Analog Devices

ADF4360-6BCP - 1.25 GHz Integer-N PLL Synthesizer | Analog Devices

Référence : ADF4360-6BCP ✗ Fin de vie
3.6 V Vdss 24-lead WFQFN exposed pad, 4 mm x 4 mm Package 1.25 GHz Speed
MOQ : 1 |

ADF4360-6BCP Présentation

The Analog Devices ADF4360-6BCP is a fully integrated integer-N frequency synthesizer with a voltage-controlled oscillator, a 1.25 GHz upper RF-output range, and a 3.6 V power supply in a 24-lead WFQFN exposed-pad package. The device is designed around a 1150 MHz VCO center frequency and also offers a divide-by-2 output covering 525 MHz to 625 MHz.

An integer-N PLL synthesizer is a clock-and-timing IC that generates a stable, programmable RF output from a reference frequency. Its hierarchy includes frequency synthesizer, phase-locked loop, clock generator, and timing IC. Integrating the synthesizer, VCO, programmable dividers, reference divider, and RF output circuitry into one package simplifies RF signal-source and transceiver designs while reducing external components.

Key features include a 65 MHz to 400 MHz RF output range identified for the device, a 10 MHz to 250 MHz reference-input range, 3.6 V analog supply operation, and 1.8 V logic compatibility. The three-wire serial interface provides digital programming, while digital lock detect, programmable output power, and hardware and software power-down functions support controlled system operation.

The ADF4360-6 architecture allows the synthesized RF output to be programmed through its serial interface. Its integer-N feedback divider and internal reference divider establish the synthesis ratio, while the integrated VCO provides the oscillator source. The divide-by-2 path broadens the lower-frequency use cases, and the exposed thermal pad provides the primary thermal and electrical connection to the PCB.

Typical applications include RF signal generation, wireless communication transceivers, test and measurement equipment, industrial RF systems, and instrumentation requiring programmable RF outputs. The combination of a 1.25 GHz maximum RF output, digital programming, and integrated VCO supports compact RF subsystems where an external oscillator and discrete PLL would otherwise require additional board area.

Design the supply, reference, loop-filter, and RF-output networks in accordance with the manufacturer’s application guidance. Place input and output bypass capacitors close to their associated pins, use a continuous ground plane, and connect the exposed pad to a low-impedance thermal and ground region. Verify lock, output power, spur performance, and phase noise in the final reference and loop-filter implementation.

This product resource combines device specifications, functional use cases, design guidance, and documented drop-in alternatives to support component selection and PCB implementation more efficiently than a basic manufacturer datasheet listing.

Alternatives de remplacement direct pour ADF4360-6BCP — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

ADF4360-6BCPZ

✅ Remplacement direct
📦 24-WFQFN exposed pad, 4 mm x 4 mm
Same ADF4360-6 function and 24-WFQFN exposed-pad package; ordering-suffix finish or grade details require confirmation

📋 Alternative de référence (hors catalogue)

ADF4360-6BCP Spécifications

Product Type Integrated integer-N frequency synthesizer and VCO
Maximum RF Output Frequency 1.25 GHz
VCO Center Frequency 1150 MHz
Divide-by-2 RF Output Range 525 MHz to 625 MHz
Stated RF Output Range 65 MHz to 400 MHz
Reference Input Frequency Range 10 MHz to 250 MHz
Analog Power Supply Voltage 3.6 V
Logic Compatibility Voltage 1.8 V
Synthesizer Architecture Integer-N
Programming Interface 3-wire serial interface
Output Power Control Programmable
Lock Detection Digital lock detect
Power-Down Modes Hardware and software power-down
Boîtier 24-lead WFQFN exposed pad, 4 mm x 4 mm
Type de montage Surface mount

Guide de configuration des broches du ADF4360-6BCP 24-lead wfqfn exposed pad, 4 mm x 4 mm

Configuration des broches du ADF4360-6BCP (boîtier 24-lead wfqfn exposed pad, 4 mm x 4 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 24-lead wfqfn exposed pad, 4 mm x 4 mm pour le ADF4360-6BCP

Aucune donnée de brochage détaillée disponible pour ADF4360-6BCP.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADF4360-6BCP convient pour 6 applications: Programmable RF Signal Source, Wireless Communication Transceiver, RF Test and Measurement Instrument, Industrial RF Control System, Instrumentation and RF Sensor Interface, Frequency-Hopping RF Subsystem.

