ADS5433IPJYR - 14-Bit 80 MSPS ADC | Texas Instruments | 5V/3.3V
N.º de pieza: ADS5433IPJYR ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $35 | $35,00 |
| 10 | $31.5 | $315,00 |
| 100 | $28 | $2.800,00 |
| 500 | $24.5 | $12.250,00 |
| 1.000 | $21 | $21.000,00 |
ADS5433IPJYR Descripción general
An ADC (Analog-to-Digital Converter) is a mixed-signal integrated circuit that samples a continuous-time analog voltage and produces a discrete-time digital code proportional to the input amplitude. ADCs sit within the data-conversion hierarchy: SAR ADC and pipeline ADC are the two dominant high-speed architectures, with pipeline ADCs favored for sample rates above ~10 MSPS where conversion speed and wide input bandwidth outweigh SAR's latency advantage. ADCs belong to the broader category of data converters, which also include DACs (digital-to-analog converters) and CODECs. The ADS5433IPJYR is a pipeline ADC optimized for applications where dynamic performance, sample rate, and wide input bandwidth are critical design parameters.
Key features of the ADS5433IPJYR include 14-bit resolution, 80 MSPS maximum sample rate, 5 V analog supply, 3.3 V digital supply, and 3.3 V CMOS-compatible digital outputs that interface directly with ASICs, FPGAs, and DSP processors. The device features a maximum analog input voltage of 2.2 V and integrated reference circuitry. The wideband track-and-hold front end delivers high spurious-free dynamic range (SFDR) and signal-to-noise ratio (SNR) at IF inputs, making the part well-suited for communications, radar, and test-and-measurement applications.
At the architectural level, the ADS5433IPJYR uses a multi-stage pipeline with digital error correction. Each stage resolves a subset of bits and passes the residue to the next stage, producing a one- to two-cycle latency between sample acquisition and output code availability. The internal reference and sample-and-hold amplifier minimize external component count; however, careful attention to analog-input drive network and clock-jitter cleanliness is required to preserve SNR at higher input frequencies.
Typical applications for the ADS5433IPJYR include communications base-station IF sampling, medical imaging front ends, CCD and CIS sensor digitizers, high-speed data acquisition cards, and radar processing subsystems. Its 52-pin QFP footprint is well-suited for production PCBs using standard SMT assembly lines.
When designing with the ADS5433IPJYR, drive the analog input through a wideband differential amplifier or transformer network to maximize SFDR, and provide a low-jitter clock to the CLK input to preserve SNR. Decouple the 5 V AVDD and 3.3 V DRVDD rails independently near the device to minimize digital-to-analog coupling through the package substrate.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the ADS5433IPJYR - content not aggregated in the standalone manufacturer datasheet.
Alternativas directas para ADS5433IPJYR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ADS5433IPJYR (mismo factor de forma y huella) — difiere en Package, Input Type, Digital Output Type, Operating Temperature Range, Architecture.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
ADS5433IPJYG3
✅ Sustitución directa✓ En stock
$24.95 / unidad
Ver hoja de datos →ADS5424IPJYG3
✅ Sustitución directa✓ En stock
$25.1 / unidad
Ver hoja de datos →ADS5423MPJYEP
✅ Sustitución directa✓ En stock
$52.85 / unidad
Ver hoja de datos →ADS5433IPJYG3
✅ Sustitución directa✓ En stock
$24.95 / unidad
Ver hoja de datos →ADS5433IPJYR Valores máximos y características eléctricas
| Resolución | 14 bit |
| Sample Rate | 80 MSPS |
| Number of Channels | 1 |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 3.3 V |
| Digital Output Type | 3.3 V CMOS |
| Maximum Analog Input Voltage | 2.2 V |
| Architecture | Pipeline |
| Input Type | Differential |
| Encapsulado | 52-pin QFP (PJY) |
| Tipo de montaje | Surface Mount |
| Rango de temperatura de funcionamiento | -40C to +85C |
| Terminal Count | 52 |
| Terminal Style | Gull Wing |
| Estado RoHS | Compliant |
| Lead-Free | Yes |
Configuración de pines de ADS5433IPJYR
| Pin 1 | AVDD — Analog 5V supply |
| Pin 2 | AVDD — Analog 5V supply |
| Pin 3 | GND — Analog ground |
| Pin 4 | GND — Analog ground |
| Pin 5 | CLK — Sample clock input |
| Pin 6 | CLKBN — Complementary clock input |
| Pin 7 | GND — Analog ground |
| Pin 8 | AIN — Analog input (positive) |
| Pin 9 | AINB — Analog input (complementary) |
| Pin 10 | VREF — Internal reference voltage |
| Pin 11 | GND — Analog ground |
| Pin 12 | SEN — Sensor/sense input |
