ATMEGA32M1-MU - 8-Bit AVR MCU, 16MHz, 32KB Flash
部品番号: ATMEGA32M1-MU ✓ 生産中ATMEGA32M1-MU 概要
An 8-bit microcontroller is a programmable integrated circuit built around an 8-bit data path and a reduced-instruction-set computer architecture. Within the embedded-control hierarchy, the ATMEGA32M1 combines a CPU core, nonvolatile program memory, data EEPROM, SRAM, peripherals, and GPIO in one device. Its architecture falls within the broader categories of embedded processor, microcontroller, and semiconductor, making it suitable for compact control, sensing, communication, and industrial automation products.
Key device characteristics include 32 KB of ISP Flash with read-while-write capability, 1 KB of EEPROM, and 2 KB of SRAM. The device provides 27 general-purpose I/O lines and 32 general-purpose working registers. Its memory organization allows application firmware, configuration data, and working variables to coexist on the same chip. The 32-VQFN 5 x 5 mm package also supports surface-mount assembly in space-constrained equipment.
The ATMEGA32M1 platform integrates communication and control peripherals with an AVR instruction set and Harvard-style memory architecture. Programmable timers support event counting, pulse generation, and periodic control, while serial interfaces support communication with sensors, transceivers, displays, and host systems. The exact peripheral configuration, operating voltage limits, clock options, and electrical timing values should be confirmed in the manufacturer datasheet before final schematic and firmware design.
Typical applications include industrial control modules, compact motor controllers, building and HVAC equipment, low-cost instrumentation, communications equipment, consumer accessories, and low-power embedded nodes. Its 2 KB SRAM is suitable for moderate working sets, while the 32 KB Flash capacity accommodates substantially more application code than the smallest 8-bit devices. External serial EEPROM or Flash should be considered when a project requires additional nonvolatile storage.
Place the device close to its decoupling network, keep high-current switching loops away from sensitive analog and communication traces, and provide continuous copper beneath the exposed pad where the package construction requires thermal coupling. Confirm the exposed-pad connection, programming access, reset circuit, clock arrangement, and pin multiplexing against the manufacturer pin-description table before layout release.
This product page combines the manufacturer product description, distributor technical records, package and memory details, replacement guidance, and practical embedded-design considerations. It is intended to help engineers evaluate the ATMEGA32M1-MU, compare pin-compatible family options, and prepare a compact, low-power 8-bit control design with fewer component-level surprises.
ドロップイン代替品: ATMEGA32M1-MU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATMEGA32M1-MU (同一形状・フットプリント) — 相違点: Package, SRAM, Flash Memory, EEPROM, Core Architecture.
ATMEGA32M1-15MU
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
ATMEGA32M1-15MZ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ATMEGA64M1-MU
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →ATMEGA64M1-15MZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATMEGA16U2-MU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATMEGA32M1-MU 最大定格&電気的特性
| Product Type | 8-bit AVR RISC microcontroller (dimensionless classification) |
| 最大クロック周波数 | 16 MHz |
| Flash Memory | 32 KB (16K x 16 words) |
| EEPROM Memory | 1 KB |
| SRAM | 2 KB |
| General-Purpose I/O Lines | 27 lines |
| General-Purpose Working Registers | 32 registers |
| 電源電圧 | 3.3 V to 5 V |
| パッケージ | 32-VQFN, 5 x 5 mm |
| 実装タイプ | Surface mount |
| Program Memory Type | ISP Flash with read-while-write (dimensionless) |
| Architecture | AVR RISC instruction set (dimensionless) |
| I/O Voltage | 3.3 V to 5 V |
ATMEGA32M1-MU 32-vqfn, 5 x 5 mm ピン配置ガイド
ATMEGA32M1-MU (32-vqfn, 5 x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATMEGA32M1-MU.
詳細は データシート をご参照ください。
主な用途
ATMEGA32M1-MU の用途: 6 件s: Compact Industrial Control Module, Building and HVAC Equipment, Motor and Timing Controller, Serial Sensor and IoT Node, Programmable Logic and Relay Controller, Low-Cost Data Acquisition Front End.
Compact Industrial Control Module
The ATMEGA32M1-MU fits compact industrial controllers that coordinate digital inputs, outputs, timers, and serial sensors within a 32-VQFN 5 x 5 mm footprint. Its 16 MHz AVR core provides responsive control-loop capability, while 32 KB of ISP Flash gives application firmware room for state-machine logic, communication routines, and configuration handling. The 27 GPIO lines can connect switches, status indicators, relays, and discrete sensors without requiring a large external GPIO expander. Keep sensitive switching nodes separated from communication and analog traces, and confirm the device temperature range against the enclosure environment.
おすすめ
Building and HVAC Equipment
ATMEGA32M1-MU can serve as the central controller in a compact HVAC or building-automation module because it combines 27 GPIO lines, timers, 1 KB EEPROM, and 2 KB SRAM for sensor inputs, actuator commands, schedules, and operating-state tracking. Its 3.3 V to 5 V supply compatibility allows integration with common control boards, while the 32-VQFN package reduces board area in enclosed controllers. EEPROM can retain calibration or configuration values, although the endurance and write-time limits should be checked in the manufacturer electrical characteristics. Firmware should include watchdog recovery and safe actuator states after reset or power loss.
