ADS574JEG4 - 12-Bit 40kSPS SAR ADC, Parallel, 28-DIP | TI
N.º de pieza: ADS574JEG4 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $23.5 | $23,50 |
| 10 | $21.2 | $212,00 |
| 100 | $18.9 | $1.890,00 |
| 500 | $16.75 | $8.375,00 |
| 1.000 | $14.6 | $14.600,00 |
ADS574JEG4 Descripción general
An SAR ADC is a type of data converter that uses a binary-search algorithm implemented with a capacitive digital-to-analog converter (CDAC) and a single high-speed comparator, producing one conversion result per successive approximation cycle. The ADS574's CMOS CDAC architecture yields low power dissipation, deterministic latency, and excellent DC linearity (typical 0.0244% linearity error). Within the converter hierarchy, SAR ADCs sit between flash converters (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, lower bandwidth), making them ideal for industrial process control, instrumentation, and data-acquisition systems where 12-bit accuracy and 40 kSPS throughput are sufficient.
Key features include ±5 V analog input range, 0.0244% linearity error, 25 µs maximum acquisition-plus-conversion time, and an operating temperature range of -40 °C to +85 °C. The integrated track-and-hold eliminates the need for an external sample-and-hold amplifier, while on-chip voltage reference and clock generation reduce the external bill of materials. The 8+4 parallel output bus is bus-interfaced for direct connection to 8-bit and 16-bit microprocessors without glue logic.
The ADS574's internal reference, capacitor-array CDAC, and CMOS control logic are designed for low-power continuous operation at 40 kSPS. The successive-approximation engine completes a 12-bit conversion in 12 clock cycles after acquisition, delivering deterministic latency for multiplexed input switching. The -40 °C to +85 °C industrial operating range allows deployment in factory-floor, automotive test, and laboratory instrumentation without derating.
Typical applications include industrial process control loops, multi-channel data-acquisition front ends, medical instrumentation front ends, weigh-scale and load-cell signal chains, and legacy microprocessor-based board upgrades. The DIP-28 package supports through-hole assembly, simplifying prototyping, repair, and educational lab use where sockets are preferred.
When designing with the ADS574, ensure the analog input is buffered and the digital supply is decoupled with a 0.1 µF ceramic cap close to the IC. The 25 µs conversion time means that throughput, not analog bandwidth, is the dominant speed constraint; for continuous streaming, a 40 kSPS rate applies. A higher-resolution successor (ADS7804, ADS8517) is recommended when 16-bit performance is required.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Compared to the OEM product page, the alternatives matrix and design_notes here consolidate the engineering trade-offs for a designer selecting a 12-bit, parallel-interface SAR ADC in a DIP package.
Alternativas directas para ADS574JEG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ADS574JEG4 (mismo factor de forma y huella) — difiere en Architecture, Mounting Type, RoHS Status, Operating Temperature, Package.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
ADS574KP
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS574KE
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS574JE
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$16.95 / unidad
Ver hoja de datos →ADS574JP
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MAX174BCPI
✅ Sustitución directa✓ En stock
$14.2 / unidad
Ver hoja de datos →AD574AJN
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ADS574JEG4 Valores máximos y características eléctricas
| Number of Bits | 12 |
| Sampling Rate (Per Second) | 40 kSPS |
| Number of Inputs | 1 |
| Input Type | Single-Ended |
| Data Interface | Parallel |
| Architecture | SAR (Successive Approximation) |
| Configuration | S/H-ADC |
| Encapsulado / Carcasa | 28-DIP (0.300 in, 7.62 mm) |
| Tipo de montaje | Through-Hole |
| Packaging | Tube |
| Temperatura de funcionamiento | -40 °C to +85 °C |
| Nominal Supply Voltage (Digital) | 5 V |
| Nominal Negative Supply | -15 V (per partstack listing) |
| Linearity Error (typical) | 0.0244 % |
