ADS1213E/1K - 22-Bit 4-Channel Delta-Sigma ADC | Texas Instruments
MPN: ADS1213E/1K ✓ Hoạt độngADS1213E/1K Tóm tắt
A delta-sigma ADC is a type of analog-to-digital converter that uses a high-resolution internal modulator and digital filtering to convert continuous analog voltages into digital codes. The ADS1213 belongs to the ADC, data-converter IC, and signal-processing semiconductor hierarchies. It is intended for precision measurement systems requiring high resolution, integrated channel multiplexing, and flexible gain control.
Key features include 22-bit nominal resolution, four analog input channels, conversion throughput up to 6.25 kSPS, and a programmable gain amplifier. The device supports internal and external voltage references, which permits either an on-chip reference implementation or a more precise external source. Its serial interface reduces the number of external connections required in multi-channel measurement equipment.
Technically, the converter combines delta-sigma conversion, digital filtering, channel multiplexing, and programmable gain in one integrated circuit. The four-input architecture makes it suitable for bridge, sensor, voltage, and current measurements that require multiple analog channels. Because it is a single-supply device, the converter simplifies system-level power planning when the measured signals remain within the supported analog input range.
Typical applications include industrial pressure and temperature measurement, strain-gauge and bridge excitation systems, laboratory instrumentation, process monitoring, and precision data-acquisition modules. The integrated programmable gain amplifier can reduce the need for external analog conditioning when the source signal lies within a selectable gain range.
A critical layout consideration is that reference, supply, and analog-input traces should be routed away from high-current digital switching paths. Place input and reference capacitors close to their associated pins, use a quiet ground return, and maintain consistent grounding between the converter and the sensor interface. Confirm the absolute and differential input limits before applying bipolar signals.
This page combines manufacturer specifications, package details, engineering guidance, application fit, and verified drop-in information to support component selection and PCB implementation without reproducing the complete manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho ADS1213E/1K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS1213E/1K (cùng hình factor và footprint) — khác nhau ở Architecture, Programmable Gain Amplifier, RoHS Status, Supply Voltage.
ADS1213E/1KG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS1213E/1K Tỷ lệ tối đa & tính chất điện
| ADC Resolution | 22 bit |
| Conversion Rate | 6.25 kSPS |
| Analog Input Channels | 4 channels |
| Device Channel Configuration | 8-channel device |
| Architecture | Delta-sigma |
| Điện áp cung cấp | 5 V |
| Reference Type | Internal or external |
| Programmable Gain Amplifier | Integrated PGA |
| Loại giao diện | Serial |
| Hộp | 28-pin SSOP (DB) |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Kiểu lắp đặt | Surface mount |
| Nhiệt độ hoạt động | -40°C to +85°C |
| Temperature Grade | Industrial |
| Packaging | Tape and reel |
| Trạng thái RoHS | Compliant |
| Lead-Free Status | Lead-free |
Hướng dẫn cấu hình chân ADS1213E/1K rectangular
Cấu hình chân cho ADS1213E/1K (rectangular gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho ADS1213E/1K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADS1213E/1K phù hợp cho 6 Áp dụngs: Industrial Pressure Transmitters, Strain-Gauge and Bridge Measurements, Precision Temperature Acquisition, Process-Control Instrumentation, Laboratory and Test Equipment, Data-Acquisition Modules.
Industrial Pressure Transmitters
ADS1213E/1K fits pressure-transmitter front ends that must digitize several low-level sensor signals accurately. Its 22-bit nominal resolution provides a high-resolution conversion stage, while the four-channel input multiplexer supports shared reference and diagnostic measurements. The 6.25-kSPS maximum rate is appropriate for many industrial pressure systems that favor filtering and stable readings over very high-speed sampling. The integrated PGA can reduce frontend gain requirements, although the selected gain must remain compatible with the bridge or transducer output common-mode range. A single 5 V supply also simplifies transducer-interface power planning. For reliable deployment, protect the inputs from industrial surges, route the sensor returns cleanly, and verify the converter’s settling behavior for the selected digital filter.
Được đề xuất
Strain-Gauge and Bridge Measurements
The ADS1213E/1K is well suited to strain-gauge and resistive-bridge instrumentation because it combines four analog inputs, programmable gain, and 22-bit nominal delta-sigma resolution. At up to 6.25 kSPS, it can acquire force, load, or displacement signals while applying the appropriate internal gain. The programmable gain amplifier helps match the converter input range to a small differential bridge output, but common-mode voltage and allowable gain must be checked carefully because both determine usable signal headroom. Supply excitation and analog grounds should be arranged so switching currents do not appear in the bridge return path. Place reference and input bypass components near the device, and use a stable excitation source when system accuracy must be dominated by the mechanical sensor rather than the ADC.
