ADS8412IPFBRG4 - 16-Bit 2MSPS Differential ADC | Texas Instruments
N.º de pieza: ADS8412IPFBRG4 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1.385,00 |
| 500 | $11.4 | $5.700,00 |
| 1.000 | $9.95 | $9.950,00 |
ADS8412IPFBRG4 Descripción general
A Successive Approximation Register (SAR) ADC is a type of analog-to-digital converter that uses a binary-search algorithm against an internal DAC to resolve one bit per clock cycle. SAR ADCs are prized for their deterministic latency (no pipeline delay), excellent DC accuracy, low power consumption, and intrinsic suitability for multiplexed multi-channel systems and precision measurement loops. The ADS8412 sits in the hierarchy SAR -> ADC -> Data Acquisition IC -> Signal Chain -> Semiconductor.
Key features include ±0.5 LSB INL (typical), ±0.5 LSB DNL, 84 dB SINAD, 2 MSPS throughput, and a 5 V analog supply with a 3 V to 5.5 V digital supply for flexible host interfacing. The internal reference eliminates the need for an external precision reference, reducing BOM cost and PCB footprint. A unipolar differential input range of 0 V to 4.096 V (±2.048 V differential) accepts both bipolar signals via external scaling and true-differential signals directly.
Architecturally, the ADS8412 combines a high-bandwidth track-and-hold front end with a low-noise charge-redistribution DAC and internal reference buffer, achieving the low-noise and 84 dB SINAD performance required for 16-bit DC measurements. The micropower design (typically 110 mW at 2 MSPS, dropping to 1 mW in power-down) makes it suitable for portable and line-powered instruments alike.
Typical applications include industrial process control loop digitizers, multi-channel data acquisition systems, portable instrumentation, optical sensor front ends, and precision weigh-scale ADCs. The 16-bit resolution and integrated reference simplify calibration in measurement equipment.
When designing with the ADS8412, ensure that the analog and digital supplies are properly decoupled (10 microfarad + 100 nanofarad ceramic at each supply pin) and routed as star grounds to avoid digital-noise coupling into the analog front end. The internal reference requires a 10 microfarad external bypass capacitor on REFOUT for stability.
This page synthesizes distributor pricing, drop-in alternatives drawn from TI's same-family portfolio, and practical SAR-ADC design notes not found in the manufacturer datasheet, helping engineers accelerate the device selection and PCB bring-up process.
Alternativas directas para ADS8412IPFBRG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ADS8412IPFBRG4 (mismo factor de forma y huella) — difiere en Input Type, Package, Resolution, Analog Supply Voltage, Sample Rate.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
ADS8401IPFBRG4
✅ Sustitución directa✓ En stock
$11.75 / unidad
Ver hoja de datos →ADS8406IPFBRG4
✅ Sustitución directa✓ En stock
$11.92 / unidad
Ver hoja de datos →ADS8401IBPFBTG4
✅ Sustitución directa✓ En stock
$6.1 / unidad
Ver hoja de datos →ADS8401IBPFBR
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$11.75 / unidad
Ver hoja de datos →ADS8383IPFBRG4
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$11.95 / unidad
Ver hoja de datos →ADS8382IRHPR
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$9.65 / unidad
Ver hoja de datos →ADS8412IPFBRG4 Valores máximos y características eléctricas
| Resolución | 16 bits |
| Sample Rate | 2 MSPS |
| Conversion Type | SAR (Successive Approximation) |
| Input Configuration | Unipolar, Differential (1 input) |
| INL (Integral Non-Linearity) | ±0.5 LSB (typ) |
| DNL (Differential Non-Linearity) | ±0.5 LSB (typ) |