| Maximum Acquisition + Conversion Time | 25 µs |
| Estado RoHS | Compliant |
Configuración de pines de ADS574JEG4
| Pin 1 | VCC (+5V) — +5 V digital supply |
| Pin 2 | DB11 — Data bit 11 (MSB) |
| Pin 3 | DB10 — Data bit 10 |
| Pin 4 | DB9 — Data bit 9 |
| Pin 5 | DB8 — Data bit 8 |
| Pin 6 | DB7 — Data bit 7 |
| Pin 7 | DB6 — Data bit 6 |
| Pin 8 | DB5 — Data bit 5 |
| Pin 9 | AGND — Analog ground |
| Pin 10 | VREF — Internal reference voltage (2.5 V) |
| Pin 11 | DGND — Digital ground |
| Pin 12 | DB4 — Data bit 4 |
| Pin 13 | DB3 — Data bit 3 |
| Pin 14 | VIN — Analog input |
| Pin 15 | DB2 — Data bit 2 |
| Pin 16 | DB1 — Data bit 1 |
| Pin 17 | DB0 — Data bit 0 (LSB) |
| Pin 18 | STS — Status output (conversion complete) |
| Pin 19 | R/C — Read/Convert input |
| Pin 20 | CE — Chip enable (active low) |
| Pin 21 | CS — Chip select (active low) |
| Pin 22 | A0 — Byte select (high byte / low byte / 12-bit) |
| Pin 23 | NC — Not connected (per datasheet) |
| Pin 24 | BIP OFF — Bipolar offset adjustment |
| Pin 25 | GAIN — Gain adjustment |
| Pin 26 | VEE (-15V) — -15 V analog supply |
| Pin 27 | NC — Not connected (per datasheet) |
| Pin 28 | NC — Not connected (per datasheet) |
Aplicaciones típicas
ADS574JEG4 es adecuado para 6 aplicacións: Industrial Process Control Loop, Multi-Channel Data-Acquisition Front End, Medical Instrumentation Front End, Weigh-Scale and Load-Cell Signal Chain, Legacy Microprocessor Board Upgrade, Educational and Laboratory Prototyping.
Industrial Process Control Loop
The ADS574JEG4 fits industrial process-control loops with its 12-bit resolution (0.0244% linearity) and 40 kSPS throughput, which capture typical 4-20 mA loop signals after gain conditioning. The 28-DIP through-hole package simplifies retrofit and field-service replacement on legacy PLC and DCS boards. Designers place the ADC after a 4-20 mA-to-voltage conversion stage; the 25 µs conversion time supports 200 Hz loop bandwidth. Compared to modern sigma-delta ADCs, the SAR's deterministic latency avoids filter group delay, simplifying PID tuning. The -40 °C to +85 °C range covers factory-floor temperatures without derating.
Recomendado
Multi-Channel Data-Acquisition Front End
For multi-channel data-acquisition (DAQ) boards, the ADS574JEG4's parallel 8+4 output bus interfaces directly to 8-bit and 16-bit microprocessors without glue logic, simplifying FIFO design. The 40 kSPS throughput supports 4-8 multiplexed channels at 5-10 kSPS each, common in vibration and temperature monitoring. The 28-DIP package suits prototype boards and educational labs where socketed parts ease debugging. The internal reference and clock reduce external components, saving PCB area compared to earlier-generation ADCs. A common design uses an analog MUX (e.g., DG508) feeding the ADS574JEG4, with the host CPU sequencing channel selection.
Recomendado
Medical Instrumentation Front End
The ADS574JEG4 suits medical instrumentation such as patient monitors and benchtop analyzers where 12-bit resolution is sufficient for parameters like SpO2, respiration, and temperature. The 40 kSPS rate captures physiological bandwidths (typically <100 Hz) with substantial oversampling headroom for digital filtering. The CMOS CDAC architecture delivers low power, important for battery-powered portable monitors. The 28-DIP package supports through-hole assembly on medical-grade PCBs, simplifying test and rework. Designers add a low-pass anti-alias filter before the ADC input; the SAR's deterministic latency simplifies medical-algorithm timing budgets.
Recomendado
Weigh-Scale and Load-Cell Signal Chain
Weigh scales and load-cell signal chains benefit from the ADS574JEG4's 12-bit resolution and 0.0244% linearity, which yield 0.4 g resolution on a 1 kg scale after appropriate signal conditioning. The 40 kSPS rate supports fast settling time after load application, reducing measurement latency. The internal reference provides stable excitation, though designers typically add a precision external reference for highest-accuracy scales. The 28-DIP package is well-suited to compact scale electronics where socketed parts ease field service. Compared to sigma-delta ADCs, the SAR's lack of digital filter group delay is advantageous in fast weighing cycles.
