ADS7819P - 12-Bit 800 kSPS Single-Input ADC | Texas Instruments
MPN: ADS7819P ✓ פעילADS7819P סקירה
An ADC is a data-conversion IC that transforms a continuously varying analog voltage into a numeric code suitable for processing by a microcontroller, DSP, FPGA, or other digital controller. In the broader electronics hierarchy, the ADS7819P is an analog-to-digital converter, a data converter, an analog and mixed-signal IC, and a semiconductor. The 12-bit resolution provides 4,096 discrete codes for a full-scale conversion range, while the 800 kSPS rating defines the device as a high-speed sampling converter suitable for waveform capture, industrial monitoring, instrumentation, and embedded control.
The defining product features are its 12-bit conversion resolution, one analog input, 800 kSPS conversion rate, parallel data interface, and 28-pin PDIP package. These characteristics distinguish it from slower general-purpose ADCs and from multiplexed converters designed to scan several channels. Because the device exposes one input, designers needing multiple analog sources may need an external analog multiplexer or must accept additional switching and acquisition-time considerations.
Technically, the ADS7819P uses a sampling architecture to acquire the input voltage and then converts it through a successive-approximation process. A sample-and-hold front end captures the selected input before conversion, while the digital output presents the measured code for the next device or control system to latch. The 800 kSPS capability makes sustained waveform acquisition practical, although the complete signal chain still depends on the source impedance, analog front end, reference voltage, acquisition timing, and digital data handling. Designers should treat converter performance as a system property rather than relying on nominal resolution alone.
Typical uses include industrial process monitoring, laboratory and test instrumentation, waveform digitization, digital control loops, embedded measurement systems, and replacement of legacy PDIP ADC designs. The parallel interface can simplify connections to older parallel buses and programmable logic, although it consumes more board space and signal lines than a serial ADC. The PDIP package is also easier to inspect, probe, and replace in prototypes than a fine-pitch surface-mount package.
For a new PCB, verify the acquisition network, reference arrangement, logic levels, timing, and thermal conditions against the manufacturer datasheet. Keep the analog input path short, provide suitable decoupling at the supply and reference pins, and account for logic levels when driving the parallel output. For an existing board, confirm that the replacement footprint, pin orientation, converter timing, and output coding match the original design before substitution.
This page organizes the available ADS7819P technical facts with engineering-focused application guidance, selection criteria, and verified source links. It focuses on the practical decisions that determine whether this 12-bit, 800 kSPS, single-channel PDIP ADC belongs on a new design or serves as a sensible replacement for an older board.
חלופות תחליף ישיר עבור ADS7819P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADS7819P (אותו גורם צורה וטביעת רגל) — שונים ב Package, Resolution, Sampling Rate.
ADS7819PB
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ADS7824PG4
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS7819P דירוגים מרביים ומאפיינים חשמליים
| Converter Type | 12-bit analog-to-digital converter |
| רזולוציה | 12 bit |
| Number of Analog Inputs | 1 input |
| קצב דגימה | 800 kSPS |
| סוג פלט | Parallel |
| Conversion Architecture | Successive-approximation-register |
| מארז | 28-pin PDIP |
| מספר פינים | 28 pins |
| סוג הרכבה | Through-hole |
| Pitch | 0.3 inch |
מדריך תצורת פינים של ADS7819P 28-pin pdip
תצורת פינים עבור ADS7819P (מארזת 28-pin pdip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור ADS7819P.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADS7819P מתאים עבור 6 יישוםs: Industrial Process Monitoring, Waveform Digitization, Laboratory Test Equipment, Digital Control Systems, Embedded Data Acquisition, Legacy Instrumentation Repair.
Industrial Process Monitoring
The ADS7819P fits a single-channel industrial measurement system that must digitize a conditioned sensor signal quickly and transmit the result through a parallel data bus. Its 12-bit resolution gives 4,096 amplitude levels, while the 800 kSPS sampling rate allows substantially more frequent readings than a slow instrumentation ADC. Place the converter behind a suitable signal-conditioning amplifier, keep the input path short, and use stable reference and decoupling arrangements. The parallel output is particularly useful with legacy controllers that latch conversion results directly. Single-channel operation simplifies timing, although adding an external multiplexer would require careful validation of acquisition time and settling.
