Microchip Technology

ATSAMD20E14A-AU - 48MHz Cortex-M0+ MCU | Microchip

N.º de pieza: ATSAMD20E14A-AU ✓ Activo
1.62 V to 3.6 V Vdss 32-pin TQFP, 7 x 7 mm Package 48 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

ATSAMD20E14A-AU Descripción general

The Microchip Technology ATSAMD20E14A-AU is a low-power, 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, with 16 KB of flash memory, 2 KB of SRAM, and a 32-pin TQFP package measuring 7 x 7 mm. It combines a compact general-purpose MCU architecture with embedded flash for compact control, sensing, metering, and automation products.

A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and input/output interfaces onto one chip. The ARM Cortex-M0+ core uses the Thumb instruction set and is designed for efficient embedded control. Within the product hierarchy, the ATSAMD20E14A-AU is an ARM Cortex-M0+ MCU, part of the SAM D20 family, and a member of Microchip's embedded microcontrollers and semiconductor portfolio.

Key features include a maximum clock frequency of 48 MHz, 16 KB of flash, 2 KB of SRAM, and integrated programmable I/O capabilities suited to embedded control. The single-core 32-bit architecture provides sufficient processing performance for protocol handling, digital control, low-rate data acquisition, and user-interface logic without requiring a larger system-on-chip. Its 32-TQFP package also supports conventional PCB assembly and external test access.

The ATSAMD20E14A-AU is positioned as a low-power solution for home automation, consumer products, metering, and industrial applications. Its Cortex-M0+ core provides a common instruction set and efficient code density, while the 16 KB flash budget supports compact boot logic and application firmware. With 2 KB of SRAM, designers must manage buffering and avoid allocating large static or dynamic memory structures simultaneously.

Typical deployments include connected home devices, utility and resource meters, compact sensor controllers, industrial monitoring modules, and low-cost consumer controls. The device can coordinate digital inputs, sensor interfaces, communication peripherals, and actuator outputs while maintaining a small footprint. Its operating voltage range is identified as 1.62 V to 3.6 V, making it appropriate for low-voltage embedded systems designed around 3.3 V rails.

A primary design consideration is memory sizing. Firmware overhead, bootloader code, stack depth, interrupt handlers, and data buffers must fit within 16 KB of flash and 2 KB of SRAM. Place required bypass capacitors near the power pins, route sensitive signals away from switching nodes, and follow the manufacturer's pin-description and recommended-circuit diagrams when assigning the 32 TQFP lands.

This page combines manufacturer specifications, verified sourcing information, pin-compatible family alternatives, application guidance, and practical design notes to support faster component selection and PCB implementation. It also distinguishes electrical and package characteristics that require confirmation before treating a related device as a production replacement.

Alternativas directas para ATSAMD20E14A-AU — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con ATSAMD20E14A-AU (mismo factor de forma y huella) — difiere en Package, ADC, RTC, DAC, Program Memory (Flash).

Microchip Technology
Package: 32-TQFP (7x7 mm)
RTC: 32 kHz with calendar
DAC: 10-bit
Comparar con ATSAMD20E14A-AU →
Microchip Technology
Package: 32-VQFN (5x5 mm) with Exposed Pad
ADC: 12-bit, up to 10 channels, 350 kSPS
RTC: Yes, 32.768 kHz support
Comparar con ATSAMD20E14A-AU →
Microchip Technology
ADC: 12-bit, up to 350 ksps, up to 10 channels
RTC: 32 kHz, with calendar
DAC: 10-bit, 350 ksps
Comparar con ATSAMD20E14A-AU →
Microchip Technology
Package: 32-pin TQFP (7x7 mm)
ADC: 12-bit, up to 350 ksps
DAC: 10-bit, 350 ksps
Comparar con ATSAMD20E14A-AU →
Microchip Technology
Package: 32-TQFP (7x7 mm)
ADC: 12-bit, up to 20 channels
DAC: 10-bit, 1 channel
Comparar con ATSAMD20E14A-AU →
Microchip Technology
Package: 48-TQFP (7x7 mm)
Comparar con ATSAMD20E14A-AU →
Microchip Technology
Package: 48-VFQFN Exposed Pad (7x7 mm)
ADC: 12-bit, up to 350 ksps
RTC: 32 kHz internal RTC
Comparar con ATSAMD20E14A-AU →

