Texas Instruments

ADS1213E/1K - 22-Bit 4-Channel Delta-Sigma ADC | Texas Instruments

N.º de pieza: ADS1213E/1K ✓ Activo
5 V Vdss 28-pin SSOP (DB) Package
MOQ: 1 |

ADS1213E/1K Descripción general

Texas Instruments ADS1213E/1K is a 22-bit, 6.25-kSPS, four-input delta-sigma analog-to-digital converter with an internal or external reference, programmable gain amplifier, and serial interface in a 28-pin SSOP package. It operates from a single 5 V supply across the industrial temperature range of -40°C to +85°C.

A delta-sigma ADC is a type of analog-to-digital converter that uses a high-resolution internal modulator and digital filtering to convert continuous analog voltages into digital codes. The ADS1213 belongs to the ADC, data-converter IC, and signal-processing semiconductor hierarchies. It is intended for precision measurement systems requiring high resolution, integrated channel multiplexing, and flexible gain control.

Key features include 22-bit nominal resolution, four analog input channels, conversion throughput up to 6.25 kSPS, and a programmable gain amplifier. The device supports internal and external voltage references, which permits either an on-chip reference implementation or a more precise external source. Its serial interface reduces the number of external connections required in multi-channel measurement equipment.

Technically, the converter combines delta-sigma conversion, digital filtering, channel multiplexing, and programmable gain in one integrated circuit. The four-input architecture makes it suitable for bridge, sensor, voltage, and current measurements that require multiple analog channels. Because it is a single-supply device, the converter simplifies system-level power planning when the measured signals remain within the supported analog input range.

Typical applications include industrial pressure and temperature measurement, strain-gauge and bridge excitation systems, laboratory instrumentation, process monitoring, and precision data-acquisition modules. The integrated programmable gain amplifier can reduce the need for external analog conditioning when the source signal lies within a selectable gain range.

A critical layout consideration is that reference, supply, and analog-input traces should be routed away from high-current digital switching paths. Place input and reference capacitors close to their associated pins, use a quiet ground return, and maintain consistent grounding between the converter and the sensor interface. Confirm the absolute and differential input limits before applying bipolar signals.

This page combines manufacturer specifications, package details, engineering guidance, application fit, and verified drop-in information to support component selection and PCB implementation without reproducing the complete manufacturer datasheet.

Alternativas directas para ADS1213E/1K — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con ADS1213E/1K (mismo factor de forma y huella) — difiere en Architecture, Programmable Gain Amplifier, RoHS Status, Supply Voltage.

Texas Instruments
Architecture: Delta-Sigma (sigma-delta)
Programmable Gain Amplifier: 1, 2, 4, 8, 16
RoHS Status: Compliant (G suffix, Pb-free)

ADS1213E/1KG4

✅ Sustitución directa
📦 SSOP-28 (DB)
Ordering suffix differs by 0%; the verified listing retains 22-bit resolution, 6.25-kSPS throughput, four inputs, and a 28-pin SSOP package.

📋 Alternativa de referencia (no en el catálogo)

ADS1213E/1K Valores máximos y características eléctricas

ADC Resolution 22 bit
Conversion Rate 6.25 kSPS
Analog Input Channels 4 channels
Device Channel Configuration 8-channel device
Architecture Delta-sigma
Tensión de alimentación 5 V
Reference Type Internal or external
Programmable Gain Amplifier Integrated PGA
Tipo de interfaz Serial
Encapsulado 28-pin SSOP (DB)
Terminal Form Gull wing
Package Shape Rectangular
Estilo de montaje Surface mount
Temperatura de funcionamiento -40°C to +85°C
Temperature Grade Industrial
Packaging Tape and reel
Estado RoHS Compliant
Lead-Free Status Lead-free

Guía de configuración de pines de ADS1213E/1K rectangular

Configuración de pines para ADS1213E/1K (encapsulado rectangular). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado rectangular para ADS1213E/1K

No hay datos detallados de patillaje disponibles para ADS1213E/1K.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ADS1213E/1K es adecuado para 6 aplicacións: Industrial Pressure Transmitters, Strain-Gauge and Bridge Measurements, Precision Temperature Acquisition, Process-Control Instrumentation, Laboratory and Test Equipment, Data-Acquisition Modules.

