP 24-lead wfqfn exposed pad, 4 mm x 4 mm
Configuración de pines para ADF4360-6BCP (encapsulado 24-lead wfqfn exposed pad, 4 mm x 4 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para ADF4360-6BCP.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ADF4360-6BCP es adecuado para 6 aplicacións: Programmable RF Signal Source, Wireless Communication Transceiver, RF Test and Measurement Instrument, Industrial RF Control System, Instrumentation and RF Sensor Interface, Frequency-Hopping RF Subsystem.
Programmable RF Signal Source
The ADF4360-6BCP fits a programmable RF signal source because it combines an integer-N synthesizer, VCO, and 3-wire control interface in one 24-lead WFQFN package. Its 1.25 GHz maximum RF output and 1150 MHz VCO center frequency support RF test systems operating in the associated planning bands. The digital lock-detect feature lets the controller verify synthesis status, while programmable output power supports controlled drive into downstream RF stages.
Recomendado
Wireless Communication Transceiver
The ADF4360-6BCP can generate the programmable local oscillator used by wireless communication transceivers. Integer-N operation, a reference-input range of 10 MHz to 250 MHz, and digital register control make the device suitable for channel-oriented RF designs. The integrated VCO reduces external RF oscillator content, while the divide-by-2 path supports 525 MHz to 625 MHz outputs when that band matches the transmitter or receiver architecture.
Recomendado
RF Test and Measurement Instrument
The ADF4360-6BCP is useful in RF test and measurement instruments requiring a compact programmable RF source. The serial interface supports automated frequency and configuration changes, and digital lock detect can participate in instrument sequencing. With a 3.6 V supply and 1.8 V-compatible logic, it can interface with modern control hardware, although loop-filter design and phase-noise verification remain essential for metrology-grade performance.
Recomendado
Industrial RF Control System
The ADF4360-6BCP can serve as the RF clock source in an industrial RF control system where local oscillators must be adjusted under software control. Its hardware and software power-down functions help conserve power when an RF section is inactive, while programmable output power permits controlled drive levels. The 24-lead WFQFN exposed-pad package supports compact placement, provided the thermal pad is tied to a low-impedance ground region and the analog supply is properly decoupled.
Recomendado
Instrumentation and RF Sensor Interface
The ADF4360-6BCP is appropriate for instrumentation and RF sensor interfaces that require a stable, programmable excitation or conversion reference. Digital programming permits the host controller to change synthesis settings, and lock detect provides a usable status signal for sequencing measurements. The design must account for reference purity, loop bandwidth, output-buffer isolation, and filtering because synthesizer configuration alone does not determine the final measurement accuracy.
Recomendado
Frequency-Hopping RF Subsystem
The ADF4360-6BCP supports frequency-hopping RF subsystems when the required channels fall within the device’s supported planning ranges. Integer-N register programming enables rapid setup of the synthesis ratio, and the integrated VCO simplifies the RF channel architecture. Engineers should evaluate lock time and phase noise against the hopping interval and mask requirements. The external loop-filter components, reference source, and output network must be tuned for the intended channel spacing.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADF4360-6BCP — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADF4360-6BCPZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 24-WFQFN exposed pad, 4 mm x 4 mm | 24-WFQFN exposed pad, 4 mm x 4 mm |
| Maximum RF Output Frequency | 1.25 GHz | 1.25 GHz |
| VCO Center Frequency | 1150 MHz | 1150 MHz |
| Divide-by-2 Output Range | 525 MHz to 625 MHz | 525 MHz to 625 MHz |
| Analog Supply Voltage | 3.6 V | 3.6 V |
| Logic Compatibility | 1.8 V | 1.8 V |
| Reference Input Range | 10 MHz to 250 MHz | 10 MHz to 250 MHz |
| Programming Interface | 3-wire serial interface | 3-wire serial interface |
| Lock Detection | Digital lock detect | Digital lock detect |
Diferenciadores clave
- Direct family-compatible sourcing path (frente a ADF4360-6BCPZ)
- Integrated VCO reduces external RF oscillator content (frente a ADF4360-6BCPZ)
- Dedicated low-frequency divide-by-2 path (frente a ADF4360-6BCPZ)
Notas de diseño
Place the reference-input, analog-supply, and ground connections according to the manufacturer’s reference layout. Keep the exposed pad connected to a continuous low-impedance ground plane with multiple thermal-via connections, and position input and output bypass capacitors close to their relevant pins. This reduces supply disturbance, reference coupling, and parasitic inductance in the high-frequency VCO and synthesizer core.
Separate the RF output path from sensitive reference and digital return paths, and use a controlled-impedance layout for RF traces. Keep the loop-filter components close to their associated device pins and route them away from the RF output and supply nodes. The 1150 MHz VCO center frequency makes short return paths and stable decoupling essential even though the synthesizer and VCO are integrated.
Confirm the complete frequency plan before selecting the reference crystal, reference divider, RF divider, and loop-filter values. A reference within the 10 MHz to 250 MHz input range is not sufficient by itself; the integer-N ratio and resulting VCO frequency must remain valid. Also account for power-down sequencing and digital lock-detect timing in firmware rather than treating lock indication as immediate end-to-end RF readiness.
Información de cumplimiento
Compliance details are not stated for this exact MPN. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Analog Devices before procurement.