ATSAMD20E14B-AU

✅ Sustitución directa
Microchip Technology
📦 32-TQFP (7 x 7 mm)
ARM Cortex-M0+ (32-bit) · SAM D20E · 48 MHz · 16 KB (16K x 8) · 2 KB · 1.62 V to 3.63 V · -40 C to +85 C (Industrial) · 32-pin TQFP (7x7 mm)

Consulte el precio

Ver hoja de datos →

ATSAMD20E14A-MU

✅ Sustitución directa
Microchip Technology
📦 32-TQFP (7 x 7 mm)
Microchip Technology (formerly Atmel) · SAM D20 · ARM Cortex-M0+ (32-bit) · 48 MHz · 2.14 · 16 KB (16K x 8) · 2 KB · 1.62 V to 3.63 V

Consulte el precio

Ver hoja de datos →

ATSAMD20E14A-MNT

✅ Sustitución directa
Microchip Technology
📦 32-TQFP (7 x 7 mm)
ARM Cortex-M0+ (32-bit) · SAM D20E · 48 MHz · 16 KB · 2 KB · 1.62 V to 3.63 V · 2.14 · -40 C to +105 C

Consulte el precio

Ver hoja de datos →

ATSAMD20E14A-ANT

✅ Sustitución directa
📦 32-TQFP (7 x 7 mm)
The 32-bit Cortex-M0+ core, 48 MHz clock, 16 KB flash and 2 KB SRAM match; the ordering suffix differs by 0 in core, memory, and speed.

📋 Alternativa de referencia (no en el catálogo)

ATSAMD20G14A-AUT

✅ Sustitución directa
Microchip Technology
📦 32-TQFP (7 x 7 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 16 KB (16K x 8) · 2 KB · 1.62 V to 3.63 V · 48-TQFP (7x7 mm)

Consulte el precio

Ver hoja de datos →

ATSAMD20E14A-AU Valores máximos y características eléctricas

Product Type ARM Cortex-M0+ Flash Microcontroller
Product Family SAM D20
Processor Core Single-core ARM Cortex-M0+
Architecture 32-bit
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB (16K x 8)
SRAM 2 KB
Operating Voltage Range 1.62 V to 3.6 V
Encapsulado 32-pin TQFP, 7 x 7 mm
Tipo de montaje Surface Mount
Program Memory Type Flash
Estado RoHS Compliant

Guía de configuración de pines de ATSAMD20E14A-AU 32-pin tqfp, 7 x 7 mm

Configuración de pines para ATSAMD20E14A-AU (encapsulado 32-pin tqfp, 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 32-pin tqfp, 7 x 7 mm para ATSAMD20E14A-AU

No hay datos detallados de patillaje disponibles para ATSAMD20E14A-AU.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ATSAMD20E14A-AU es adecuado para 6 aplicacións: Home Automation Controller, Smart Metering Module, Industrial Sensor Interface, Consumer Appliance Control, Connected Equipment Node, Data Acquisition and Control.

🧩

Home Automation Controller

The ATSAMD20E14A-AU fits compact home-automation modules that combine digital inputs, relay or LED outputs, and low-speed serial communications. Its 48 MHz ARM Cortex-M0+ core provides sufficient control throughput for protocol handling and debounce logic, while 16 KB of flash stores the application and 2 KB of SRAM supports short communication buffers. The 32-TQFP footprint preserves board area, and the 1.62 V to 3.6 V operating range accommodates low-voltage 3.3 V systems. Firmware should limit simultaneous buffers because the available SRAM is only 2 KB.

⚡

Smart Metering Module

The ATSAMD20E14A-AU is suitable for metering and energy-monitoring modules that acquire periodic sensor readings, apply calibration, and transmit results. Its Cortex-M0+ processor can execute measurement scheduling, filtering, and compact communication firmware at up to 48 MHz. The 16 KB flash is appropriate for a focused meter application rather than a large protocol stack, while 2 KB of SRAM can hold sampled values and a limited packet buffer. Its low-voltage operation supports compact battery-assisted or line-powered designs with carefully controlled quiescent behavior.

🏭

Industrial Sensor Interface

The ATSAMD20E14A-AU can serve as the local controller for industrial sensors that digitize measurements, apply thresholds, and report status through a serial interface. At 48 MHz, the Cortex-M0+ core provides ample performance for digital filtering and control without requiring an external processor. The 16 KB flash and 2 KB SRAM require disciplined buffer allocation, especially when handling simultaneous sensor channels. The 32-pin TQFP package provides a conventional surface-mount footprint, and the 1.62 V to 3.6 V range supports compatible industrial interface circuitry.