| Pin 13 | GND — Digital ground |
| Pin 14 | DRVDD — Digital 3.3V supply |
| Pin 15 | D13 — Data output bit 13 (MSB) |
| Pin 16 | D12 — Data output bit 12 |
| Pin 17 | D11 — Data output bit 11 |
| Pin 18 | D10 — Data output bit 10 |
| Pin 19 | D9 — Data output bit 9 |
| Pin 20 | D8 — Data output bit 8 |
| Pin 21 | D7 — Data output bit 7 |
| Pin 22 | D6 — Data output bit 6 |
| Pin 23 | D5 — Data output bit 5 |
| Pin 24 | D4 — Data output bit 4 |
| Pin 25 | D3 — Data output bit 3 |
| Pin 26 | D2 — Data output bit 2 |
| Pin 27 | D1 — Data output bit 1 |
| Pin 28 | D0 — Data output bit 0 (LSB) |
| Pin 29 | DRVDD — Digital 3.3V supply |
| Pin 30 | GND — Digital ground |
| Pin 31 | DRVDD — Digital 3.3V supply |
| Pin 32 | GND — Digital ground |
| Pin 33 | GND — Digital ground |
| Pin 34 | NC — Not connected (per datasheet) |
| Pin 35 | NC — Not connected (per datasheet) |
| Pin 36 | AVDD — Analog 5V supply |
| Pin 37 | GND — Analog ground |
| Pin 38 | NC — Not connected (per datasheet) |
| Pin 39 | NC — Not connected (per datasheet) |
| Pin 40 | AVDD — Analog 5V supply |
| Pin 41 | GND — Analog ground |
| Pin 42 | AVDD — Analog 5V supply |
| Pin 43 | GND — Analog ground |
| Pin 44 | AVDD — Analog 5V supply |
| Pin 45 | GND — Analog ground |
| Pin 46 | NC — Not connected (per datasheet) |
| Pin 47 | NC — Not connected (per datasheet) |
| Pin 48 | AVDD — Analog 5V supply |
| Pin 49 | GND — Analog ground |
| Pin 50 | NC — Not connected (per datasheet) |
| Pin 51 | NC — Not connected (per datasheet) |
| Pin 52 | NC — Not connected (per datasheet) |
Aplicaciones típicas
ADS5433IPJYR es adecuado para 6 aplicacións: Communications IF Sampling, Medical Imaging Front End, CCD and CIS Sensor Digitizers, High-Speed Data Acquisition Cards, Radar Signal Processing, Industrial Test and Measurement.
Communications IF Sampling
The ADS5433IPJYR fits communications IF sampling because its 14-bit resolution and 80 MSPS sample rate provide sufficient dynamic range for digitizing intermediate-frequency signals in software-defined radio and cellular base-station receivers. According to the manufacturer datasheet, the wideband front-end track-and-hold amplifier preserves harmonic performance at high input frequencies, which is critical for maintaining SFDR in the presence of strong interferers. The 3.3 V CMOS digital outputs connect directly to FPGAs running digital downconversion firmware, eliminating the need for level shifters. Drive the analog input through a wideband transformer or differential amplifier network to maximize SNR, and supply a low-jitter clock to the CLK input to preserve noise performance. Compared to a 12-bit ADC, the 14-bit width adds ~12 dB theoretical SNR headroom, helping receivers resolve weak adjacent-channel signals in dense spectral scenes.
Recomendado
Medical Imaging Front End
The ADS5433IPJYR is well-suited to medical imaging front ends, including ultrasound beamformers, CT scanner digitizer channels, and MRI receiver signal chains. The 14-bit resolution provides ~84 dB theoretical dynamic range, which is essential for capturing low-amplitude tissue-reflected echoes while still resolving strong direct signals. The 80 MSPS sample rate handles typical ultrasound IF bandwidths of 20-40 MHz with comfortable Nyquist margin. According to the manufacturer datasheet, the differential analog input reduces common-mode noise pickup, which is essential in electrically noisy hospital environments. Place an anti-alias low-pass filter ahead of the input to suppress out-of-band energy before sampling, and decouple the 5 V analog rail with 10 uF and 0.1 uF ceramic capacitors close to the AVDD pins to minimize switching noise on the converter's reference ladder.
Recomendado
CCD and CIS Sensor Digitizers
The ADS5433IPJYR works well in CCD and CMOS image sensor (CIS) digitizer channels for industrial cameras, machine-vision systems, and scientific instrumentation. The 14-bit resolution captures subtle tonal gradations in low-contrast scenes, which is critical for quality-control imaging and spectroscopy. The 80 MSPS sample rate accommodates multi-megasixel line-scan cameras operating at line rates that produce tens of megasamples per second when parallel channels are aggregated. According to the manufacturer datasheet, the integrated on-chip reference reduces drift over temperature, which is essential for repeatable image data. Drive the analog input from a transimpedance amplifier (TIA) front end optimized for the photodiode capacitance, and provide a correlated double-sampling timing signal synchronized to the sensor's pixel clock for maximum SNR.
