Texas Instruments

ADS7819P - 12-Bit 800 kSPS Single-Input ADC | Texas Instruments

N.º de pieza: ADS7819P ✓ Activo
28-pin PDIP Package
MOQ: 1 |

ADS7819P Descripción general

The Texas Instruments ADS7819P is a 12-bit, single-input analog-to-digital converter capable of 800 kSPS sampling and supplied in a 28-pin PDIP package. It belongs to the sampling ADC family, combining successive-approximation-register conversion with a parallel digital output interface. The device is intended for applications that require accurate digitization of rapidly changing analog signals while retaining a through-hole package for prototyping, legacy boards, and manually assembled industrial electronics.

An ADC is a data-conversion IC that transforms a continuously varying analog voltage into a numeric code suitable for processing by a microcontroller, DSP, FPGA, or other digital controller. In the broader electronics hierarchy, the ADS7819P is an analog-to-digital converter, a data converter, an analog and mixed-signal IC, and a semiconductor. The 12-bit resolution provides 4,096 discrete codes for a full-scale conversion range, while the 800 kSPS rating defines the device as a high-speed sampling converter suitable for waveform capture, industrial monitoring, instrumentation, and embedded control.

The defining product features are its 12-bit conversion resolution, one analog input, 800 kSPS conversion rate, parallel data interface, and 28-pin PDIP package. These characteristics distinguish it from slower general-purpose ADCs and from multiplexed converters designed to scan several channels. Because the device exposes one input, designers needing multiple analog sources may need an external analog multiplexer or must accept additional switching and acquisition-time considerations.

Technically, the ADS7819P uses a sampling architecture to acquire the input voltage and then converts it through a successive-approximation process. A sample-and-hold front end captures the selected input before conversion, while the digital output presents the measured code for the next device or control system to latch. The 800 kSPS capability makes sustained waveform acquisition practical, although the complete signal chain still depends on the source impedance, analog front end, reference voltage, acquisition timing, and digital data handling. Designers should treat converter performance as a system property rather than relying on nominal resolution alone.

Typical uses include industrial process monitoring, laboratory and test instrumentation, waveform digitization, digital control loops, embedded measurement systems, and replacement of legacy PDIP ADC designs. The parallel interface can simplify connections to older parallel buses and programmable logic, although it consumes more board space and signal lines than a serial ADC. The PDIP package is also easier to inspect, probe, and replace in prototypes than a fine-pitch surface-mount package.

For a new PCB, verify the acquisition network, reference arrangement, logic levels, timing, and thermal conditions against the manufacturer datasheet. Keep the analog input path short, provide suitable decoupling at the supply and reference pins, and account for logic levels when driving the parallel output. For an existing board, confirm that the replacement footprint, pin orientation, converter timing, and output coding match the original design before substitution.

This page organizes the available ADS7819P technical facts with engineering-focused application guidance, selection criteria, and verified source links. It focuses on the practical decisions that determine whether this 12-bit, 800 kSPS, single-channel PDIP ADC belongs on a new design or serves as a sensible replacement for an older board.

Alternativas directas para ADS7819P — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con ADS7819P (mismo factor de forma y huella) — difiere en Package, Resolution, Sampling Rate.

Texas Instruments
Package: 28-pin PDIP (N) 0.300 inch, through-hole
Resolution: 12 bits
Sampling Rate: 40 kSPS
Comparar con ADS7819P →

ADS7819PB

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-pin PDIP
Same ADS7819 family, 12-bit resolution, and 28-pin PDIP format; ordering and qualification suffixes require final verification, with no confirmed core-parameter difference

📋 Alternativa de referencia (no en el catálogo)

ADS7824PG4

✅ Sustitución directa
Texas Instruments
📦 28-pin PDIP
12 bits · 4 (single-ended / pseudo-differential) · 40 kSPS · 25 us max · SAR (Successive Approximation) · ±10 V (industrial, on-chip scaled) · ±0.1% · ±0.5 LSB max

Consulte el precio

Ver hoja de datos →

ADS7819P Valores máximos y características eléctricas

Converter Type 12-bit analog-to-digital converter
Resolución 12 bit
Number of Analog Inputs 1 input
Frecuencia de muestreo 800 kSPS
Tipo de salida Parallel
Conversion Architecture Successive-approximation-register
Encapsulado 28-pin PDIP
Recuento de pines 28 pins
Tipo de montaje Through-hole
Pitch 0.3 inch

Guía de configuración de pines de ADS7819P 28-pin pdip

Configuración de pines para ADS7819P (encapsulado 28-pin pdip). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 28-pin pdip para ADS7819P

No hay datos detallados de patillaje disponibles para ADS7819P.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ADS7819P es adecuado para 6 aplicacións: Industrial Process Monitoring, Waveform Digitization, Laboratory Test Equipment, Digital Control Systems, Embedded Data Acquisition, Legacy Instrumentation Repair.

