ADS7819P - 12-Bit 800 kSPS Single-Input ADC | Texas Instruments
料号: ADS7819P ✓ 量产中ADS7819P 概述
An ADC is a data-conversion IC that transforms a continuously varying analog voltage into a numeric code suitable for processing by a microcontroller, DSP, FPGA, or other digital controller. In the broader electronics hierarchy, the ADS7819P is an analog-to-digital converter, a data converter, an analog and mixed-signal IC, and a semiconductor. The 12-bit resolution provides 4,096 discrete codes for a full-scale conversion range, while the 800 kSPS rating defines the device as a high-speed sampling converter suitable for waveform capture, industrial monitoring, instrumentation, and embedded control.
The defining product features are its 12-bit conversion resolution, one analog input, 800 kSPS conversion rate, parallel data interface, and 28-pin PDIP package. These characteristics distinguish it from slower general-purpose ADCs and from multiplexed converters designed to scan several channels. Because the device exposes one input, designers needing multiple analog sources may need an external analog multiplexer or must accept additional switching and acquisition-time considerations.
Technically, the ADS7819P uses a sampling architecture to acquire the input voltage and then converts it through a successive-approximation process. A sample-and-hold front end captures the selected input before conversion, while the digital output presents the measured code for the next device or control system to latch. The 800 kSPS capability makes sustained waveform acquisition practical, although the complete signal chain still depends on the source impedance, analog front end, reference voltage, acquisition timing, and digital data handling. Designers should treat converter performance as a system property rather than relying on nominal resolution alone.
Typical uses include industrial process monitoring, laboratory and test instrumentation, waveform digitization, digital control loops, embedded measurement systems, and replacement of legacy PDIP ADC designs. The parallel interface can simplify connections to older parallel buses and programmable logic, although it consumes more board space and signal lines than a serial ADC. The PDIP package is also easier to inspect, probe, and replace in prototypes than a fine-pitch surface-mount package.
For a new PCB, verify the acquisition network, reference arrangement, logic levels, timing, and thermal conditions against the manufacturer datasheet. Keep the analog input path short, provide suitable decoupling at the supply and reference pins, and account for logic levels when driving the parallel output. For an existing board, confirm that the replacement footprint, pin orientation, converter timing, and output coding match the original design before substitution.
This page organizes the available ADS7819P technical facts with engineering-focused application guidance, selection criteria, and verified source links. It focuses on the practical decisions that determine whether this 12-bit, 800 kSPS, single-channel PDIP ADC belongs on a new design or serves as a sensible replacement for an older board.
直接替换替代料: ADS7819P ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADS7819P (相同外形与封装尺寸) ——差异在于 Package, Resolution, Sampling Rate.
ADS7819PB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
ADS7824PG4
✅ 直接替换联系询价
查看数据手册 →ADS7819P 最大额定值与电气特性
| Converter Type | 12-bit analog-to-digital converter |
| 分辨率 | 12 bit |
| Number of Analog Inputs | 1 input |
| 采样率 | 800 kSPS |
| 输出类型 | Parallel |
| Conversion Architecture | Successive-approximation-register |
| 封装 | 28-pin PDIP |
| 引脚数量 | 28 pins |
| 安装类型 | Through-hole |
| Pitch | 0.3 inch |
ADS7819P 28-pin pdip 引脚配置指南
ADS7819P(28-pin pdip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: ADS7819P.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADS7819P 适用于 6 应用s: Industrial Process Monitoring, Waveform Digitization, Laboratory Test Equipment, Digital Control Systems, Embedded Data Acquisition, Legacy Instrumentation Repair.
Industrial Process Monitoring
The ADS7819P fits a single-channel industrial measurement system that must digitize a conditioned sensor signal quickly and transmit the result through a parallel data bus. Its 12-bit resolution gives 4,096 amplitude levels, while the 800 kSPS sampling rate allows substantially more frequent readings than a slow instrumentation ADC. Place the converter behind a suitable signal-conditioning amplifier, keep the input path short, and use stable reference and decoupling arrangements. The parallel output is particularly useful with legacy controllers that latch conversion results directly. Single-channel operation simplifies timing, although adding an external multiplexer would require careful validation of acquisition time and settling.
