ADF4360-6BCP - 1.25 GHz Integer-N PLL Synthesizer | Analog Devices
料号: ADF4360-6BCP ✗ 停产ADF4360-6BCP 概述
An integer-N PLL synthesizer is a clock-and-timing IC that generates a stable, programmable RF output from a reference frequency. Its hierarchy includes frequency synthesizer, phase-locked loop, clock generator, and timing IC. Integrating the synthesizer, VCO, programmable dividers, reference divider, and RF output circuitry into one package simplifies RF signal-source and transceiver designs while reducing external components.
Key features include a 65 MHz to 400 MHz RF output range identified for the device, a 10 MHz to 250 MHz reference-input range, 3.6 V analog supply operation, and 1.8 V logic compatibility. The three-wire serial interface provides digital programming, while digital lock detect, programmable output power, and hardware and software power-down functions support controlled system operation.
The ADF4360-6 architecture allows the synthesized RF output to be programmed through its serial interface. Its integer-N feedback divider and internal reference divider establish the synthesis ratio, while the integrated VCO provides the oscillator source. The divide-by-2 path broadens the lower-frequency use cases, and the exposed thermal pad provides the primary thermal and electrical connection to the PCB.
Typical applications include RF signal generation, wireless communication transceivers, test and measurement equipment, industrial RF systems, and instrumentation requiring programmable RF outputs. The combination of a 1.25 GHz maximum RF output, digital programming, and integrated VCO supports compact RF subsystems where an external oscillator and discrete PLL would otherwise require additional board area.
Design the supply, reference, loop-filter, and RF-output networks in accordance with the manufacturer’s application guidance. Place input and output bypass capacitors close to their associated pins, use a continuous ground plane, and connect the exposed pad to a low-impedance thermal and ground region. Verify lock, output power, spur performance, and phase noise in the final reference and loop-filter implementation.
This product resource combines device specifications, functional use cases, design guidance, and documented drop-in alternatives to support component selection and PCB implementation more efficiently than a basic manufacturer datasheet listing.
直接替换替代料: ADF4360-6BCP ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
ADF4360-6BCPZ
✅ 直接替换📋 参考替代料(不在目录中)
ADF4360-6BCP 规格参数
| Product Type | Integrated integer-N frequency synthesizer and VCO |
| Maximum RF Output Frequency | 1.25 GHz |
| VCO Center Frequency | 1150 MHz |
| Divide-by-2 RF Output Range | 525 MHz to 625 MHz |
| Stated RF Output Range | 65 MHz to 400 MHz |
| Reference Input Frequency Range | 10 MHz to 250 MHz |
| Analog Power Supply Voltage | 3.6 V |
| Logic Compatibility Voltage | 1.8 V |
| Synthesizer Architecture | Integer-N |
| Programming Interface | 3-wire serial interface |
| Output Power Control | Programmable |
| Lock Detection | Digital lock detect |
| Power-Down Modes | Hardware and software power-down |
| 封装 | 24-lead WFQFN exposed pad, 4 mm x 4 mm |
| 安装类型 | Surface mount |
ADF4360-6BCP 24-lead wfqfn exposed pad, 4 mm x 4 mm 引脚配置指南
ADF4360-6BCP(24-lead wfqfn exposed pad, 4 mm x 4 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADF4360-6BCP.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADF4360-6BCP 适用于 6 应用s: Programmable RF Signal Source, Wireless Communication Transceiver, RF Test and Measurement Instrument, Industrial RF Control System, Instrumentation and RF Sensor Interface, Frequency-Hopping RF Subsystem.
Programmable RF Signal Source
The ADF4360-6BCP fits a programmable RF signal source because it combines an integer-N synthesizer, VCO, and 3-wire control interface in one 24-lead WFQFN package. Its 1.25 GHz maximum RF output and 1150 MHz VCO center frequency support RF test systems operating in the associated planning bands. The digital lock-detect feature lets the controller verify synthesis status, while programmable output power supports controlled drive into downstream RF stages.