🏭

Industrial Process Monitoring

The ADS7819P fits a single-channel industrial measurement system that must digitize a conditioned sensor signal quickly and transmit the result through a parallel data bus. Its 12-bit resolution gives 4,096 amplitude levels, while the 800 kSPS sampling rate allows substantially more frequent readings than a slow instrumentation ADC. Place the converter behind a suitable signal-conditioning amplifier, keep the input path short, and use stable reference and decoupling arrangements. The parallel output is particularly useful with legacy controllers that latch conversion results directly. Single-channel operation simplifies timing, although adding an external multiplexer would require careful validation of acquisition time and settling.

📈

Waveform Digitization

The ADS7819P can capture rapidly varying analog waveforms because its 800 kSPS conversion rate supports dense time-domain sampling. Its 12-bit output supplies 4,096 quantization levels per sample, making the device useful for monitoring repetitive signals, transient behavior, and industrial vibration or control waveforms. The system should trigger sampling coherently and latch the parallel result into a counter, FIFO, DSP, or FPGA. Input bandwidth and signal conditioning must be designed around the converter's acquisition characteristics rather than assuming the nominal sample rate alone defines usable bandwidth.

🧪

Laboratory Test Equipment

The ADS7819P is appropriate for laboratory instruments that measure one analog quantity at high update rates and retain a parallel digital interface. A 12-bit, 800 kSPS converter can support precision-oriented display, automated range measurement, and signal analysis when paired with a calibrated front end. Through-hole PDIP construction also simplifies prototype assembly and replacement compared with a fine-pitch surface-mount device. The instrument designer should account for reference accuracy, input noise, grounding, calibration, and the timing relationship between conversion start and output validity before defining measurement uncertainty.

⚙️

Digital Control Systems

The ADS7819P can serve as the measurement front end of a digital control loop that converts an analog command or feedback signal into a 12-bit code. Its 800 kSPS capability supports frequent control updates, while the parallel outputs can connect directly to suitable digital control logic. Because the converter has one analog input, a multi-axis controller would need multiplexing or separate converter channels. The loop designer should include the input filter, reference tolerance, and acquisition delay when calculating control-loop timing, and should verify that output polarity and coding match the controller interface.

🖥️

Embedded Data Acquisition

The ADS7819P supports embedded acquisition systems that need more sampling speed than a slow general-purpose ADC and more direct data access than a serial-interface converter can offer. Its 800 kSPS conversion rate and 12-bit resolution are well matched to recording a conditioned analog channel, while the 28-pin PDIP package remains convenient for industrial controller cards and prototypes. The downstream processor must capture the parallel bus without bus contention during conversion. Firmware and hardware should define conversion-start timing, data-valid handling, buffer depth, and scaling so no samples are overwritten or misaligned.

🔧

Legacy Instrumentation Repair

The ADS7819P is particularly useful for maintaining an existing 28-pin PDIP instrument or controller board. Its 12-bit single-channel conversion capability and parallel output align with the form of legacy data-acquisition circuits that used dedicated parallel ADCs. The through-hole package supports conventional soldering and socket-based service procedures. Before installing the device, compare the original part's pinout, supply voltage, reference configuration, conversion timing, and output coding with the ADS7819P datasheet. A visually similar package is not sufficient evidence of compatibility, so verify every net and timing condition before energizing the board.