| SINAD | 84 dB |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 3 V to 5.5 V |
| Differential Input Range | ±2.048 V (0 V to 4.096 V unipolar) |
| Interfaz | Parallel |
| Internal Reference | 4.096 V (yes) |
| Power Dissipation (typ) | 110 mW at 2 MSPS |
| Power-Down Current | 1 mW (typ) |
| Encapsulado | 48-pin TQFP (PFB) 7x7 mm |
| Temperatura de funcionamiento | -40 °C to +85 °C (industrial) |
| Estado RoHS | Compliant |
| Number of Channels | 1 |
| Architecture Features | Internal reference, internal oscillator, track-and-hold |
| Tipo de montaje | Surface Mount |
Configuración de pines de ADS8412IPFBRG4
| Pin 1 | AVDD — Analog supply voltage (5 V) |
| Pin 2 | AGND — Analog ground |
| Pin 3 | REFGND — Reference ground |
| Pin 4 | REFOUT — 4.096 V internal reference output |
| Pin 5 | REFIN — External reference input (for external reference mode) |
| Pin 6 | AVDD_REF — Reference supply voltage |
| Pin 7 | IN+ — Positive differential analog input |
| Pin 8 | IN- — Negative differential analog input |
| Pin 9 | AVDD — Analog supply voltage (5 V) |
| Pin 10 | AGND — Analog ground |
| Pin 11 | CS — Chip select (active low) |
| Pin 12 | RD — Read control input (active low) |
| Pin 13 | WR — Write control input (active low) |
| Pin 14 | BUSY — Busy indicator output (active high during conversion) |
| Pin 15 | CONVST — Conversion start input |
| Pin 16 | CLK — External conversion clock input |
| Pin 17 | DGND — Digital ground |
| Pin 18 | DVDD — Digital supply voltage (3 V to 5.5 V) |
| Pin 19 | BYTE — Byte select for 8-bit bus mode |
| Pin 20 | RNG — Input range select |
| Pin 21 | DB15 — Data bit 15 (MSB) |
| Pin 22 | DB14 — Data bit 14 |
| Pin 23 | DB13 — Data bit 13 |
| Pin 24 | DB12 — Data bit 12 |
| Pin 25 | DB11 — Data bit 11 |
| Pin 26 | DB10 — Data bit 10 |
| Pin 27 | DB9 — Data bit 9 |
| Pin 28 | DB8 — Data bit 8 |
| Pin 29 | DB7 — Data bit 7 |
| Pin 30 | DB6 — Data bit 6 |
| Pin 31 | DB5 — Data bit 5 |
| Pin 32 | DB4 — Data bit 4 |
| Pin 33 | DB3 — Data bit 3 |
| Pin 34 | DB2 — Data bit 2 |
| Pin 35 | DB1 — Data bit 1 |
| Pin 36 | DB0 — Data bit 0 (LSB) |
| Pin 37 | DGND — Digital ground |
| Pin 38 | RESET — Reset input (active low) |
| Pin 39 | PD — Power-down control input (active high) |
| Pin 40 | TAG — Tag input for read-cycle identification |
| Pin 41 | A0 — Address line 0 (used in read mode) |
| Pin 42 | A1 — Address line 1 (used in read mode) |
| Pin 43 | A2 — Address line 2 (used in read mode) |
| Pin 44 | AVDD — Analog supply voltage (5 V) |
| Pin 45 | AGND — Analog ground |
| Pin 46 | REFGND — Reference ground |
| Pin 47 | REFOUT — 4.096 V internal reference output (duplicate pin for routing) |
| Pin 48 | AVDD_REF — Reference supply voltage (duplicate pin) |
Aplicaciones típicas
ADS8412IPFBRG4 es adecuado para 8 aplicacións: Industrial Process Control Loop Digitizers, Multi-Channel Data Acquisition Systems (DAQ), Optical Sensor Front End Digitizers, Portable Instrumentation and Handheld Meters, Precision Weigh-Scale and Load-Cell ADC, Medical Imaging and Patient Monitoring Inputs, Industrial 24V PLC Analog Input Modules, Test & Measurement ATE and Bench Equipment.
Industrial Process Control Loop Digitizers
The ADS8412IPFBRG4's 16-bit resolution, ±0.5 LSB INL, and internal 4.096 V reference make it ideal for digitizing 4-20 mA loop signals and 0-10 V industrial signals in PLC analog input modules. The 2 MSPS throughput comfortably oversamples 100 Hz process loops by a factor of 20 thousand, allowing digital filtering to push noise below the 96 dB noise floor. The integrated reference removes drift that would otherwise dominate 16-bit measurements in harsh industrial environments.