📡

Programmable RF Signal Source

The ADF4360-6BCP fits a programmable RF signal source because it combines an integer-N synthesizer, VCO, and 3-wire control interface in one 24-lead WFQFN package. Its 1.25 GHz maximum RF output and 1150 MHz VCO center frequency support RF test systems operating in the associated planning bands. The digital lock-detect feature lets the controller verify synthesis status, while programmable output power supports controlled drive into downstream RF stages.

🌐

Wireless Communication Transceiver

The ADF4360-6BCP can generate the programmable local oscillator used by wireless communication transceivers. Integer-N operation, a reference-input range of 10 MHz to 250 MHz, and digital register control make the device suitable for channel-oriented RF designs. The integrated VCO reduces external RF oscillator content, while the divide-by-2 path supports 525 MHz to 625 MHz outputs when that band matches the transmitter or receiver architecture.

🖥️

RF Test and Measurement Instrument

The ADF4360-6BCP is useful in RF test and measurement instruments requiring a compact programmable RF source. The serial interface supports automated frequency and configuration changes, and digital lock detect can participate in instrument sequencing. With a 3.6 V supply and 1.8 V-compatible logic, it can interface with modern control hardware, although loop-filter design and phase-noise verification remain essential for metrology-grade performance.

🏭

Industrial RF Control System

The ADF4360-6BCP can serve as the RF clock source in an industrial RF control system where local oscillators must be adjusted under software control. Its hardware and software power-down functions help conserve power when an RF section is inactive, while programmable output power permits controlled drive levels. The 24-lead WFQFN exposed-pad package supports compact placement, provided the thermal pad is tied to a low-impedance ground region and the analog supply is properly decoupled.

🔧

Instrumentation and RF Sensor Interface

The ADF4360-6BCP is appropriate for instrumentation and RF sensor interfaces that require a stable, programmable excitation or conversion reference. Digital programming permits the host controller to change synthesis settings, and lock detect provides a usable status signal for sequencing measurements. The design must account for reference purity, loop bandwidth, output-buffer isolation, and filtering because synthesizer configuration alone does not determine the final measurement accuracy.

📶

Frequency-Hopping RF Subsystem

The ADF4360-6BCP supports frequency-hopping RF subsystems when the required channels fall within the device’s supported planning ranges. Integer-N register programming enables rapid setup of the synthesis ratio, and the integrated VCO simplifies the RF channel architecture. Engineers should evaluate lock time and phase noise against the hopping interval and mask requirements. The external loop-filter components, reference source, and output network must be tuned for the intended channel spacing.