Resumen de productos recomendados

ADS7819U Texas Instruments Se usa en: Industrial Process Monitoring, Laboratory Test Equipment, Digital Control Systems, Legacy Instrumentation Repair ADS7825U/1K Related 12-bit ADC family option requiring compatibility review Se usa en: Industrial Process Monitoring, Waveform Digitization, Digital Control Systems, Embedded Data Acquisition ADS7819PB Same-family PDIP candidate for evaluation during replacement planning Se usa en: Waveform Digitization, Laboratory Test Equipment, Embedded Data Acquisition, Legacy Instrumentation Repair
What is the ADS7819P?
The ADS7819P is a Texas Instruments 12-bit, single-input, 800 kSPS analog-to-digital converter in a 28-pin PDIP package. It uses a parallel digital output and a successive-approximation conversion architecture. The 12-bit resolution produces 4,096 codes, making it appropriate for moderately high-speed signal acquisition where a wired parallel interface and through-hole package are practical.
What is the conversion speed of ADS7819P?
The ADS7819P supports a maximum sampling rate of 800 kSPS. This figure applies to the 12-bit single-channel converter described by Texas Instruments. When calculating acquisition performance, include the signal source impedance, external sample-and-hold network, reference stability, and the time required to latch and process the parallel result.
How many bits of resolution does ADS7819P have?
The ADS7819P provides 12-bit resolution, giving 4,096 possible output codes for each converted sample. Its 800 kSPS sampling capability and single analog input make it a sampling ADC rather than a low-resolution slow ADC. Actual system accuracy can be lower when source impedance, noise, reference error, grounding, and acquisition timing are not controlled.
What package does ADS7819P use?
The ADS7819P is packaged as a 28-pin PDIP with 0.3-inch lead spacing. This through-hole format is useful for legacy boards, prototypes, and repair applications where a fine-pitch surface-mount ADC would be less convenient. Confirm pin orientation, spacing, and electrical function against the manufacturer pin-description table before assembly or board replacement.
Where can I find the ADS7819P datasheet PDF?
The ADS7819P datasheet PDF can be accessed through the linked Texas Instruments document hosted by AllDataSheet. It is titled “ADS7819 Datasheet” and describes the 12-bit, 800 kSPS CMOS analog-to-digital converter. Use the pin-description table, timing diagrams, electrical characteristics, and application information in that document when laying out or testing a circuit.
Where can I find the ADS7819P pinout?
The ADS7819P pinout is found in the pin-description table of the Texas Instruments ADS7819 datasheet. Because the device is a 28-pin PDIP, verify every connection against the numbered package drawing rather than inferring functions from adjacent devices in the same family. Pay particular attention to supply, ground, reference, analog input, conversion control, and parallel output pins.
What can replace the ADS7819P?
The closest documented family options are ADS7819U and ADS7819PB, but neither can be called a confirmed drop-in replacement for ADS7819P from the available cross-reference information. ADS7819U uses a different package, while ADS7819PB is identified as a PDIP variant whose complete electrical and timing equivalence still requires verification. Check package, pinout, interface, and timing before replacement.
Is ADS7819P the same as ADS7819U?
No. ADS7819P and ADS7819U are related 12-bit converter variants, but ADS7819P is specified in a 28-pin PDIP package and ADS7819U is a different package option. Package choice alone prevents a literal drop-in substitution. Confirm whether a PCB redesign is acceptable and verify supply, reference, timing, and logic compatibility before changing parts.
Can ADS7819PB replace ADS7819P?
ADS7819PB is the candidate most relevant to a PDIP replacement because cross-reference information identifies it as a 28-pin PDIP variant of the ADS7819 family. It should not be treated as confirmed drop-in equivalent without checking its exact pinout, electrical characteristics, timing, and lifecycle status. Use the manufacturer documentation to verify every functional connection.
What is the best cross-brand equivalent for ADS7819P?
No cross-brand equivalent can be confirmed as a true drop-in replacement for the ADS7819P from the available manufacturer and cross-reference information. A substitute would need to match the 28-pin PDIP footprint, 12-bit resolution, 800 kSPS sampling rate, parallel interface, supply arrangement, reference behavior, and timing. Request a quote for the original part while engineering evaluates any redesign.
ADS7819P vs ADS7819U - which is better for a legacy PCB?
ADS7819P is generally the more direct choice for a legacy 28-pin PDIP PCB because it is identified with that package, while ADS7819U uses another package. Choose ADS7819U only when its package and electrical configuration fit the redesign. For an existing board, footprint compatibility and exact pin functions take priority over minor family-level differences.
ADS7819P vs ADS7825U/1K - can one replace the other?
ADS7819P and ADS7825U/1K are related 12-bit ADC options, but the available comparison does not establish a pin-to-pin equivalent. ADS7819P is identified as a 28-pin PDIP single-input converter, while the ADS7825U/1K has its own package and pin arrangement. Do not substitute it without completing a full footprint, timing, interface, and electrical review.
When should I choose ADS7819P over another 12-bit ADC?
Choose ADS7819P when the design needs a 12-bit converter capable of 800 kSPS sampling, one analog input, a parallel output, and a through-hole 28-pin PDIP package. It is particularly suitable for legacy parallel-interface boards and prototypes. Choose another ADC when serial data, multiple inputs, smaller surface-mount packaging, or different electrical limits better match the system.
Is ADS7819P suitable for waveform and process measurement systems?
The ADS7819P is suitable for waveform and process measurement when the required record rate is no greater than 800 kSPS and the system can use a single analog input with a parallel data interface. Its 12-bit resolution captures 4,096 amplitude levels. A front-end amplifier, appropriate source impedance, reference conditioning, and a downstream latch or processor remain essential.
How do I request a quote and current lead time for ADS7819P?
Use the “Request a Quote” form on this page to request the current ADS7819P price, stock status, minimum order quantity, and lead time. The verified listings confirm the part and package but do not present qualifying quantity-break prices with explicit quantities. Avoid basing a BOM cost or schedule on a standalone distributor price without a current quotation.
What are the key specifications of ADS7819P that engineers should know?
The key ADS7819P specifications are 12-bit resolution, one analog input, an 800 kSPS sampling rate, a parallel digital output, and a 28-pin PDIP package. The converter uses a successive-approximation-register architecture and can represent 4,096 codes. These headline specifications define its use in high-speed embedded measurement, instrumentation, waveform capture, and legacy-control systems.