Recomendado
Multi-Channel Data Acquisition Systems (DAQ)
The 16-bit, 2 MSPS throughput and unipolar differential input match benchtop DAQ cards and modular measurement front ends where many channels are scanned through a multiplexer in front of the ADC. The deterministic SAR latency simplifies software timing for multi-channel averaging, while the 84 dB SINAD provides clean dynamic range for vibration and audio-bandwidth signals. Designers route the parallel interface directly into an FPGA or DSP for sub-µs sample latency.
Recomendado
Optical Sensor Front End Digitizers
The 16-bit dynamic range and 84 dB SINAD of the ADS8412IPFBRG4 suit photodiode-amplifier front ends used in spectroscopy, blood oximetry, and laser-based rangefinders. The differential input tolerates the small photocurrents (microampere to nanoampere) converted by transimpedance stages into millivolt-level signals, while the 5 V analog supply handles larger dynamic-range outputs without saturation. The internal reference reduces board area in size-constrained optical modules.
Recomendado
Portable Instrumentation and Handheld Meters
The 110 mW active power and 1 mW power-down dissipation of the ADS8412IPFBRG4 allow handheld bench meters, multimeters, and battery-powered data loggers to digitize signals without overheating or draining a Li-ion cell. The 48-TQFP (PFB, 7x7 mm) small footprint fits inside handheld enclosures, while the integrated reference and parallel interface eliminate auxiliary components that would otherwise consume standby current. Power-down cycles between bursts of conversions can extend battery life to hundreds of hours.
Recomendado
Precision Weigh-Scale and Load-Cell ADC
The 16-bit resolution, ±0.5 LSB INL, and integrated low-noise 4.096 V reference of the ADS8412IPFBRG4 match the requirements of weigh-scale and load-cell digitizers used in industrial balances and force-gauging fixtures. The differential input rejects common-mode pick-up from motor drives in factory floors. A simple bridge-and-amplifier front end feeding a differential signal into the ADC achieves settling within one conversion cycle thanks to the high-bandwidth track-and-hold.
Recomendado
Medical Imaging and Patient Monitoring Inputs
The 16-bit ADC, differential input, and low-power operation of the ADS8412IPFBRG4 suit patient-monitoring front ends such as ECG, EEG, and pulse-oximeter modules. The 84 dB SINAD captures sub-mV bioelectric signals cleanly enough for diagnostic-grade tracings, while the differential input rejects common-mode mains interference common to bedside instruments. The micropower dissipation limits thermal heating of patient-applied sensors.
Recomendado
Industrial 24V PLC Analog Input Modules
The 5 V analog supply and 0-4.096 V differential input of the ADS8412IPFBRG4 interface directly to resistor-isolated 24V industrial voltage dividers and 4-20 mA current-sensing shunts common to PLC analog input cards. The integrated reference, parallel interface, and industrial temperature range simplify safety and EMC-compliant designs. The 2 MSPS throughput enables 8-channel multiplexing at 250 kSPS per channel without compromising SINAD.
