Microchip Technology

ATMEGA32M1-MU - 8-Bit AVR MCU, 16MHz, 32KB Flash

N.º de pieza: ATMEGA32M1-MU ✓ Activo
3.3 V to 5 V Vdss 32-VQFN, 5 x 5 mm Package 16 MHz Speed 32 KB (16K x 16 words) Memory
MOQ: 1 |

ATMEGA32M1-MU Descripción general

The Microchip Technology ATMEGA32M1-MU is an 8-bit AVR RISC microcontroller with a 16 MHz maximum clock, 32 KB Flash memory, 1 KB EEPROM, 2 KB SRAM, and 27 general-purpose I/O lines, housed in a 32-VQFN package. The ATMEGA32M1-MU is designed for compact embedded-control systems that require flexible digital I/O, serial communication, analog measurement, and programmable timing without the overhead of a higher-bit microcontroller architecture.

An 8-bit microcontroller is a programmable integrated circuit built around an 8-bit data path and a reduced-instruction-set computer architecture. Within the embedded-control hierarchy, the ATMEGA32M1 combines a CPU core, nonvolatile program memory, data EEPROM, SRAM, peripherals, and GPIO in one device. Its architecture falls within the broader categories of embedded processor, microcontroller, and semiconductor, making it suitable for compact control, sensing, communication, and industrial automation products.

Key device characteristics include 32 KB of ISP Flash with read-while-write capability, 1 KB of EEPROM, and 2 KB of SRAM. The device provides 27 general-purpose I/O lines and 32 general-purpose working registers. Its memory organization allows application firmware, configuration data, and working variables to coexist on the same chip. The 32-VQFN 5 x 5 mm package also supports surface-mount assembly in space-constrained equipment.

The ATMEGA32M1 platform integrates communication and control peripherals with an AVR instruction set and Harvard-style memory architecture. Programmable timers support event counting, pulse generation, and periodic control, while serial interfaces support communication with sensors, transceivers, displays, and host systems. The exact peripheral configuration, operating voltage limits, clock options, and electrical timing values should be confirmed in the manufacturer datasheet before final schematic and firmware design.

Typical applications include industrial control modules, compact motor controllers, building and HVAC equipment, low-cost instrumentation, communications equipment, consumer accessories, and low-power embedded nodes. Its 2 KB SRAM is suitable for moderate working sets, while the 32 KB Flash capacity accommodates substantially more application code than the smallest 8-bit devices. External serial EEPROM or Flash should be considered when a project requires additional nonvolatile storage.

Place the device close to its decoupling network, keep high-current switching loops away from sensitive analog and communication traces, and provide continuous copper beneath the exposed pad where the package construction requires thermal coupling. Confirm the exposed-pad connection, programming access, reset circuit, clock arrangement, and pin multiplexing against the manufacturer pin-description table before layout release.

This product page combines the manufacturer product description, distributor technical records, package and memory details, replacement guidance, and practical embedded-design considerations. It is intended to help engineers evaluate the ATMEGA32M1-MU, compare pin-compatible family options, and prepare a compact, low-power 8-bit control design with fewer component-level surprises.

Alternativas directas para ATMEGA32M1-MU — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con ATMEGA32M1-MU (mismo factor de forma y huella) — difiere en Package, SRAM, Flash Memory, EEPROM, Core Architecture.

Microchip Technology
Package: 32-QFN (7x7 mm), exposed pad
SRAM: 1 KB
EEPROM: 512 B
Comparar con ATMEGA32M1-MU →
Microchip Technology
Package: 32-VQFN (5x5 mm)
SRAM: 512 B
Flash Memory: 16 KB (8K x 16) ISP
Comparar con ATMEGA32M1-MU →
Microchip Technology
Core Architecture: 8-bit AVR RISC
Comparar con ATMEGA32M1-MU →
Microchip Technology
Package: 32-VQFN Exposed Pad (7x7 mm)
SRAM: 4 KB
Flash Memory: 64 KB (32K x 16) ISP Flash, read-while-write
Comparar con ATMEGA32M1-MU →
Microchip Technology
Package: 32-VQFN (5x5 mm), exposed pad
SRAM: 4 KB
EEPROM: 2 KB
Comparar con ATMEGA32M1-MU →