מומלץ
Waveform Digitization
The ADS7819P can capture rapidly varying analog waveforms because its 800 kSPS conversion rate supports dense time-domain sampling. Its 12-bit output supplies 4,096 quantization levels per sample, making the device useful for monitoring repetitive signals, transient behavior, and industrial vibration or control waveforms. The system should trigger sampling coherently and latch the parallel result into a counter, FIFO, DSP, or FPGA. Input bandwidth and signal conditioning must be designed around the converter's acquisition characteristics rather than assuming the nominal sample rate alone defines usable bandwidth.
מומלץ
Laboratory Test Equipment
The ADS7819P is appropriate for laboratory instruments that measure one analog quantity at high update rates and retain a parallel digital interface. A 12-bit, 800 kSPS converter can support precision-oriented display, automated range measurement, and signal analysis when paired with a calibrated front end. Through-hole PDIP construction also simplifies prototype assembly and replacement compared with a fine-pitch surface-mount device. The instrument designer should account for reference accuracy, input noise, grounding, calibration, and the timing relationship between conversion start and output validity before defining measurement uncertainty.
מומלץ
Digital Control Systems
The ADS7819P can serve as the measurement front end of a digital control loop that converts an analog command or feedback signal into a 12-bit code. Its 800 kSPS capability supports frequent control updates, while the parallel outputs can connect directly to suitable digital control logic. Because the converter has one analog input, a multi-axis controller would need multiplexing or separate converter channels. The loop designer should include the input filter, reference tolerance, and acquisition delay when calculating control-loop timing, and should verify that output polarity and coding match the controller interface.
מומלץ
Embedded Data Acquisition
The ADS7819P supports embedded acquisition systems that need more sampling speed than a slow general-purpose ADC and more direct data access than a serial-interface converter can offer. Its 800 kSPS conversion rate and 12-bit resolution are well matched to recording a conditioned analog channel, while the 28-pin PDIP package remains convenient for industrial controller cards and prototypes. The downstream processor must capture the parallel bus without bus contention during conversion. Firmware and hardware should define conversion-start timing, data-valid handling, buffer depth, and scaling so no samples are overwritten or misaligned.
מומלץ
Legacy Instrumentation Repair
The ADS7819P is particularly useful for maintaining an existing 28-pin PDIP instrument or controller board. Its 12-bit single-channel conversion capability and parallel output align with the form of legacy data-acquisition circuits that used dedicated parallel ADCs. The through-hole package supports conventional soldering and socket-based service procedures. Before installing the device, compare the original part's pinout, supply voltage, reference configuration, conversion timing, and output coding with the ADS7819P datasheet. A visually similar package is not sufficient evidence of compatibility, so verify every net and timing condition before energizing the board.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADS7819P — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
הערות תכנון
Do not treat ADS7819P, ADS7819U, or ADS7819PB as interchangeable solely because they share the ADS7819 family name. Confirm the package, pin numbering, analog input connection, reference arrangement, supplies, output coding, and conversion timing against the manufacturer documentation. A package drawing alone does not establish electrical or pin-to-pin equivalence.
Keep the analog input trace short and place the associated input-network components close to the converter. Provide clean supply and reference decoupling according to the manufacturer layout guidance. These steps reduce sensitivity to switching noise and parasitic resistance while helping the converter settle to the intended input level before each sample is acquired.
Route the 12-bit parallel output in a consistent, compact manner and ensure the receiving device does not drive the bus while the ADS7819P updates its output. Establish a defined conversion-start and data-valid sequence, and account for propagation delay and setup requirements. These details are especially important when repeated 800 kSPS samples are captured into a counter or FIFO.
Design the supply and reference network so that noise and voltage tolerance remain within the device's electrical limits. Decouple the supply close to the IC and treat the reference as a precision signal node. Verify start-up, shutdown, and output behavior with the intended loading rather than assuming the nominal converter speed is sufficient for the complete acquisition chain.
מידע על תאימות
Compliance attributes are not stated in the verified product information. No assumption has been made regarding RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.