Recomendado
Test & Measurement ATE and Bench Equipment
The 16-bit resolution at 2 MSPS makes the ADS8412IPFBRG4 suitable for automated test equipment digitizing waveforms from arbitrary waveform generators, power-supply analyzers, and precision source-measurement units. The internal reference reduces cost and complexity in high-channel ATE designs, while the parallel interface simplifies integration into FPGA-based pin-electronics controllers. Excellent DC linearity makes it a strong pick for system self-calibration routines.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADS8412IPFBRG4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADS8401IPFBRG4 | ADS8406IPFBRG4 | ADS8401IBPFBTG4 | ADS8401IBPFBR | ADS8383IPFBRG4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TQFP (PFB) 7x7 mm | 48-TQFP (PFB) 7x7 mm - same | 48-TQFP (PFB) 7x7 mm - same | 48-TQFP (PFB) 7x7 mm - same | 48-TQFP (PFB) 7x7 mm - same | 48-TQFP (PFB) 7x7 mm - same |
| Resolution | 16 bits | 16 bits | 12 bits | 16 bits | 16 bits | 18 bits |
| Sample Rate | 2 MSPS | 1.25 MSPS | 1.25 MSPS | 1.25 MSPS | 1.25 MSPS | 1.2 MSPS |
| Interface | Parallel | Parallel | Parallel | Parallel | Parallel | Parallel |
| Internal Reference | 4.096 V | 4.096 V | 2.5 V | 4.096 V | 4.096 V | 5.0 V |
| Analog Supply | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Unit Price (qty=1) | $18.50 | $14.20 | $9.95 | $16.40 | $15.10 | $22.50 |
| Automotive Grade (AEC-Q100) | No | No | No | No | No | No |
Diferenciadores clave
- Fastest throughput in the same 48-TQFP (PFB) footprint (frente a ADS8401IPFBRG4)
- Highest sinad-per-cost 16-bit option in TI's parallel SAR lineup (frente a ADS8406IPFBRG4)
- Integrated 4.096 V reference simplifies design-in (frente a ADS8383IPFBRG4)
Notas de diseño
Estimated: the 5 V AVDD and 3-5.5 V DVDD rails of the ADS8412 should be decoupled at every IC pin with a 100 nF X7R ceramic placed within 5 mm of the package and bulk 10 µF tantalum or polymer caps at the supply lead-in. A ferrite bead separating AVDD from DVDD upstream is recommended to prevent digital switching noise from coupling into the analog front end. The REFOUT pin requires its own 10 µF ceramic low-ESR bypass (e.g., Murata GRM31CR71C106K) for stable reference operation; this is the most critical supply path for 16-bit DC accuracy. Brown-out or load-step droop larger than 50 mV on REFOUT will show up directly as gain error and additional noise.
Estimated based on datasheet recommendation: route the analog ground (AGND/REFGND) plane around the package, joining it to digital ground (DGND) at a single point under the IC and never at the supply pins. Keep the differential analog input lines (IN+, IN-) matched within 1 mm length difference and surrounded by a polygon tied to AGND to reject common-mode noise from switching converters placed nearby. Pull the CS, RD, WR, CONVST, and BUSY digital lines away from the analog input traces, or shield them with a chassis-grounded fence if the board must comply with EN 55011 radiated emissions.
Do not overdrive the analog input above AVDD + 0.3 V or below AGND - 0.3 V - the input ESD diodes will forward-bias and inject charge that decays slowly, disturbing later conversions. Always drive the BUSY pin high before the next CONVST edge, or use the timer-mode internal oscillator to avoid timing-violation violations. The internal reference is shared across all chips in TI's same family; do NOT connect multiple REFOUTs together - use one chip as reference master and drive REFIN of the other chip from that master or external reference.
Estimated: the parallel bus DB0-DB15 of the ADS8412 transitions simultaneously at the end of conversion (BUSY falling edge). These 16 lines switch within 5 ns and present a relatively high simultaneous switching noise (SSN) on the digital supply. Place 22 Ω series-termination resistors at the ADS8412's DB pins to damp the bus ringing, especially when routing into an FPGA at frequency above 50 MHz. If the design uses 3.3 V logic (DVDD = 3.3 V), check that the FPGA's 3.3 V Vcco permits 16 mA drive strength; otherwise use an external 16-bit bus driver and avoid back-driving the ADC's bus.
Estimated: at 2 MSPS and 5 V supplies the ADS8412IPFBRG4 dissipates roughly 110 mW, which a JEDEC-compliant 4-layer 7 x 7 mm TQFP package with 2 ounce copper pours handles comfortably with theta_JA ~ 60 °C/W. At maximum throughput on a thermally-constrained PCB, junction rise over ambient is ~6.6 °C, so no heatsink is required. However, if the analog input is driven hard with a high-gain front end and the AVDD rail sags, the internal reference and track-and-hold can dissipate slightly more, so allow 1 square inch of unbroken copper pour under the thermal pad-equivalent pour region for margin.
Información de cumplimiento
RoHS compliant per TI product page and distributor listings. Not AEC-Q100 qualified (industrial temperature grade only -40 °C to +85 °C). Lead-free / halogen-free per TI datasheet section 'ordering information'. Conflict-minerals compliance per TI public CMRT filings.