ATMEGA32M1-15MU

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 32-VQFN (5 x 5 mm)
Same 32 KB Flash and 32-VQFN footprint; ordering suffix changes the identified electrical or temperature configuration by up to 5% or 10%, subject to ordering-table confirmation

📋 Alternativa de referencia (no en el catálogo)

ATMEGA32M1-15MZ

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 32-VQFN (5 x 5 mm)
8-bit AVR RISC · 32 KB (16K x 16) ISP Flash · 1 KB · 2 KB · 16 MHz · 27 general purpose I/O lines · 131 instructions, most single-cycle · Internal

Consulte el precio

Ver hoja de datos →

ATMEGA64M1-MU

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 32-VQFN (5 x 5 mm)
8-bit AVR RISC · 64 KB (32K x 16) Flash · ISP, read-while-write · 2 KB · 4 KB · 16 MHz · 27 lines · 32 x 8-bit general purpose

Consulte el precio

Ver hoja de datos →

ATMEGA64M1-15MZ

✅ Sustitución directa
Microchip Technology
📦 32-VQFN (5 x 5 mm)
8-bit AVR RISC · 64 KB (32K x 16) ISP Flash, read-while-write · 2 KB · 4 KB · 16 MHz · 2.7 V to 5.5 V · 27 lines · 32 x 8-bit general purpose

Consulte el precio

Ver hoja de datos →

ATMEGA16U2-MU

✅ Sustitución directa
Microchip Technology
📦 32-VQFN with exposed pad
AVR 8-bit RISC · 16 MHz · 16 KB (8K x 16) ISP · 512 B · 512 B · 2.7 V to 5.5 V · 22 · USB 2.0 full-speed device (12 Mbps)

Consulte el precio

Ver hoja de datos →

ATMEGA32M1-MU Valores máximos y características eléctricas

Product Type 8-bit AVR RISC microcontroller (dimensionless classification)
Frecuencia de reloj máxima 16 MHz
Flash Memory 32 KB (16K x 16 words)
EEPROM Memory 1 KB
SRAM 2 KB
General-Purpose I/O Lines 27 lines
General-Purpose Working Registers 32 registers
Tensión de alimentación 3.3 V to 5 V
Encapsulado 32-VQFN, 5 x 5 mm
Tipo de montaje Surface mount
Program Memory Type ISP Flash with read-while-write (dimensionless)
Architecture AVR RISC instruction set (dimensionless)
I/O Voltage 3.3 V to 5 V

Guía de configuración de pines de ATMEGA32M1-MU 32-vqfn, 5 x 5 mm

Configuración de pines para ATMEGA32M1-MU (encapsulado 32-vqfn, 5 x 5 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 32-vqfn, 5 x 5 mm para ATMEGA32M1-MU

No hay datos detallados de patillaje disponibles para ATMEGA32M1-MU.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ATMEGA32M1-MU es adecuado para 6 aplicacións: Compact Industrial Control Module, Building and HVAC Equipment, Motor and Timing Controller, Serial Sensor and IoT Node, Programmable Logic and Relay Controller, Low-Cost Data Acquisition Front End.

🏭

Compact Industrial Control Module

The ATMEGA32M1-MU fits compact industrial controllers that coordinate digital inputs, outputs, timers, and serial sensors within a 32-VQFN 5 x 5 mm footprint. Its 16 MHz AVR core provides responsive control-loop capability, while 32 KB of ISP Flash gives application firmware room for state-machine logic, communication routines, and configuration handling. The 27 GPIO lines can connect switches, status indicators, relays, and discrete sensors without requiring a large external GPIO expander. Keep sensitive switching nodes separated from communication and analog traces, and confirm the device temperature range against the enclosure environment.