Recomendado
High-Speed Data Acquisition Cards
The ADS5433IPJYR is widely deployed in PCI/PCIe and PXI data-acquisition cards used in test-and-measurement equipment. The 14-bit, 80 MSPS specification provides sufficient dynamic range and bandwidth for digitizing transient signals in oscilloscope front ends, spectrum analyzer IF paths, and arbitrary-waveform-generator capture modes. According to the manufacturer datasheet, the CMOS digital outputs can be routed directly to an FPGA for real-time triggering and decimation. Compared to an 8-bit oscilloscope ADC, the 14-bit width offers 36 dB additional dynamic range - a 63x improvement in voltage-resolution granularity. Use a low-jitter clock source and matched-impedance analog input traces to preserve SNR; place the converter close to the analog input connector to minimize track-length-induced bandwidth loss.
Recomendado
Radar Signal Processing
The ADS5433IPJYR is suitable for radar signal-processing subsystems, particularly in marine, weather, and short-range surveillance radar receivers. The 14-bit resolution captures weak return signals in the presence of strong clutter, which is essential for target detection at long range. The 80 MSPS sample rate handles IF bandwidths typical of pulsed-Doppler radar receivers operating at intermediate frequencies up to 30 MHz. According to the manufacturer datasheet, the wideband track-and-hold amplifier provides excellent spurious-free dynamic range, which is critical for separating small radar returns from large clutter echoes. Use a bandpass filter ahead of the input to limit out-of-band noise, and synchronize the ADC's sampling clock to the radar's PRF (pulse repetition frequency) to enable coherent integration across multiple pulses.
Recomendado
Industrial Test and Measurement
The ADS5433IPJYR supports industrial test-and-measurement applications such as power-line monitoring, vibration analysis, and acoustic emission testing. The 14-bit resolution captures small signal variations in noisy industrial settings, while the 80 MSPS sample rate handles vibration spectra up to 40 kHz with ample oversampling margin. The -40C to +85C operating temperature range, per the manufacturer datasheet, makes the part suitable for factory-floor and outdoor instrumentation enclosures. The 5 V analog and 3.3 V digital supply rails simplify integration with mixed-signal industrial controllers. Add an input protection network (clamping diodes and series resistor) ahead of the analog input to survive ESD events during commissioning, and isolate the digital outputs from noisy industrial buses with proper ground-plane partitioning.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADS5433IPJYR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADS5433IPJYG3 | ADS5424IPJYG3 | ADS5423MPJYEP | ADS5433IPFY |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 52-pin QFP (PJY) | 52-pin QFP (PJY) | 52-pin QFP (PJY) | 52-pin QFP (PJY) | 52-pin QFP (PJY) |
| Resolution | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit |
| Sample Rate | 80 MSPS | 80 MSPS | 105 MSPS | 125 MSPS | 80 MSPS |
| Analog Supply | 5 V | 5 V | 5 V | 5 V | 5 V |
| Digital Supply | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Digital Output Type | CMOS 3.3 V | CMOS 3.3 V | CMOS 3.3 V | CMOS 3.3 V | CMOS 3.3 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -55C to +125C (military) | -40C to +85C |
Diferenciadores clave
- Widely available production ADC with mature ecosystem (frente a ADS5423MPJYEP)
- Optimized 80 MSPS sample rate for cost-sensitive designs (frente a ADS5424IPJYG3)
- RoHS-compliant Green variant available (frente a ADS5433IPFY)
Notas de diseño
Decouple the 5 V analog supply (AVDD) and the 3.3 V digital supply (DRVDD) independently near the device with 10 uF bulk plus 0.1 uF ceramic capacitors placed as close to the supply pins as possible. Use separate analog and digital ground planes joined at a single point beneath the device to minimize switching noise coupling from the CMOS output drivers into the analog front end. According to the Texas Instruments datasheet, this decoupling strategy is essential to preserve SNR at high input frequencies.
Drive the analog input through a wideband differential transformer or differential amplifier network to maximize spurious-free dynamic range (SFDR). Source the sample clock from a low-jitter oscillator and route it via a 50-ohm matched trace to the CLK input - jitter above 1 ps rms directly degrades SNR at high input frequencies. For input frequencies above 30 MHz, use a bandpass anti-alias filter ahead of the analog input to suppress out-of-band energy that would otherwise fold into the Nyquist band.
Place the ADS5433IPJYR close to the analog input connector to minimize track-length-induced bandwidth loss. Keep analog input traces matched in length and impedance, and surround them with a continuous ground pour on the adjacent layer. Route digital output traces on the opposite side of the PCB or on inner layers to avoid crosstalk into the analog input path. Place the differential clock trace adjacent to a continuous ground reference to maintain 50-ohm characteristic impedance and minimize radiated emissions.
The ADS5433IPJYR dissipates approximately 1.5 W typical at 80 MSPS, so thermal management is required for reliability. Provide a copper pour on the PCB beneath and around the QFP-52 package to spread heat, and ensure adequate airflow or thermal vias to inner ground planes in enclosed chassis. Per the Texas Instruments datasheet, junction temperature must remain below 150 C for reliable operation; this corresponds to approximately 65 C ambient with the standard 52-pin QFP thermal resistance.
Información de cumplimiento
RoHS compliant per distributor listings. AEC-Q100 not applicable - this is a general-purpose ADC, not an automotive-qualified part. Lead-free per Texas Instruments datasheet.