🏭

Industrial Pressure Transmitters

ADS1213E/1K fits pressure-transmitter front ends that must digitize several low-level sensor signals accurately. Its 22-bit nominal resolution provides a high-resolution conversion stage, while the four-channel input multiplexer supports shared reference and diagnostic measurements. The 6.25-kSPS maximum rate is appropriate for many industrial pressure systems that favor filtering and stable readings over very high-speed sampling. The integrated PGA can reduce frontend gain requirements, although the selected gain must remain compatible with the bridge or transducer output common-mode range. A single 5 V supply also simplifies transducer-interface power planning. For reliable deployment, protect the inputs from industrial surges, route the sensor returns cleanly, and verify the converter’s settling behavior for the selected digital filter.

⚡

Strain-Gauge and Bridge Measurements

The ADS1213E/1K is well suited to strain-gauge and resistive-bridge instrumentation because it combines four analog inputs, programmable gain, and 22-bit nominal delta-sigma resolution. At up to 6.25 kSPS, it can acquire force, load, or displacement signals while applying the appropriate internal gain. The programmable gain amplifier helps match the converter input range to a small differential bridge output, but common-mode voltage and allowable gain must be checked carefully because both determine usable signal headroom. Supply excitation and analog grounds should be arranged so switching currents do not appear in the bridge return path. Place reference and input bypass components near the device, and use a stable excitation source when system accuracy must be dominated by the mechanical sensor rather than the ADC.

🌡️

Precision Temperature Acquisition

ADS1213E/1K can serve precision temperature-measurement systems using RTDs, thermocouple conditioning, or resistive sensors. Its 22-bit nominal resolution is valuable when the final temperature resolution is limited by sensor accuracy rather than conversion speed, and the 6.25-kSPS rate is more than sufficient for many thermal-loop and laboratory channels. Four inputs allow measurement of active sensors alongside reference or diagnostic channels. The internal or external reference choice lets the design balance simplicity against stability, with an external reference potentially improving tracking performance when supported by the sensor and excitation architecture. Keep thermocouple and RTD wiring away from power converters and motor nodes, use appropriate input filtering, and validate the complete sensor-to-digital path for offset, drift, and settling.

🏭

Process-Control Instrumentation

ADS1213E/1K supports process-control modules that monitor several slow or medium-speed analog variables from sensors, transmitters, or laboratory fixtures. The 6.25-kSPS conversion rate accommodates many closed-loop measurement loops, while the four-channel multiplexer reduces the number of separate converter packages needed. Its integrated PGA and selectable reference architecture help standardize input conditioning across channels. For a process panel, filtering and selectable data rates can suppress 50/60-Hz-related interference when the required settling time permits, but the digital-filter configuration must be checked against update timing. Keep analog routing compact, provide a clean reference return, isolate motor and relay loads from the converter ground, and perform channel-by-channel calibration to account for gain, offset, and sensor variation.

🔧

Laboratory and Test Equipment

ADS1213E/1K is appropriate for laboratory instruments that digitize low-level analog measurements and need high nominal resolution rather than maximum sampling frequency. The four analog inputs can support multiplexed transducer channels, and the programmable gain amplifier allows a single converter to handle signals occupying different amplitude ranges. The 5 V analog supply and 6.25-kSPS maximum throughput simplify synchronization with embedded control hardware. In an instrument, the converter’s internal digital filter can reject noise outside the usable bandwidth, so selecting a slower data rate may improve measurement stability without requiring analog changes. Shield sensitive inputs, use a dedicated analog ground region, separate digital return currents from reference returns, and verify calibration behavior over temperature if measurement accuracy is critical.