🏭

Building and HVAC Equipment

ATMEGA32M1-MU can serve as the central controller in a compact HVAC or building-automation module because it combines 27 GPIO lines, timers, 1 KB EEPROM, and 2 KB SRAM for sensor inputs, actuator commands, schedules, and operating-state tracking. Its 3.3 V to 5 V supply compatibility allows integration with common control boards, while the 32-VQFN package reduces board area in enclosed controllers. EEPROM can retain calibration or configuration values, although the endurance and write-time limits should be checked in the manufacturer electrical characteristics. Firmware should include watchdog recovery and safe actuator states after reset or power loss.

🔧

Motor and Timing Controller

The ATMEGA32M1-MU is appropriate for small motor, valve, or precision-timing modules where a 16 MHz AVR controller must coordinate pulse inputs, output switching, and supervisory logic. Two KB of SRAM supports modest task stacks and working variables, while the 32 KB Flash capacity accommodates closed-loop routines and diagnostic functions. Programmable timers can generate the required timing sequence, and GPIO pins can capture switch or sensor events. External transistors, drivers, current sensing, and protection components remain necessary because the MCU does not directly provide power-stage functionality. Validate timing margins under worst-case interrupt load and account for switching-node electrical noise.

🧩

Serial Sensor and IoT Node

ATMEGA32M1-MU works well in a compact sensor node that must acquire digital measurements, run local filtering, and forward information through a serial interface. Its 27 GPIO lines provide connections for sensors and status signals, while 1 KB of EEPROM can retain calibration values or network parameters. At 16 MHz, the AVR core can service multiple interrupt-driven peripheral routines without occupying excessive board area. A communications transceiver remains external to the MCU. For a battery-operated design, calculate the complete sleep and wake current budget, disable unused peripherals, and use the manufacturer low-power modes rather than estimating current solely from the nominal clock speed.

🔧

Programmable Logic and Relay Controller

The ATMEGA32M1-MU can implement a compact programmable relay or digital-output controller where firmware must coordinate multiple outputs, validate input sequences, and maintain safe states. Its 32 KB Flash provides space for configuration tables, event logging, and field-upgrade logic, while 2 KB of SRAM supports queues and state variables. The 32-VQFN 5 x 5 mm package is useful in densely populated control products. Use the pin-description table to select pins with suitable alternate functions, and design the high-current interface so relay-coil transients and ground bounce cannot corrupt MCU supply or control signals.

📺

Low-Cost Data Acquisition Front End

ATMEGA32M1-MU is suitable for a compact instrumentation front end that gathers digital sensor states, performs basic filtering or thresholding, and transfers results to a host. The 16 MHz AVR core supports responsive peripheral servicing, and 27 GPIO lines can connect multiplexed digital channels, status signals, and a communications interface. Two KB of SRAM is adequate for modest sample buffers but not for large waveform capture, so applications requiring extended storage should add external memory or select a higher-memory family member. Design analog front-end circuitry separately and maintain grounding and return-current separation between sensing and switching sections.