📱

Consumer Appliance Control

The ATSAMD20E14A-AU is appropriate for compact consumer appliances and controls that coordinate buttons, displays, indicators, and external actuators. Its efficient 32-bit Cortex-M0+ architecture supports responsive state-machine control, timing, and serial peripheral management. Firmware and interrupt routines must fit within 16 KB of flash, while the 2 KB SRAM limits temporary buffering and encourages event-driven design. The low 1.62 V minimum operating voltage provides flexibility around low-voltage internal rails, and the 7 x 7 mm TQFP package reduces PCB footprint.

🌐

Connected Equipment Node

The ATSAMD20E14A-AU can act as a connected equipment node that samples machine state, detects events, and forwards compact diagnostic records. The 48 MHz Cortex-M0+ core can manage interrupts, timers, and lightweight serial protocols while the 16 KB flash stores a dedicated application. Because SRAM is limited to 2 KB, the design should avoid large frame buffers and process data incrementally. The 32-TQFP package allows integration into dense equipment-control boards, and the 1.62 V to 3.6 V range supports common embedded voltage rails.

🖥️

Data Acquisition and Control

The ATSAMD20E14A-AU is useful for small data-acquisition and control subsystems that sequence analog or digital measurements and coordinate outputs. Its 48 MHz Cortex-M0+ core can manage sampling timers, basic filtering, and control logic, while 16 KB of flash accommodates targeted application code. The 2 KB SRAM supports transient sample and status storage but not large histories. Designers should use the manufacturer's pin-description table for analog-capable pins and place input filtering and supply-decoupling components according to the recommended application circuit.