おすすめ
Motor and Timing Controller
The ATMEGA32M1-MU is appropriate for small motor, valve, or precision-timing modules where a 16 MHz AVR controller must coordinate pulse inputs, output switching, and supervisory logic. Two KB of SRAM supports modest task stacks and working variables, while the 32 KB Flash capacity accommodates closed-loop routines and diagnostic functions. Programmable timers can generate the required timing sequence, and GPIO pins can capture switch or sensor events. External transistors, drivers, current sensing, and protection components remain necessary because the MCU does not directly provide power-stage functionality. Validate timing margins under worst-case interrupt load and account for switching-node electrical noise.
おすすめ
Serial Sensor and IoT Node
ATMEGA32M1-MU works well in a compact sensor node that must acquire digital measurements, run local filtering, and forward information through a serial interface. Its 27 GPIO lines provide connections for sensors and status signals, while 1 KB of EEPROM can retain calibration values or network parameters. At 16 MHz, the AVR core can service multiple interrupt-driven peripheral routines without occupying excessive board area. A communications transceiver remains external to the MCU. For a battery-operated design, calculate the complete sleep and wake current budget, disable unused peripherals, and use the manufacturer low-power modes rather than estimating current solely from the nominal clock speed.
おすすめ
Programmable Logic and Relay Controller
The ATMEGA32M1-MU can implement a compact programmable relay or digital-output controller where firmware must coordinate multiple outputs, validate input sequences, and maintain safe states. Its 32 KB Flash provides space for configuration tables, event logging, and field-upgrade logic, while 2 KB of SRAM supports queues and state variables. The 32-VQFN 5 x 5 mm package is useful in densely populated control products. Use the pin-description table to select pins with suitable alternate functions, and design the high-current interface so relay-coil transients and ground bounce cannot corrupt MCU supply or control signals.
おすすめ
Low-Cost Data Acquisition Front End
ATMEGA32M1-MU is suitable for a compact instrumentation front end that gathers digital sensor states, performs basic filtering or thresholding, and transfers results to a host. The 16 MHz AVR core supports responsive peripheral servicing, and 27 GPIO lines can connect multiplexed digital channels, status signals, and a communications interface. Two KB of SRAM is adequate for modest sample buffers but not for large waveform capture, so applications requiring extended storage should add external memory or select a higher-memory family member. Design analog front-end circuitry separately and maintain grounding and return-current separation between sensing and switching sections.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATMEGA32M1-MU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATMEGA32M1-15MU | ATMEGA32M1-15MZ | ATMEGA64M1-MU | ATMEGA64M1-15MZ | ATMEGA16U2-MU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VQFN (5 x 5 mm) | 32-VQFN (5 x 5 mm) | 32-VQFN (5 x 5 mm) | 32-VQFN (5 x 5 mm) | 32-VQFN (5 x 5 mm) | 32-VQFN with exposed pad |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC |
| Flash Memory | 32 KB | 32 KB | 32 KB | 64 KB | 64 KB | 16 KB |
| Special Feature | General-purpose 8-bit embedded-control MCU | General-purpose 8-bit embedded-control MCU | General-purpose 8-bit embedded-control MCU | Expanded Flash capacity | Expanded Flash capacity | USB-oriented peripheral variant |
主な差別化要因
- Larger Flash option available in a pin-compatible family member (vs ATMEGA64M1-MU)
- Same core memory configuration in alternate ordering variants (vs ATMEGA32M1-15MU)
- More program memory than the lower-capacity USB-oriented option (vs ATMEGA16U2-MU)
設計ノート
Assign the ATMEGA32M1-MU 32-VQFN footprint from the manufacturer package drawing rather than scaling a generic QFN land pattern. Verify pin 1 orientation, exposed-pad dimensions, paste mask, and solder-mask clearance. Keep the decoupling capacitor at the associated supply pins as close as practical, provide a low-impedance ground return, and route programming, reset, and clock nets away from motor or relay switching nodes.
Estimated: build the supply budget from the 3.3 V to 5 V rail voltage multiplied by the measured operating and sleep currents of the ATMEGA32M1-MU, then add GPIO loading, pull-up or pull-down dissipation, and peripheral currents. Use the manufacturer current values for the exact operating mode rather than estimating from the 16 MHz clock. Include regulator tolerance, transient margin, and startup inrush, and ensure the MCU rail remains within the selected ordering variant's electrical limits.
Treat the exposed pad as both a thermal and electrical package feature. Confirm whether it must be tied to ground, connected to a supply rail, or left according to the device datasheet, then provide the corresponding copper and via arrangement. Do not assume that all 32-VQFN devices use the same exposed-pad connection. Validate final solderability and assembly capability using the manufacturer package dimensions and the PCB fabricator's current design rules.
A matching package name does not prove that every suffix is a drop-in replacement. Check voltage range, temperature grade, Flash size, SRAM size, pin multiplexing, interrupt behavior, clock configuration, and programming interface before substituting ATMEGA32M1 or ATMEGA64M1 variants. For ATMEGA16U2-MU, also review USB and peripheral differences. Preserve a bootloader or reflash path when moving between ordering variants so field recovery remains possible.
コンプライアンス情報
The ATMEGA32M1-MU is an industrial and commercial microcontroller rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed from the manufacturer's current compliance documentation for the exact ordering code.