What are the key specifications of ATMEGA32M1-MU that engineers should know?
The ATMEGA32M1-MU is an 8-bit AVR RISC microcontroller rated for operation at up to 16 MHz with 32 KB of ISP Flash, 1 KB of EEPROM, 2 KB of SRAM, and 27 general-purpose I/O lines. According to the Microchip Technology ATmega32M1 product page, the device also provides 32 general-purpose working registers. It is packaged in a 32-VQFN 5 x 5 mm surface-mount package and supports a 3.3 V to 5 V supply range, making it appropriate for compact embedded-control equipment.
Where can I download the ATMEGA32M1-MU datasheet PDF?
The official ATMEGA32M1-MU technical information is available through the Microchip Technology ATmega32M1 product page, with a third-party PDF copy also indexed at DiGi Electronics. The manufacturer page is the preferred starting point because it links the current device documentation and product support resources. The manufacturer ATmega32M1 product page identifies the device as an AVR RISC microcontroller with 32 KB ISP Flash, 1 KB EEPROM, 2 KB SRAM, 27 I/O lines, and 32 working registers.
Where can I find the ATMEGA32M1-MU pinout and package information?
The ATMEGA32M1-MU uses a 32-VQFN 5 x 5 mm package, and its authoritative pin assignments, exposed-pad connection, and alternate-function details must be taken from the Microchip ATmega32M1 pin-description table. Use that table when assigning the 27 general-purpose I/O lines and checking peripheral multiplexing. The exposed thermal pad may require a dedicated PCB connection and thermal-coupling pattern, so verify its treatment against the package drawing before fabrication.
What is the ATMEGA32M1-MU suitable for?
The ATMEGA32M1-MU is suitable for compact embedded systems that need an 8-bit AVR controller, 32 KB of program Flash, 2 KB of SRAM, and 27 GPIO lines. These resources fit timer-based control, communication-enabled sensor nodes, building equipment, industrial modules, and compact consumer accessories. Its 32-VQFN 5 x 5 mm package also saves board area, while its 3.3 V to 5 V range supports common embedded supply systems.
Is the ATMEGA32M1-MU the same as ATMEGA32M1-15MZ?
No. The ATMEGA32M1-MU and ATMEGA32M1-15MZ are ordering variants of the ATmega32M1 family, but their suffix and ordering codes can identify different voltage, temperature, or packaging arrangements. The ATMEGA32M1-MU is listed in a 32-VQFN 5 x 5 mm package, while the ATMEGA32M1-15MZ appears in a family comparison against ATMEGA64M1-15MZ. Check the complete ordering information and package drawing before treating one as a substitute.
What can replace the ATMEGA32M1-MU on the same PCB?
The closest replacements are qualified members of the ATmega32M1 and ATmega64M1 families that use the same 32-VQFN footprint and compatible pin arrangement. Candidates include ATMEGA32M1-15MU, ATMEGA32M1-15MZ, ATMEGA64M1-MU, and ATMEGA64M1-15MZ, subject to final operating-voltage, temperature, memory, and peripheral checks. ATMEGA16U2-MU may use the same general 32-QFN format, but its USB and memory architecture differ, so firmware and peripheral compatibility must be reviewed rather than assumed.
ATMEGA32M1-MU vs ATMEGA64M1-MU: which is better for more features?
Choose ATMEGA64M1-MU when firmware growth, larger data sets, or additional application functions make 32 KB of Flash and 2 KB of SRAM insufficient. The ATMEGA32M1-MU provides 32 KB Flash and 2 KB SRAM, whereas the ATMEGA64M1 family provides 64 KB Flash according to the family naming and comparison records. Both belong to the same AVR RISC product family and can use the 32-VQFN package, but SRAM size, peripheral configuration, clock details, and software resource requirements should be compared before replacement.
When should I choose the ATMEGA32M1-MU over the ATMEGA32M1-15MU?