🖥️

Data-Acquisition Modules

ADS1213E/1K can form the measurement core of compact data-acquisition modules requiring several channels and consistent high-resolution conversion. Its multiplexed four-input architecture, programmable gain amplifier, and internal or external reference support different sensor types behind a common acquisition interface. At 6.25-kSPS, the converter is appropriate for environmental, vibration-envelope, laboratory, and industrial monitoring channels that do not require megahertz-class sampling. A practical design should preserve the selected reference and analog-input impedance by keeping traces short and placing bypass capacitors at the device. Include calibration words or system-level offset and gain correction where precision matters, and avoid sharing high-current return paths between the reference and sensor circuitry.

What is the ADS1213E/1K?
The ADS1213E/1K is a 22-bit, 6.25-kSPS delta-sigma analog-to-digital converter with four analog input channels, an internal or external reference, and a programmable gain amplifier. According to the Texas Instruments ADS1213 product page, the device is packaged in a 28-pin SSOP and operates from a single 5 V supply. It is intended for precision data-acquisition, industrial sensing, and instrumentation systems where multiple analog inputs must be converted with high nominal resolution.
What is the operating voltage of ADS1213E/1K?
The ADS1213E/1K operates from a single 5 V supply. The Texas Instruments product information identifies the ADS1213 as a 5 V device with internal or external reference support, making it suitable for conventional industrial 5 V signal-chain designs. Before applying the supply, verify the exact absolute maximum and recommended operating limits in the manufacturer datasheet and ensure that the sensor interface cannot drive any analog input outside its specified range.
How many input channels does ADS1213E/1K have?
The ADS1213E/1K provides four analog input channels and is also described by Texas Instruments as an 8-channel delta-sigma ADC with reference and PGA functions. Channel terminology can refer to multiplexed input selection and single-ended or differential pair usage, so engineers should consult the pin-description and analog-input tables before assigning sensor channels. The verified ordering information confirms a 22-bit converter with 4 Input and 28-SSOP construction.
What is the conversion rate of ADS1213E/1K?
The ADS1213E/1K performs conversions at up to 6.25 kSPS. This throughput supports fast enough acquisition for many process-control, bridge-sensor, and laboratory measurement systems while retaining delta-sigma filtering and high nominal resolution. The maximum usable data rate depends on the selected data rate, filter configuration, clock, and serial-interface settings described in the manufacturer datasheet.
Where can I download the ADS1213E/1K datasheet PDF?
The official ADS1213 product page at Texas Instruments provides the manufacturer datasheet, ordering information, parameters, and support resources. Open https://www.ti.com/product/ADS1213 and select the ADS1213E/1K ordering table to reach its document links. The page also identifies the device as a 22-bit, 6.25-kSPS, 8-channel delta-sigma ADC with VREF and PGA in a 28-pin SSOP package.
Where is the ADS1213E/1K pinout?
The ADS1213E/1K pinout is published in the pin-configuration section of the Texas Instruments ADS1213 manufacturer datasheet. The component uses a 28-pin SSOP package with gull-wing terminals, and the ordering information confirms 28 pins. Use the datasheet pin-description table for exact numbering, signal names, analog limits, and exposed thermal or supply assignments rather than inferring connections from a distributor image.
What are the key specifications of ADS1213E/1K that engineers should know?
The key ADS1213E/1K specifications are 22-bit nominal resolution, 6.25-kSPS maximum throughput, four analog input channels, a 5 V single supply, internal or external referencing, an integrated PGA, and a 28-pin SSOP package. According to the Texas Instruments product page, the industrial-temperature device is designed for precision delta-sigma conversion. These parameters place it between general-purpose multiplexed ADCs and dedicated high-performance converters.
Can ADS1213E/1K replace ADS1213E/1KG4?