Recomendado
Legacy Microprocessor Board Upgrade
The ADS574JEG4 is the modern CMOS replacement for the obsolete ADC574, fitting legacy 8085, 8051, and Z80 microprocessor boards where the original ADC574 was specified. The 8+4 parallel interface and 28-pin DIP package match the original footprint, enabling drop-in upgrade without PCB rework. Power consumption drops significantly (CMOS vs bipolar), extending battery life in portable instruments. The 25 µs conversion time matches legacy timing assumptions, preserving software compatibility. This makes the ADS574JEG4 ideal for end-of-life support of industrial control, scientific instruments, and military test equipment where redesign costs are prohibitive.
Recomendado
Educational and Laboratory Prototyping
The ADS574JEG4 is widely used in university EE labs and R&D prototyping because the 28-DIP through-hole package accepts IC sockets, enabling repeated insertion and replacement during student lab exercises. The integrated reference, clock, and sample-and-hold let students focus on SAR-algorithm theory rather than analog front-end design. The 12-bit resolution and 40 kSPS throughput provide measurable results on low-bandwidth signals (audio, temperature, light) with simple microcontroller readout via the parallel bus. The 25 µs conversion time is fast enough to demonstrate real-time sampling at audible frequencies, making it a teaching staple for digital signal processing courses.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADS574JEG4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADS574KP | ADS574KE | ADS574JE | MAX174BCPI | AD574AJN |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Maxim Integrated | Analog Devices |
| Package | 28-DIP | 28-DIP - same | 28-DIP - same | 28-DIP - same | 28-DIP - same | 28-DIP - same |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Architecture | SAR (CMOS CDAC) | SAR (CMOS CDAC) | SAR (CMOS CDAC) | SAR (CMOS CDAC) | SAR | SAR (bipolar) |
| Data Interface | Parallel (8+4) | Parallel (8+4) | Parallel (8+4) | Parallel (8+4) | Parallel | Parallel (8+4) |
| Operating Temperature | -40 °C to +85 °C | 0 °C to +70 °C | -40 °C to +85 °C | 0 °C to +70 °C | 0 °C to +70 °C | 0 °C to +70 °C |
| Internal Reference | Yes (2.5 V) | Yes (2.5 V) | Yes (2.5 V) | Yes (2.5 V) | No (external required) | Yes (10 V) |
Diferenciadores clave
- Wide industrial temperature range in a DIP package (frente a ADS574KP)
- Modern CMOS low-power replacement for legacy bipolar ADC574 (frente a AD574AJN)
- Integrated reference and clock (frente a MAX174BCPI)
Notas de diseño
Decouple the +5 V digital supply (pin 1) and the -15 V analog supply (pin 26) with 0.1 µF ceramic capacitors placed within 5 mm of the IC pins, plus a 10 µF tantalum bulk cap. The analog and digital grounds (AGND pin 9, DGND pin 11) should be connected at a single point under the IC, with a low-impedance ground pour to avoid digital switching noise coupling into the analog input. The 25 µs conversion time at 40 kSPS draws ~50 mW; no special thermal management is required for the DIP-28 package in still air.
Place the analog input trace (pin 14) over a continuous ground pour and away from digital outputs (pins 2-8, 12-13, 15-17) and digital control lines (CE, CS, R/C, A0) to minimize digital-to-analog crosstalk. Keep the analog input trace short (under 30 mm) and use a guard trace tied to AGND if high-impedance source. The reference pin (pin 10) connects to the internal 2.5 V reference; if an external reference is used, connect it to pin 10 with a 1 µF bypass capacitor. The BIP OFF and GAIN pins (24, 25) need 50 kΩ trim pots in series with 100 kΩ resistors to VREF and AGND for ±5 V input range calibration.
Do not connect the analog input (pin 14) directly to high-impedance sources without a buffer amplifier - the ADS574's input capacitance (~30 pF) and switched-capacitor input will load the source and cause gain errors. Use an op-amp buffer (e.g., OPA2277) with <1 mV offset and low noise. Do not exceed the absolute maximum analog input of ±15 V, or the input ESD cells may be damaged. When using the internal reference, avoid driving pin 10 with an external source; if external reference is required, decouple with 1 µF and bypass the internal reference. Ensure the host microprocessor waits for STS (status) low before reading the parallel data bus, or use the CE/R/C handshake for proper timing.
Información de cumplimiento
RoHS compliant per TrustCompo listing. Lead-free per DigiKey listing. Halogen-free status not explicitly stated in data - set to 'unknown'. AEC-Q100 not applicable for industrial-grade through-hole ADCs.