Datos de referencia de ingeniería para ADS7819P — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the ADS7819P when a design specifically requires a 12-bit, 800 kSPS, single-channel sampling ADC with a parallel output and 28-pin PDIP package. It is a strong option for legacy instrumentation, prototypes, repair boards, and embedded measurement designs that already use a parallel ADC bus. ADS7819PB is the most relevant same-family candidate to evaluate when the board requires a PDIP footprint, but its exact pin and electrical compatibility must be confirmed. ADS7819U should be considered when a package redesign is acceptable because it is identified as a different package option. ADS7825U/1K can support architecture comparisons, yet it is not a verified drop-in substitute. No cross-brand part is recommended without a completed footprint, timing, interface, and electrical-equivalence review.

Notas de diseño

Do not treat ADS7819P, ADS7819U, or ADS7819PB as interchangeable solely because they share the ADS7819 family name. Confirm the package, pin numbering, analog input connection, reference arrangement, supplies, output coding, and conversion timing against the manufacturer documentation. A package drawing alone does not establish electrical or pin-to-pin equivalence.

Keep the analog input trace short and place the associated input-network components close to the converter. Provide clean supply and reference decoupling according to the manufacturer layout guidance. These steps reduce sensitivity to switching noise and parasitic resistance while helping the converter settle to the intended input level before each sample is acquired.

Route the 12-bit parallel output in a consistent, compact manner and ensure the receiving device does not drive the bus while the ADS7819P updates its output. Establish a defined conversion-start and data-valid sequence, and account for propagation delay and setup requirements. These details are especially important when repeated 800 kSPS samples are captured into a counter or FIFO.

Design the supply and reference network so that noise and voltage tolerance remain within the device's electrical limits. Decouple the supply close to the IC and treat the reference as a precision signal node. Verify start-up, shutdown, and output behavior with the intended loading rather than assuming the nominal converter speed is sufficient for the complete acquisition chain.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance attributes are not stated in the verified product information. No assumption has been made regarding RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Búsquedas relacionadas

ADS7819P datasheet ADS7819P datasheet pdf ADS7819P pinout ADS7819P specifications ADS7819P 28-pin PDIP ADS7819P 12-bit ADC ADS7819P 800 kSPS ADS7819P equivalent ADS7819P replacement ADS7819P cross reference ADS7819P vs ADS7819U ADS7819P application circuit ADS7819P price Texas Instruments ADS7819P ADS7819P stock

Componentes & términos relacionados

Texas Instruments ADS7819P ADS7819 ADS7819U ADS7819PB ADS7825U/1K analog-to-digital converter ADC successive-approximation-register SAR ADC sampling ADC data converter analog and mixed-signal IC semiconductor 12-bit resolution 800 kSPS sampling rate parallel digital output single analog input 28-pin PDIP through-hole package industrial process monitoring waveform digitization laboratory instrumentation digital control system embedded data acquisition
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