Resumen de productos recomendados

ATSAMD20E14B-AU Microchip Technology Se usa en: Home Automation Controller, Industrial Sensor Interface, Connected Equipment Node ATSAMD20G14A-AU 48 MHz SAM D20 family alternative Se usa en: Home Automation Controller, Industrial Sensor Interface, Connected Equipment Node ATSAMD20E14A-MU Microchip Technology Se usa en: Smart Metering Module, Consumer Appliance Control, Data Acquisition and Control ATSAMD20E14A-MN Same-family SAM D20 controller Se usa en: Smart Metering Module, Data Acquisition and Control ATSAMD20E14A-ANT Related SAM D20 ordering option Se usa en: Consumer Appliance Control
What are the key specifications of ATSAMD20E14A-AU that engineers should know?
The ATSAMD20E14A-AU combines a 32-bit ARM Cortex-M0+ core, 48 MHz maximum operating frequency, 16 KB of flash, 2 KB of SRAM, and a 32-pin 7 x 7 mm TQFP package. According to the Microchip ATSAMD20E14 product page, it is a low-power flash microcontroller intended for home automation, consumer, metering, and industrial products. Its 1.62 V to 3.6 V operating range supports compact, low-voltage embedded systems.
What is ATSAMD20E14A-AU and what is it used for?
The ATSAMD20E14A-AU is a low-power, 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20 family. According to Microchip's product page, it provides 16 KB of flash, 2 KB of SRAM, and operation up to 48 MHz. It is intended for home automation, consumer equipment, metering, and industrial applications where a compact controller is needed to coordinate sensors, communications, digital inputs, and actuator outputs.
What is the operating voltage range of ATSAMD20E14A-AU?
The ATSAMD20E14A-AU operates from 1.62 V to 3.6 V. This low-voltage range allows use with 3.3 V embedded systems and compatible lower-voltage power designs. According to the Microchip ATSAMD20E14 product page, the device belongs to the low-power SAM D20 family. Confirm the selected clock configuration, peripherals, and I/O voltage limits against the manufacturer datasheet before applying the full voltage range to every interface.
How much flash and SRAM does ATSAMD20E14A-AU have?
The ATSAMD20E14A-AU has 16 KB of flash memory and 2 KB of SRAM. According to the Microchip product page and distributor specifications, flash is organized as 16K x 8 and supports embedded program storage. The 2 KB SRAM is modest, so application firmware should account for stack usage, buffered measurements, communication frames, and any operating-system overhead rather than treating the full memory capacity as freely available.
Where can I download the ATSAMD20E14A-AU datasheet PDF?
The ATSAMD20E14A-AU datasheet PDF is available from the manufacturer product documentation and the Atmel document listing linked on this page. The manufacturer product page is https://www.microchip.com/en-us/product/ATSAMD20E14, while a PDF entry appears at https://www.alldatasheet.com/datasheet-pdf/pdf/554411/ATMEL/ATSAMD20E14A-AU.html. Use the manufacturer copy for final design, pin, electrical, and errata decisions.
Where can I find the ATSAMD20E14A-AU pinout and TQFP-32 land pattern?
The ATSAMD20E14A-AU uses a 32-pin TQFP package measuring 7 x 7 mm, and its complete pin assignment is shown in the manufacturer pin-description table. The product documentation is linked through https://www.microchip.com/en-us/product/ATSAMD20E14. Use that table for PCB land assignment, power-pin placement, programming access, and exposed test points; the package drawing also identifies pin-1 orientation.
Where can I buy ATSAMD20E14A-AU online?
The ATSAMD20E14A-AU can be requested through the Request a Quote form on this page for current commercial availability, lot conditions, and delivery planning. The manufacturer identifies the device as an active SAM D20 product, and distributor listings include the exact 32-TQFP ordering code. Use the quote form to obtain a current response rather than relying on a static listing or an unconfirmed inventory count.
What is the price of ATSAMD20E14A-AU?
Current ATSAMD20E14A-AU commercial pricing depends on quantity, sourcing channel, and order conditions. Use the Request a Quote form on this page to request the applicable unit price and quantity breaks for the exact 32-TQFP ordering code. The form is also the appropriate route for checking scheduled deliveries because market prices and inventory can change independently of the component's technical specifications.
What is the lead time for ATSAMD20E14A-AU?
The ATSAMD20E14A-AU lead time should be confirmed for the required quantity through the Request a Quote form on this page. The component is listed as active and is distributed as a standard catalog part, but actual delivery scheduling depends on stock position, manufacturing plans, package choice, and purchase volume. Providing the exact MPN, target quantity, and destination country enables a more useful quotation response.
Is ATSAMD20E14A-AU in stock?
ATSAMD20E14A-AU is listed as an active product, but live stock should not be inferred from a general search listing. Use the Request a Quote form on this page to request current availability for the exact MPN and quantity. This is particularly important for scheduled production because distributor inventory can change independently of lifecycle status, while larger orders may require a manufacturer allocation rather than consumption of spot stock.
What is the best drop-in replacement for ATSAMD20E14A-AU?
The closest replacement depends on whether memory, temperature grade, and qualification requirements remain unchanged. ATSAMD20E14B-AU and selected ATSAMD20E14A package variants can share the 32-TQFP SAM D20 architecture, but each suffix must be checked for temperature, packing, and ordering-code differences. The ATSAMD20G14A-AU is another 48 MHz Cortex-M0+ family option, although its configuration differs. Confirm pin, memory, clock, and qualification compatibility before replacement.
Can ATSAMD20E14A-MU replace ATSAMD20E14A-AU?
ATSAMD20E14A-MU is a closely related Microchip SAM D20 device and may satisfy the same footprint and core requirements, but the ordering suffix must be checked before substitution. Both devices are associated with the 32-bit Cortex-M0+ SAM D20 family, while the suffix can identify temperature-range or packing differences. Use the manufacturer pin and ordering tables to confirm that 16 KB flash, 2 KB SRAM, 48 MHz operation, and all required peripheral functions remain unchanged.
ATSAMD20E14A-AU vs ATSAMD20G14A-AU: which is better for a low-cost controller?
Choose ATSAMD20E14A-AU when its 16 KB flash and 2 KB SRAM match the established design exactly. ATSAMD20G14A-AU is also described as a 48 MHz, ARM Cortex-M0+, low-power SAM D20 device, but its peripheral and memory configuration should be compared with the target before substitution. The correct choice depends on which device matches the required I/O mix, memory footprint, voltage behavior, and qualification conditions rather than package appearance alone.
When should I choose ATSAMD20E14A-AU over ATSAMD20E14B-AU?
Choose ATSAMD20E14A-AU when the design is already qualified around the original ordering code and its 16 KB flash, 2 KB SRAM, and 48 MHz Cortex-M0+ configuration. ATSAMD20E14B-AU may be preferable only when its manufacturer-defined revision, qualification, or temperature characteristics provide a needed benefit without changing the application. Review the ordering information and device revision notes before moving a production design to the B suffix.
What is the best Microchip equivalent for ATSAMD20E14A-AU?
The best Microchip equivalent is the device whose 32-TQFP pinout, 16 KB flash, 2 KB SRAM, 48 MHz Cortex-M0+ performance, voltage range, and temperature requirements all match the original. ATSAMD20E14B-AU is the primary same-family candidate to evaluate, while ATSAMD20E14A-MU and ATSAMD20G14A-AU may suit particular ordering or configuration needs. A valid drop-in decision must be based on the manufacturer's device comparison rather than functional similarity alone.