推荐
Waveform Digitization
The ADS7819P can capture rapidly varying analog waveforms because its 800 kSPS conversion rate supports dense time-domain sampling. Its 12-bit output supplies 4,096 quantization levels per sample, making the device useful for monitoring repetitive signals, transient behavior, and industrial vibration or control waveforms. The system should trigger sampling coherently and latch the parallel result into a counter, FIFO, DSP, or FPGA. Input bandwidth and signal conditioning must be designed around the converter's acquisition characteristics rather than assuming the nominal sample rate alone defines usable bandwidth.
推荐
Laboratory Test Equipment
The ADS7819P is appropriate for laboratory instruments that measure one analog quantity at high update rates and retain a parallel digital interface. A 12-bit, 800 kSPS converter can support precision-oriented display, automated range measurement, and signal analysis when paired with a calibrated front end. Through-hole PDIP construction also simplifies prototype assembly and replacement compared with a fine-pitch surface-mount device. The instrument designer should account for reference accuracy, input noise, grounding, calibration, and the timing relationship between conversion start and output validity before defining measurement uncertainty.
推荐
Digital Control Systems
The ADS7819P can serve as the measurement front end of a digital control loop that converts an analog command or feedback signal into a 12-bit code. Its 800 kSPS capability supports frequent control updates, while the parallel outputs can connect directly to suitable digital control logic. Because the converter has one analog input, a multi-axis controller would need multiplexing or separate converter channels. The loop designer should include the input filter, reference tolerance, and acquisition delay when calculating control-loop timing, and should verify that output polarity and coding match the controller interface.
推荐
Embedded Data Acquisition
The ADS7819P supports embedded acquisition systems that need more sampling speed than a slow general-purpose ADC and more direct data access than a serial-interface converter can offer. Its 800 kSPS conversion rate and 12-bit resolution are well matched to recording a conditioned analog channel, while the 28-pin PDIP package remains convenient for industrial controller cards and prototypes. The downstream processor must capture the parallel bus without bus contention during conversion. Firmware and hardware should define conversion-start timing, data-valid handling, buffer depth, and scaling so no samples are overwritten or misaligned.
推荐
Legacy Instrumentation Repair
The ADS7819P is particularly useful for maintaining an existing 28-pin PDIP instrument or controller board. Its 12-bit single-channel conversion capability and parallel output align with the form of legacy data-acquisition circuits that used dedicated parallel ADCs. The through-hole package supports conventional soldering and socket-based service procedures. Before installing the device, compare the original part's pinout, supply voltage, reference configuration, conversion timing, and output coding with the ADS7819P datasheet. A visually similar package is not sufficient evidence of compatibility, so verify every net and timing condition before energizing the board.
推荐
推荐产品汇总
工程参考数据: ADS7819P ——对比、设计指导和合规信息。
选型指南
设计说明
Do not treat ADS7819P, ADS7819U, or ADS7819PB as interchangeable solely because they share the ADS7819 family name. Confirm the package, pin numbering, analog input connection, reference arrangement, supplies, output coding, and conversion timing against the manufacturer documentation. A package drawing alone does not establish electrical or pin-to-pin equivalence.
Keep the analog input trace short and place the associated input-network components close to the converter. Provide clean supply and reference decoupling according to the manufacturer layout guidance. These steps reduce sensitivity to switching noise and parasitic resistance while helping the converter settle to the intended input level before each sample is acquired.
Route the 12-bit parallel output in a consistent, compact manner and ensure the receiving device does not drive the bus while the ADS7819P updates its output. Establish a defined conversion-start and data-valid sequence, and account for propagation delay and setup requirements. These details are especially important when repeated 800 kSPS samples are captured into a counter or FIFO.
Design the supply and reference network so that noise and voltage tolerance remain within the device's electrical limits. Decouple the supply close to the IC and treat the reference as a precision signal node. Verify start-up, shutdown, and output behavior with the intended loading rather than assuming the nominal converter speed is sufficient for the complete acquisition chain.
合规信息
Compliance attributes are not stated in the verified product information. No assumption has been made regarding RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.