Récapitulatif des produits recommandés

ADF4360-6 Integrated synthesizer and VCO family Utilisé dans : Programmable RF Signal Source, Wireless Communication Transceiver, RF Test and Measurement Instrument, Industrial RF Control System, Instrumentation and RF Sensor Interface, Frequency-Hopping RF Subsystem
What is the ADF4360-6BCP?
The ADF4360-6BCP is a fully integrated integer-N frequency synthesizer with a voltage-controlled oscillator for programmable RF generation. According to the Analog Devices ADF4360-6 datasheet, its VCO is designed around a 1150 MHz center frequency, and a divide-by-2 output path covers 525 MHz to 625 MHz. The device uses a 3.6 V supply, supports 1.8 V-compatible logic, and is packaged in a 24-lead WFQFN with an exposed pad.
What output frequency range does the ADF4360-6BCP provide?
The ADF4360-6BCP supports a 1.25 GHz maximum RF output and is designed around a 1150 MHz VCO center frequency. The Analog Devices ADF4360-6 datasheet also identifies a divide-by-2 output from 525 MHz to 625 MHz. Another product summary lists a 65 MHz to 400 MHz output range, so designers should verify the applicable operating region against the manufacturer’s frequency-planning guidance and selected divider configuration.
Where can I download the ADF4360-6BCP datasheet PDF?
The official ADF4360-6 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-6.pdf. It contains the detailed frequency tables, register descriptions, application information, pin descriptions, and recommended circuit details for the ADF4360-6 family. Use the pin-description and register tables in that document when assigning PCB signals and writing firmware.
Where is the pinout for the ADF4360-6BCP?
The ADF4360-6BCP pinout is defined in the pin-description table of the official Analog Devices ADF4360-6 datasheet. The component uses a 24-lead WFQFN exposed-pad package, and the exposed pad is a critical electrical and thermal connection rather than a conventional signal lead. Use the manufacturer package drawing and pin table to map supply, ground, reference, serial-interface, and RF-output connections.
What is the reference input range of the ADF4360-6BCP?
The ADF4360-6BCP accepts a reference input from 10 MHz to 250 MHz. According to the Analog Devices ADF4360-6 datasheet, the reference signal is divided internally and participates in the integer-N synthesis ratio. The permitted reference frequency also depends on the selected divider settings, so the complete frequency plan must confirm the reference ratio before the external crystal, oscillator, and loop-filter values are finalized.
How is the ADF4360-6BCP programmed?
The ADF4360-6BCP is programmed through its 3-wire serial interface. The interface is compatible with 1.8 V logic and provides access to synthesis and configuration registers, allowing the software to set divider values, output behavior, power-down state, and other device functions. The Analog Devices ADF4360-6 datasheet provides the register map and timing requirements that firmware should follow during initialization and updates.
What can replace the ADF4360-6BCP?
The closest documented drop-in replacement is the ADF4360-6BCPZ, which uses the same 24-lead WFQFN exposed-pad format and represents the same ADF4360-6 frequency-synthesizer configuration with a different ordering suffix. Because the datasheet’s pin configuration and electrical function remain tied to the ADF4360-6 family, verify the complete suffix specifications, temperature grade, and lifecycle status against the original design requirements.
Is the ADF4360-6BCP the same as the ADF4360-6BCPZ?
The ADF4360-6BCP and ADF4360-6BCPZ are closely related ordering variants of the same Analog Devices ADF4360-6 device family. Both are identified with a 24-lead WFQFN exposed-pad package and the same 1.25 GHz-class integrated synthesizer function. The ordering suffixes can differ in lead finish or qualification details, so use the manufacturer ordering table rather than treating the suffix change as proof that every grade-specific characteristic is identical.
ADF4360-6BCP vs ADF4360-7BCPZ: which is better for an RF design?
The ADF4360-6BCP is the better choice when the design centers on approximately 1150 MHz and can use its 525 MHz to 625 MHz divide-by-2 range, whereas the ADF4360-7BCPZ covers a much broader 350 MHz to 1800 MHz range with a 175 MHz to 900 MHz divide-by-2 output. These frequency ranges are not drop-in-equivalent. Select by required output band, external inductance configuration, and reference-divider plan.
When should I choose the ADF4360-6BCP over a different synthesizer family?
Choose the ADF4360-6BCP when the design needs an integrated integer-N PLL and VCO, a 1.25 GHz-class RF output, digital programming, and compact 24-lead WFQFN integration. It is less suitable if the required band lies outside the device’s planning ranges or if a fractional-N architecture is required to meet phase-noise or channel-hopping targets without recalibration. Confirm the exact output band before layout begins.
Is the ADF4360-6BCP suitable for programmable RF test equipment?
The ADF4360-6BCP is suitable for programmable RF test equipment when the desired operating band falls within its supported planning ranges. Its 3-wire interface permits software control, digital lock detect supports system-state monitoring, and the integrated VCO reduces the component count of a signal source. A lock detector alone does not guarantee phase-noise compliance, so evaluate the reference, loop filter, output power, and spur requirements at system level.
What are the key specifications engineers should know about the ADF4360-6BCP?
The key specifications are a 1.25 GHz maximum RF output, a 1150 MHz VCO center frequency, a 3.6 V power supply, 1.8 V-compatible logic, and a 10 MHz to 250 MHz reference-input range. The Analog Devices ADF4360-6 datasheet also identifies integer-N operation, a 3-wire serial programming interface, programmable output power, digital lock detect, and hardware and software power-down functions.
Does the ADF4360-6BCP require an external VCO?
No, the ADF4360-6BCP contains both the frequency synthesizer and voltage-controlled oscillator. This integration eliminates the external VCO required by some discrete PLL designs, although external inductors and a loop filter remain part of the application circuit. According to the Analog Devices ADF4360-6 datasheet, the VCO is designed around a 1150 MHz center frequency with a divide-by-2 output option.
Where can I buy the ADF4360-6BCP and check current lead time?
Use the Request a Quote form on this page to ask for the ADF4360-6BCP, current availability, lead time, and minimum order quantity. The component is identified as obsolete in lifecycle information, so supply status should be confirmed for the exact suffix before committing a new production design. Do not assume that an obsolete device can be supported by a standard distribution schedule.
What is the price of the ADF4360-6BCP?
Use the Request a Quote form on this page for current ADF4360-6BCP pricing and supply conditions. The device is identified as obsolete, and no explicit quantity-break price for this exact MPN is published in the available product information. Quote requests should include your required quantity, date code, target package suffix, and production schedule so the response reflects the actual sourcing need.
Is the ADF4360-6BCP currently in stock?
Current stock for the ADF4360-6BCP must be confirmed through the Request a Quote form on this page because lifecycle information identifies the device as obsolete. The exact suffix matters when evaluating availability, especially when comparing the original ADF4360-6BCP with the closely related ADF4360-6BCPZ. Share your required quantity and production schedule when requesting a supply confirmation.