Datos de referencia de ingeniería para ATSAMD20E14A-AU — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the ATSAMD20E14A-AU for compact embedded-control designs requiring a 48 MHz ARM Cortex-M0+ core, 16 KB of flash, 2 KB of SRAM, and a 32-TQFP footprint. It is particularly suitable for home automation, metering, consumer control, and industrial sensor modules whose firmware fits the modest memory budget. ATSAMD20E14B-AU is the closest same-family candidate to evaluate when a later revision provides a useful qualification or product-lifecycle benefit. ATSAMD20E14A-MU, ATSAMD20E14A-MN, and ATSAMD20E14A-ANT preserve the core speed and memory class but require ordering-suffix review for temperature, packing, or qualification differences. ATSAMD20G14A-AU may suit a comparable low-power design when its specific peripheral and memory configuration is acceptable. No verified cross-brand drop-in candidate was established. Before production substitution, compare every pin, peripheral, voltage, temperature, programming, and qualification requirement against the manufacturer documentation.

Comparación con alternativas

Parámetro Este producto ATSAMD20E14B-AU ATSAMD20E14A-MU ATSAMD20E14A-MN ATSAMD20E14A-ANT ATSAMD20G14A-AU
Package 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Architecture 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz

Diferenciadores clave

  • Compact low-power Cortex-M0+ implementation (frente a ATSAMD20G14A-AU)
  • Established A-series ordering configuration (frente a ATSAMD20E14B-AU)
  • Direct SAM D20 family fit for low-cost controls (frente a ATSAMD20E14A-MU)

Notas de diseño

Assign all 32 lands from the manufacturer's pin-description table and preserve the TQFP-32 footprint orientation. Place the required supply-bypass capacitors next to their associated power pins, keep the ground return path short, and provide accessible programming and reset connections. The 7 x 7 mm package leaves little room for routing errors, so verify pin-1 orientation and paste-land symmetry against the package drawing before releasing the PCB.

Design the power tree for the documented 1.62 V to 3.6 V operating range and ensure that every external signal remains within its permitted voltage domain. Use local decoupling at the MCU supply pins and isolate analog or communication interfaces from noisy switching nodes. The 48 MHz operating rate does not eliminate dynamic-current demand, so include sufficient source capability and verify the power-supply transient response with realistic peripheral activity.

Budget firmware and SRAM carefully: the ATSAMD20E14A-AU provides only 16 KB of flash and 2 KB of SRAM. Include startup code, interrupt handlers, stack headroom, library overhead, and protocol buffers in the memory plan. Avoid unbounded queues and large local arrays, and measure the application's highest stack depth under interrupts. A device can compile and boot correctly yet fail later when a communication buffer consumes the remaining SRAM.

Follow the manufacturer's recommended application circuit for clock stability, decoupling, and external component placement. Keep sensitive measurement inputs away from switching supplies and high-current outputs, maintain short return paths, and use a continuous ground reference beneath the device where layout rules permit. If using analog-capable pins for metering or sensing, confirm their multiplexed functions and acquisition requirements in the pin table rather than treating every general-purpose I/O as equivalent.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

RoHS compliance is indicated by the component listing. No manufacturer statement confirming REACH, lead-free status, halogen-free status, conflict-minerals compliance, or automotive qualification was available for this exact ordering code.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

ATSAMD20E14A-AU ATSAMD20E14A-AU datasheet ATSAMD20E14A-AU datasheet pdf ATSAMD20E14A-AU pinout ATSAMD20E14A-AU equivalent ATSAMD20E14A-AU replacement ATSAMD20E14A-AU price ATSAMD20E14A-AU stock ATSAMD20E14A-AU TQFP-32 footprint ATSAMD20E14A-AU vs ATSAMD20E14B-AU ATSAMD20E14A-AU application circuit Microchip ATSAMD20E14A-AU

Componentes & términos relacionados

Microchip Technology ATSAMD20E14A-AU ATSAMD20E14 ATSAMD20E14B-AU ATSAMD20E14A-MU ATSAMD20E14A-MN ATSAMD20E14A-ANT ATSAMD20G14A-AU SAM D20 ARM Cortex-M0+ ARM Cortex-M0+ processor core 32-bit microcontroller flash microcontroller embedded microcontroller 16 KB flash memory 2 KB SRAM 48 MHz TQFP-32 7 x 7 mm surface-mount package home automation industrial sensing smart metering RoHS low-power embedded control
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