推荐
Wireless Communication Transceiver
The ADF4360-6BCP can generate the programmable local oscillator used by wireless communication transceivers. Integer-N operation, a reference-input range of 10 MHz to 250 MHz, and digital register control make the device suitable for channel-oriented RF designs. The integrated VCO reduces external RF oscillator content, while the divide-by-2 path supports 525 MHz to 625 MHz outputs when that band matches the transmitter or receiver architecture.
推荐
RF Test and Measurement Instrument
The ADF4360-6BCP is useful in RF test and measurement instruments requiring a compact programmable RF source. The serial interface supports automated frequency and configuration changes, and digital lock detect can participate in instrument sequencing. With a 3.6 V supply and 1.8 V-compatible logic, it can interface with modern control hardware, although loop-filter design and phase-noise verification remain essential for metrology-grade performance.
推荐
Industrial RF Control System
The ADF4360-6BCP can serve as the RF clock source in an industrial RF control system where local oscillators must be adjusted under software control. Its hardware and software power-down functions help conserve power when an RF section is inactive, while programmable output power permits controlled drive levels. The 24-lead WFQFN exposed-pad package supports compact placement, provided the thermal pad is tied to a low-impedance ground region and the analog supply is properly decoupled.
推荐
Instrumentation and RF Sensor Interface
The ADF4360-6BCP is appropriate for instrumentation and RF sensor interfaces that require a stable, programmable excitation or conversion reference. Digital programming permits the host controller to change synthesis settings, and lock detect provides a usable status signal for sequencing measurements. The design must account for reference purity, loop bandwidth, output-buffer isolation, and filtering because synthesizer configuration alone does not determine the final measurement accuracy.
推荐
Frequency-Hopping RF Subsystem
The ADF4360-6BCP supports frequency-hopping RF subsystems when the required channels fall within the device’s supported planning ranges. Integer-N register programming enables rapid setup of the synthesis ratio, and the integrated VCO simplifies the RF channel architecture. Engineers should evaluate lock time and phase noise against the hopping interval and mask requirements. The external loop-filter components, reference source, and output network must be tuned for the intended channel spacing.
推荐
推荐产品汇总
工程参考数据: ADF4360-6BCP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADF4360-6BCPZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 24-WFQFN exposed pad, 4 mm x 4 mm | 24-WFQFN exposed pad, 4 mm x 4 mm |
| Maximum RF Output Frequency | 1.25 GHz | 1.25 GHz |
| VCO Center Frequency | 1150 MHz | 1150 MHz |
| Divide-by-2 Output Range | 525 MHz to 625 MHz | 525 MHz to 625 MHz |
| Analog Supply Voltage | 3.6 V | 3.6 V |
| Logic Compatibility | 1.8 V | 1.8 V |
| Reference Input Range | 10 MHz to 250 MHz | 10 MHz to 250 MHz |
| Programming Interface | 3-wire serial interface | 3-wire serial interface |
| Lock Detection | Digital lock detect | Digital lock detect |
关键差异点
- Direct family-compatible sourcing path (对比 ADF4360-6BCPZ)
- Integrated VCO reduces external RF oscillator content (对比 ADF4360-6BCPZ)
- Dedicated low-frequency divide-by-2 path (对比 ADF4360-6BCPZ)
设计说明
Place the reference-input, analog-supply, and ground connections according to the manufacturer’s reference layout. Keep the exposed pad connected to a continuous low-impedance ground plane with multiple thermal-via connections, and position input and output bypass capacitors close to their relevant pins. This reduces supply disturbance, reference coupling, and parasitic inductance in the high-frequency VCO and synthesizer core.
Separate the RF output path from sensitive reference and digital return paths, and use a controlled-impedance layout for RF traces. Keep the loop-filter components close to their associated device pins and route them away from the RF output and supply nodes. The 1150 MHz VCO center frequency makes short return paths and stable decoupling essential even though the synthesizer and VCO are integrated.
Confirm the complete frequency plan before selecting the reference crystal, reference divider, RF divider, and loop-filter values. A reference within the 10 MHz to 250 MHz input range is not sufficient by itself; the integer-N ratio and resulting VCO frequency must remain valid. Also account for power-down sequencing and digital lock-detect timing in firmware rather than treating lock indication as immediate end-to-end RF readiness.
合规信息
Compliance details are not stated for this exact MPN. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Analog Devices before procurement.