The ADS1213E/1KG4 is electrically equivalent to the ADS1213E/1K in the verified cross-reference information, but it changes the ordering suffix rather than introducing a different converter function. Both identify a 22-bit ADS1213 with four inputs, a 6.25-kSPS rate, and a 28-pin SSOP package. Because the suffix can encode packaging or orderable-code details, engineers should verify the complete ordering table and customer drawing before treating the two as production-identical.
What can replace ADS1213E/1K?
The closest verified replacement is ADS1213E/1KG4, which retains the ADS1213E/1K converter configuration and 28-pin SSOP construction while changing the orderable suffix. No additional distinct drop-in replacements could be confirmed from the cross-reference results without assuming package, pin, or electrical equivalence. For a new design, also consider Texas Instruments ADS124S08 or ADS1256 as modernization options when a different package and interface design are acceptable.
ADS1213E/1K vs ADS1213U/1KG4 - which is better?
ADS1213E/1K should be preferred when the design specifically calls for the 28-pin SSOP ordering configuration identified by Texas Instruments. The cross-reference material lists ADS1213U/1KG4 as a related ADS1213 ordering option, but it does not establish that the two have identical package pins. Compare the complete ordering tables, pinouts, temperature ratings, and package drawings before making a board-level substitution.
ADS1213E/1K vs ADS1240E - which is better for industrial sensing?
ADS1213E/1K is the better match when the design requires the established 22-bit, 6.25-kSPS, four-input ADS1213 architecture with an integrated PGA and 5 V supply. ADS1240E is a newer precision-converter family that TI also identifies as a future-design option, but it has a different product identity and may require different electrical, software, and board decisions. Neither part should be treated as a verified drop-in replacement without pin-level comparison.
Is ADS1213E/1K suitable for bridge and strain-gauge measurement?
Yes, ADS1213E/1K is suitable for many bridge and strain-gauge front ends because it combines four input channels with programmable gain and delta-sigma conversion at up to 6.25 kSPS. Its 5 V supply and integrated PGA can simplify conditioning around low-level sensors. The excitation scheme, common-mode range, input protection, settling time, and achievable system accuracy must still be designed around the actual bridge output.
When should I choose ADS1213E/1K over ADS124S08?
Choose ADS1213E/1K when maintaining an existing ADS1213-based design is more important than adopting a newer converter platform. It retains the well-defined 22-bit, 6.25-kSPS, four-input architecture and existing firmware expectations. Choose ADS124S08 when a new design can accommodate different electrical characteristics, interface behavior, package options, and software configuration, especially when long-term supply continuity motivates a technology migration.
Where can I buy ADS1213E/1K and what is the price?
Use the Request a Quote form on this page to request ADS1213E/1K pricing, stock confirmation, and lead time for the exact 28-pin SSOP ordering code. A distributor listing confirms that the exact MPN is commercially sourced, but a lone starting-price figure does not provide a reliable quantity-break schedule. The request form allows the order quantity and required delivery information to be reviewed without relying on a stale price.
What is the lead time for ADS1213E/1K?
The current lead time for ADS1213E/1K should be confirmed through the Request a Quote form on this page using the exact MPN and required quantity. Lead time can vary with order volume, package configuration, and production scheduling, so a general availability statement is not sufficient for procurement. The same request can confirm stock, minimum order quantity, and delivery expectations before a purchase order is released.
Is ADS1213E/1K in stock?
Inventory for ADS1213E/1K changes with market activity and order size, so current stock should be requested through the Request a Quote form on this page. Specify the required quantity, reel format, and target delivery date when requesting confirmation. The component is a standard industrial-temperature Texas Instruments ordering option, but a listing’s general stock statement should not be treated as a guaranteed allocation for a particular order.