Choose ATMEGA32M1-MU when the exact 32-VQFN ordering variant matches the required supply, temperature, and production configuration. Choose ATMEGA32M1-15MU when its identified electrical and temperature range better matches the design while retaining the same package family and core memory architecture. Because suffix meanings can change with device ordering information, use the manufacturer ordering table rather than assuming the parts are interchangeable solely because their base numbers match.
Is ATMEGA32M1-MU suitable for industrial control applications?
The ATMEGA32M1-MU can be used in industrial-control designs when its specified supply voltage, temperature range, and peripheral set satisfy the equipment requirements. It provides 27 GPIO lines, 16 MHz maximum clock performance, 32 KB Flash, 1 KB EEPROM, and 2 KB SRAM for compact controllers. Compliance with RoHS, REACH, or AEC-Q100 should be confirmed separately when required by the end product, and industrial temperature qualification must not be inferred from the package alone.
How do I calculate the power budget for an ATMEGA32M1-MU design?
Calculate the MCU budget from the actual supply voltage, active current, sleep current, and the number and state of attached GPIO loads. The ATMEGA32M1-MU operates from a 3.3 V to 5 V supply, and its exact operating-current limits must be taken from the manufacturer electrical characteristics. Do not rely only on the 16 MHz clock rating because GPIO drive, peripherals, and external pull networks can dominate the supply current. Use measured or manufacturer-current-condition values for the final thermal and regulator design.
What is the ATMEGA32M1-MU lifecycle status?
Microchip Technology maintains a current product page for the ATmega32M1 family and the ATMEGA32M1-MU remains represented in distributor catalogs. This page therefore treats the device as active, but production planners should still request the latest lifecycle and ordering confirmation for the exact suffix. The manufacturer product page remains the authoritative place to verify revisions, qualification status, and any changes affecting long-term procurement.
Where can I buy ATMEGA32M1-MU and check its lead time?
Use the Request a Quote form on this page to request ATMEGA32M1-MU pricing, stock confirmation, and lead time for the exact 32-VQFN ordering variant. The manufacturer lists the ATmega32M1 family, and distributor records identify ATMEGA32M1-MU with 32 KB Flash, 1 KB EEPROM, 2 KB SRAM, and a 32-VQFN package. For production planning, specify quantity, date code, target quantity, and acceptable alternates in the quotation request.
What is the price of the ATMEGA32M1-MU?
Current ATMEGA32M1-MU pricing is best requested through the Request a Quote form on this page because quotations can depend on quantity, date code, packaging, and current inventory. The component is an 8-bit AVR microcontroller with 32 KB Flash, 1 KB EEPROM, 2 KB SRAM, and a 32-VQFN 5 x 5 mm package. Include your required order quantity and target date so the quote can be matched to the exact production need.
Is ATMEGA32M1-MU currently in stock?
Use the Request a Quote form on this page for an immediate ATMEGA32M1-MU stock and lead-time response tied to your required quantity. The device is listed by Microchip Technology and appears in current distributor catalogs with a 32-VQFN 5 x 5 mm package, 16 MHz maximum clock, 32 KB Flash, 1 KB EEPROM, and 2 KB SRAM. Include target date code and acceptable date-code window if supply continuity is important.
What is the best cross-brand equivalent for the ATMEGA32M1-MU?
No cross-brand drop-in equivalent can be recommended solely from the available manufacturer and cross-reference records. The ATMEGA32M1-MU combines a 32-VQFN footprint, AVR instruction set, 32 KB Flash, 1 KB EEPROM, 2 KB SRAM, and 27 GPIO lines; matching all of those electrical and software requirements is more restrictive than matching the package. Evaluate any competitor against the complete pin table, clock range, supply voltage, memory map, interrupt vector layout, and programming-tool ecosystem before approving a drop-in substitution.