Được đề xuất
Precision Temperature Acquisition
ADS1213E/1K can serve precision temperature-measurement systems using RTDs, thermocouple conditioning, or resistive sensors. Its 22-bit nominal resolution is valuable when the final temperature resolution is limited by sensor accuracy rather than conversion speed, and the 6.25-kSPS rate is more than sufficient for many thermal-loop and laboratory channels. Four inputs allow measurement of active sensors alongside reference or diagnostic channels. The internal or external reference choice lets the design balance simplicity against stability, with an external reference potentially improving tracking performance when supported by the sensor and excitation architecture. Keep thermocouple and RTD wiring away from power converters and motor nodes, use appropriate input filtering, and validate the complete sensor-to-digital path for offset, drift, and settling.
Được đề xuất
Process-Control Instrumentation
ADS1213E/1K supports process-control modules that monitor several slow or medium-speed analog variables from sensors, transmitters, or laboratory fixtures. The 6.25-kSPS conversion rate accommodates many closed-loop measurement loops, while the four-channel multiplexer reduces the number of separate converter packages needed. Its integrated PGA and selectable reference architecture help standardize input conditioning across channels. For a process panel, filtering and selectable data rates can suppress 50/60-Hz-related interference when the required settling time permits, but the digital-filter configuration must be checked against update timing. Keep analog routing compact, provide a clean reference return, isolate motor and relay loads from the converter ground, and perform channel-by-channel calibration to account for gain, offset, and sensor variation.
Được đề xuất
Laboratory and Test Equipment
ADS1213E/1K is appropriate for laboratory instruments that digitize low-level analog measurements and need high nominal resolution rather than maximum sampling frequency. The four analog inputs can support multiplexed transducer channels, and the programmable gain amplifier allows a single converter to handle signals occupying different amplitude ranges. The 5 V analog supply and 6.25-kSPS maximum throughput simplify synchronization with embedded control hardware. In an instrument, the converter’s internal digital filter can reject noise outside the usable bandwidth, so selecting a slower data rate may improve measurement stability without requiring analog changes. Shield sensitive inputs, use a dedicated analog ground region, separate digital return currents from reference returns, and verify calibration behavior over temperature if measurement accuracy is critical.
Được đề xuất
Data-Acquisition Modules
ADS1213E/1K can form the measurement core of compact data-acquisition modules requiring several channels and consistent high-resolution conversion. Its multiplexed four-input architecture, programmable gain amplifier, and internal or external reference support different sensor types behind a common acquisition interface. At 6.25-kSPS, the converter is appropriate for environmental, vibration-envelope, laboratory, and industrial monitoring channels that do not require megahertz-class sampling. A practical design should preserve the selected reference and analog-input impedance by keeping traces short and placing bypass capacitors at the device. Include calibration words or system-level offset and gain correction where precision matters, and avoid sharing high-current return paths between the reference and sensor circuitry.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADS1213E/1K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADS1213E/1KG4 |
|---|---|---|
| Package | SSOP-28 (DB) | SSOP-28 (DB) |
| Brand | Texas Instruments | Texas Instruments |
| ADC Resolution | 22 bit | 22 bit |
| Conversion Rate | 6.25 kSPS | 6.25 kSPS |
| Analog Input Channels | 4 channels | 4 channels |
| Supply Voltage | 5 V | 5 V |
| Reference Type | Internal or external | Internal or external |
| Programmable Gain Amplifier | Integrated PGA | Integrated PGA |
Bảo phân biệt quan trọng
- Closest verified ordering alternative retains identical conversion specifications (vsADS1213E/1KG4)
- Combines multichannel conversion and programmable gain in one device (vsADS1213E/1KG4)
- Supports precision conversion at a moderate 6.25-kSPS ceiling (vsADS1213E/1KG4)
Ghi chú thiết kế
Place the reference bypass capacitor and analog-input bypass components directly beside their associated ADS1213E/1K pins. Keep the analog-input traces short and route them away from the serial clock, data lines, inductors, and switching-regulator nodes. The exposed-pad or thermal arrangement and exact decoupling values should follow the manufacturer’s layout guidance. A quiet reference return is particularly important because reference and input ground currents can create conversion error if they share a noisy digital path.
Choose the serial-interface rate and data-filter settings as one system-level decision. The converter can reach 6.25 kSPS, but a lower data rate can reduce noise and improve settling for slow sensors. Check the required conversion sequence against the serial clock timing and microcontroller receive capability. For long traces between the ADC and controller, use a controlled-length interface, a ground reference beside the signal path, and series damping only if timing and edge-rate analysis support it.
Do not select PGA gain or excitation voltage without checking the absolute input and common-mode limits. Bridge outputs can exceed the converter’s permitted common-mode range even when their differential magnitude is small. Likewise, a sensor output that is valid for a 3.3 V system may exceed the ADS1213E/1K limits if paired with a 5 V excitation. Review the pin table, input-protection limits, operating temperature, and gain settings in the manufacturer datasheet before finalizing the analog front end.
Thông tin tuân thủ
The exact ADS1213E/1K listing identifies the component as RoHS-compliant, lead-free, and green. No automotive qualification or REACH statement was established for this ordering code.