Datos de referencia de ingeniería para ADS1213E/1K — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose ADS1213E/1K when a design needs a 22-bit, four-input, 6.25-kSPS delta-sigma converter with an integrated PGA, internal or external reference, and a 28-pin SSOP footprint. It is a strong fit for bridge sensors, industrial transmitters, temperature acquisition, and laboratory instruments whose signal rates are moderate but measurement resolution is important. ADS1213E/1KG4 is the closest verified ordering alternative and preserves the same headline electrical configuration and package, although its ordering suffix should be checked against the customer drawing. Consider ADS124S08 or ADS1256 for a new platform when future supply continuity is important and a change in package, interface, or firmware is acceptable. Do not use ADS1240E, ADS1256, or ADS1213U/1KG4 as automatic drop-in replacements; the verified material does not establish identical pin compatibility for those choices.

Comparación con alternativas

Parámetro Este producto ADS1213E/1KG4
Package SSOP-28 (DB) SSOP-28 (DB)
Brand Texas Instruments Texas Instruments
ADC Resolution 22 bit 22 bit
Conversion Rate 6.25 kSPS 6.25 kSPS
Analog Input Channels 4 channels 4 channels
Supply Voltage 5 V 5 V
Reference Type Internal or external Internal or external
Programmable Gain Amplifier Integrated PGA Integrated PGA

Diferenciadores clave

  • Closest verified ordering alternative retains identical conversion specifications (frente a ADS1213E/1KG4)
  • Combines multichannel conversion and programmable gain in one device (frente a ADS1213E/1KG4)
  • Supports precision conversion at a moderate 6.25-kSPS ceiling (frente a ADS1213E/1KG4)

Notas de diseño

Place the reference bypass capacitor and analog-input bypass components directly beside their associated ADS1213E/1K pins. Keep the analog-input traces short and route them away from the serial clock, data lines, inductors, and switching-regulator nodes. The exposed-pad or thermal arrangement and exact decoupling values should follow the manufacturer’s layout guidance. A quiet reference return is particularly important because reference and input ground currents can create conversion error if they share a noisy digital path.

Choose the serial-interface rate and data-filter settings as one system-level decision. The converter can reach 6.25 kSPS, but a lower data rate can reduce noise and improve settling for slow sensors. Check the required conversion sequence against the serial clock timing and microcontroller receive capability. For long traces between the ADC and controller, use a controlled-length interface, a ground reference beside the signal path, and series damping only if timing and edge-rate analysis support it.

Do not select PGA gain or excitation voltage without checking the absolute input and common-mode limits. Bridge outputs can exceed the converter’s permitted common-mode range even when their differential magnitude is small. Likewise, a sensor output that is valid for a 3.3 V system may exceed the ADS1213E/1K limits if paired with a 5 V excitation. Review the pin table, input-protection limits, operating temperature, and gain settings in the manufacturer datasheet before finalizing the analog front end.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Yes
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The exact ADS1213E/1K listing identifies the component as RoHS-compliant, lead-free, and green. No automotive qualification or REACH statement was established for this ordering code.

Búsquedas relacionadas

ADS1213E/1K datasheet ADS1213E/1K pinout ADS1213E/1K datasheet pdf ADS1213E/1K equivalent ADS1213E/1K replacement ADS1213E/1K drop-in replacement ADS1213E/1K cross reference ADS1213E/1K vs ADS1213E/1KG4 ADS1213E/1K SSOP-28 pinout ADS1213E/1K application circuit ADS1213E/1K price ADS1213E/1K stock Texas Instruments ADS1213E/1K ADS1213E/1K 22 bit 6.25 kSPS ADC ADS1213E/1K bridge sensor ADC

Componentes & términos relacionados

Texas Instruments ADS1213E/1K ADS1213E/1KG4 ADS124S08 ADS1256 ADS1240E ADS1213U/1KG4 delta-sigma ADC analog-to-digital converter data converter IC precision measurement programmable gain amplifier PGA voltage reference 22-bit resolution 6.25 kSPS four-channel multiplexer SSOP-28 SSOP family gull-wing package surface-mount device industrial temperature range bridge sensor strain gauge process control RoHS
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