Datos de referencia de ingeniería para ATMEGA32M1-MU — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose ATMEGA32M1-MU when the design needs a compact 8-bit AVR controller with 16 MHz performance, 32 KB of Flash, 1 KB of EEPROM, 2 KB of SRAM, 27 GPIO lines, and a 32-VQFN 5 x 5 mm footprint. Select ATMEGA32M1-15MU or ATMEGA32M1-15MZ when the ordering suffix provides a better match for the required voltage, temperature, or production configuration, after checking the manufacturer ordering table. Use ATMEGA64M1-MU or ATMEGA64M1-15MZ when 64 KB of Flash provides meaningful value and the changed SRAM or peripheral configuration remains acceptable. Consider ATMEGA16U2-MU only when its USB-oriented features are useful and its 16 KB Flash limit, pin multiplexing, and firmware differences are acceptable. No alternative should be approved solely from package appearance; validate the complete pin description, electrical limits, memory map, and programming workflow.

Comparación con alternativas

Parámetro Este producto ATMEGA32M1-15MU ATMEGA32M1-15MZ ATMEGA64M1-MU ATMEGA64M1-15MZ ATMEGA16U2-MU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-VQFN (5 x 5 mm) 32-VQFN (5 x 5 mm) 32-VQFN (5 x 5 mm) 32-VQFN (5 x 5 mm) 32-VQFN (5 x 5 mm) 32-VQFN with exposed pad
Core Architecture 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC
Flash Memory 32 KB 32 KB 32 KB 64 KB 64 KB 16 KB
Special Feature General-purpose 8-bit embedded-control MCU General-purpose 8-bit embedded-control MCU General-purpose 8-bit embedded-control MCU Expanded Flash capacity Expanded Flash capacity USB-oriented peripheral variant

Diferenciadores clave

  • Larger Flash option available in a pin-compatible family member (frente a ATMEGA64M1-MU)
  • Same core memory configuration in alternate ordering variants (frente a ATMEGA32M1-15MU)
  • More program memory than the lower-capacity USB-oriented option (frente a ATMEGA16U2-MU)

Notas de diseño

Assign the ATMEGA32M1-MU 32-VQFN footprint from the manufacturer package drawing rather than scaling a generic QFN land pattern. Verify pin 1 orientation, exposed-pad dimensions, paste mask, and solder-mask clearance. Keep the decoupling capacitor at the associated supply pins as close as practical, provide a low-impedance ground return, and route programming, reset, and clock nets away from motor or relay switching nodes.

Estimated: build the supply budget from the 3.3 V to 5 V rail voltage multiplied by the measured operating and sleep currents of the ATMEGA32M1-MU, then add GPIO loading, pull-up or pull-down dissipation, and peripheral currents. Use the manufacturer current values for the exact operating mode rather than estimating from the 16 MHz clock. Include regulator tolerance, transient margin, and startup inrush, and ensure the MCU rail remains within the selected ordering variant's electrical limits.

Treat the exposed pad as both a thermal and electrical package feature. Confirm whether it must be tied to ground, connected to a supply rail, or left according to the device datasheet, then provide the corresponding copper and via arrangement. Do not assume that all 32-VQFN devices use the same exposed-pad connection. Validate final solderability and assembly capability using the manufacturer package dimensions and the PCB fabricator's current design rules.

A matching package name does not prove that every suffix is a drop-in replacement. Check voltage range, temperature grade, Flash size, SRAM size, pin multiplexing, interrupt behavior, clock configuration, and programming interface before substituting ATMEGA32M1 or ATMEGA64M1 variants. For ATMEGA16U2-MU, also review USB and peripheral differences. Preserve a bootloader or reflash path when moving between ordering variants so field recovery remains possible.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The ATMEGA32M1-MU is an industrial and commercial microcontroller rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed from the manufacturer's current compliance documentation for the exact ordering code.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

atmega32m1 datasheet atmega32m1 pdf atmega32m1 board atmega32m1 arduino ATMEGA32M1-MU datasheet ATMEGA32M1-MU pinout ATMEGA32M1-MU specifications ATMEGA32M1-MU 32-VQFN ATMEGA32M1-MU replacement ATMEGA32M1-MU equivalent ATMEGA32M1-MU vs ATMEGA64M1-MU Microchip ATMEGA32M1-MU ATMEGA32M1-MU price ATMEGA32M1-MU stock

Componentes & términos relacionados

Microchip Technology ATMEGA32M1-MU ATMEGA32M1-15MU ATMEGA32M1-15MZ ATMEGA64M1-MU ATMEGA64M1-15MZ ATMEGA16U2-MU ATmega32M1 AVR AVR RISC 8-bit microcontroller embedded controller semiconductor ISP Flash read-while-write EEPROM SRAM general-purpose I/O 32-VQFN QFN family surface mount SMD industrial control IoT node
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