Données de référence d'ingénierie pour ADF4360-6BCP — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the ADF4360-6BCP when an existing RF design uses the ADF4360-6 architecture, requires a 24-lead WFQFN exposed-pad footprint, and operates within the device’s frequency-planning ranges. The ADF4360-6BCPZ is the closest drop-in sourcing alternative because it retains the 1.25 GHz maximum RF output, 1150 MHz VCO center frequency, 3.6 V supply, 1.8 V logic compatibility, and 24-lead package; confirm its suffix-specific grade, finish, temperature, and lifecycle details before substitution. Do not choose the ADF4360-7BCPZ or ADF4360-9BCPZ as direct replacements because their usable frequency bands and center-frequency configurations differ. For new designs, verify lifecycle, availability, phase noise, lock time, reference requirements, and loop-filter performance before committing the component.

Comparaison avec les alternatives

Paramètre Ce produit ADF4360-6BCPZ
Brand Analog Devices Analog Devices
Package 24-WFQFN exposed pad, 4 mm x 4 mm 24-WFQFN exposed pad, 4 mm x 4 mm
Maximum RF Output Frequency 1.25 GHz 1.25 GHz
VCO Center Frequency 1150 MHz 1150 MHz
Divide-by-2 Output Range 525 MHz to 625 MHz 525 MHz to 625 MHz
Analog Supply Voltage 3.6 V 3.6 V
Logic Compatibility 1.8 V 1.8 V
Reference Input Range 10 MHz to 250 MHz 10 MHz to 250 MHz
Programming Interface 3-wire serial interface 3-wire serial interface
Lock Detection Digital lock detect Digital lock detect

Principaux différenciateurs

  • Direct family-compatible sourcing path (vs ADF4360-6BCPZ)
  • Integrated VCO reduces external RF oscillator content (vs ADF4360-6BCPZ)
  • Dedicated low-frequency divide-by-2 path (vs ADF4360-6BCPZ)

Notes de conception

Place the reference-input, analog-supply, and ground connections according to the manufacturer’s reference layout. Keep the exposed pad connected to a continuous low-impedance ground plane with multiple thermal-via connections, and position input and output bypass capacitors close to their relevant pins. This reduces supply disturbance, reference coupling, and parasitic inductance in the high-frequency VCO and synthesizer core.

Separate the RF output path from sensitive reference and digital return paths, and use a controlled-impedance layout for RF traces. Keep the loop-filter components close to their associated device pins and route them away from the RF output and supply nodes. The 1150 MHz VCO center frequency makes short return paths and stable decoupling essential even though the synthesizer and VCO are integrated.

Confirm the complete frequency plan before selecting the reference crystal, reference divider, RF divider, and loop-filter values. A reference within the 10 MHz to 250 MHz input range is not sufficient by itself; the integer-N ratio and resulting VCO frequency must remain valid. Also account for power-down sequencing and digital lock-detect timing in firmware rather than treating lock indication as immediate end-to-end RF readiness.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance details are not stated for this exact MPN. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Analog Devices before procurement.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-6BCP datasheet ADF4360-6BCP datasheet pdf ADF4360-6BCP pinout ADF4360-6BCP equivalent ADF4360-6BCP replacement ADF4360-6BCP vs ADF4360-6BCPZ ADF4360-6BCP application circuit Analog Devices ADF4360-6BCP ADF4360-6BCP price ADF4360-6BCP stock ADF4360-6BCP 24 WFQFN

Composants & termes associés

Analog Devices ADF4360-6BCP ADF4360-6BCPZ ADF4360-6 ADF4360-7BCPZ integer-N frequency synthesizer phase-locked loop PLL voltage-controlled oscillator VCO clock generator timing IC RF synthesizer 3-wire serial interface digital lock detect programmable output power power-down mode reference input divide-by-2 output 1.25 GHz RF output 1150 MHz VCO center frequency 24-WFQFN exposed-pad package surface-mount package RF signal generation wireless communication
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