Microchip Technology

ATSAMD20E14A-AU - 48MHz Cortex-M0+ MCU | Microchip

MPN: ATSAMD20E14A-AU ✓ Nakahanda
1.62 V to 3.6 V Vdss 32-pin TQFP, 7 x 7 mm Package 48 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

ATSAMD20E14A-AU Ulas

The Microchip Technology ATSAMD20E14A-AU is a low-power, 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, with 16 KB of flash memory, 2 KB of SRAM, and a 32-pin TQFP package measuring 7 x 7 mm. It combines a compact general-purpose MCU architecture with embedded flash for compact control, sensing, metering, and automation products.

A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and input/output interfaces onto one chip. The ARM Cortex-M0+ core uses the Thumb instruction set and is designed for efficient embedded control. Within the product hierarchy, the ATSAMD20E14A-AU is an ARM Cortex-M0+ MCU, part of the SAM D20 family, and a member of Microchip's embedded microcontrollers and semiconductor portfolio.

Key features include a maximum clock frequency of 48 MHz, 16 KB of flash, 2 KB of SRAM, and integrated programmable I/O capabilities suited to embedded control. The single-core 32-bit architecture provides sufficient processing performance for protocol handling, digital control, low-rate data acquisition, and user-interface logic without requiring a larger system-on-chip. Its 32-TQFP package also supports conventional PCB assembly and external test access.

The ATSAMD20E14A-AU is positioned as a low-power solution for home automation, consumer products, metering, and industrial applications. Its Cortex-M0+ core provides a common instruction set and efficient code density, while the 16 KB flash budget supports compact boot logic and application firmware. With 2 KB of SRAM, designers must manage buffering and avoid allocating large static or dynamic memory structures simultaneously.

Typical deployments include connected home devices, utility and resource meters, compact sensor controllers, industrial monitoring modules, and low-cost consumer controls. The device can coordinate digital inputs, sensor interfaces, communication peripherals, and actuator outputs while maintaining a small footprint. Its operating voltage range is identified as 1.62 V to 3.6 V, making it appropriate for low-voltage embedded systems designed around 3.3 V rails.

A primary design consideration is memory sizing. Firmware overhead, bootloader code, stack depth, interrupt handlers, and data buffers must fit within 16 KB of flash and 2 KB of SRAM. Place required bypass capacitors near the power pins, route sensitive signals away from switching nodes, and follow the manufacturer's pin-description and recommended-circuit diagrams when assigning the 32 TQFP lands.

This page combines manufacturer specifications, verified sourcing information, pin-compatible family alternatives, application guidance, and practical design notes to support faster component selection and PCB implementation. It also distinguishes electrical and package characteristics that require confirmation before treating a related device as a production replacement.

Mga alternatibo na pwedeng ilagay na ATSAMD20E14A-AU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ATSAMD20E14A-AU (parehas na form factor at footprint) — pagkakaiba sa Package, ADC, RTC, DAC, Program Memory (Flash).

Microchip Technology
Package: 32-TQFP (7x7 mm)
RTC: 32 kHz with calendar
DAC: 10-bit
Ikabit sa ATSAMD20E14A-AU →
Microchip Technology
Package: 32-VQFN (5x5 mm) with Exposed Pad
ADC: 12-bit, up to 10 channels, 350 kSPS
RTC: Yes, 32.768 kHz support
Ikabit sa ATSAMD20E14A-AU →
Microchip Technology
ADC: 12-bit, up to 350 ksps, up to 10 channels
RTC: 32 kHz, with calendar
DAC: 10-bit, 350 ksps
Ikabit sa ATSAMD20E14A-AU →
Microchip Technology
Package: 32-pin TQFP (7x7 mm)
ADC: 12-bit, up to 350 ksps
DAC: 10-bit, 350 ksps
Ikabit sa ATSAMD20E14A-AU →
Microchip Technology
Package: 32-TQFP (7x7 mm)
ADC: 12-bit, up to 20 channels
DAC: 10-bit, 1 channel
Ikabit sa ATSAMD20E14A-AU →
Microchip Technology
Package: 48-TQFP (7x7 mm)
Ikabit sa ATSAMD20E14A-AU →
Microchip Technology
Package: 48-VFQFN Exposed Pad (7x7 mm)
ADC: 12-bit, up to 350 ksps
RTC: 32 kHz internal RTC
Ikabit sa ATSAMD20E14A-AU →

ATSAMD20E14B-AU

✅ Drop-In
Microchip Technology
📦 32-TQFP (7 x 7 mm)
ARM Cortex-M0+ (32-bit) · SAM D20E · 48 MHz · 16 KB (16K x 8) · 2 KB · 1.62 V to 3.63 V · -40 C to +85 C (Industrial) · 32-pin TQFP (7x7 mm)

Magkontak para sa presyo

Tingnan ang Datasheet →

ATSAMD20E14A-MU

✅ Drop-In
Microchip Technology
📦 32-TQFP (7 x 7 mm)
Microchip Technology (formerly Atmel) · SAM D20 · ARM Cortex-M0+ (32-bit) · 48 MHz · 2.14 · 16 KB (16K x 8) · 2 KB · 1.62 V to 3.63 V

Magkontak para sa presyo

Tingnan ang Datasheet →

ATSAMD20E14A-MNT

✅ Drop-In
Microchip Technology
📦 32-TQFP (7 x 7 mm)
ARM Cortex-M0+ (32-bit) · SAM D20E · 48 MHz · 16 KB · 2 KB · 1.62 V to 3.63 V · 2.14 · -40 C to +105 C

Magkontak para sa presyo

Tingnan ang Datasheet →

ATSAMD20E14A-ANT

✅ Drop-In
📦 32-TQFP (7 x 7 mm)
The 32-bit Cortex-M0+ core, 48 MHz clock, 16 KB flash and 2 KB SRAM match; the ordering suffix differs by 0 in core, memory, and speed.

📋 Alternatibo na Reference (hindi sa katalogo)

ATSAMD20G14A-AUT

✅ Drop-In
Microchip Technology
📦 32-TQFP (7 x 7 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 16 KB (16K x 8) · 2 KB · 1.62 V to 3.63 V · 48-TQFP (7x7 mm)

Magkontak para sa presyo

Tingnan ang Datasheet →

ATSAMD20E14A-AU Mga Pinakamataas na Rating at Electrical Characteristics

Product Type ARM Cortex-M0+ Flash Microcontroller
Product Family SAM D20
Processor Core Single-core ARM Cortex-M0+
Architecture 32-bit
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB (16K x 8)
SRAM 2 KB
Operating Voltage Range 1.62 V to 3.6 V
Packhaging 32-pin TQFP, 7 x 7 mm
Uri ng Pagpapasok Surface Mount
Program Memory Type Flash
Tindminan RoHS Compliant

Gabay sa Pin Configuration ng ATSAMD20E14A-AU 32-pin tqfp, 7 x 7 mm

Pin configuration para sa ATSAMD20E14A-AU (32-pin tqfp, 7 x 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 32-pin tqfp, 7 x 7 mm package para sa ATSAMD20E14A-AU

Wala ng detalyadong pinout data na magagamit para sa ATSAMD20E14A-AU.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ATSAMD20E14A-AU ay nararapat para sa 6 aplikasyons: Home Automation Controller, Smart Metering Module, Industrial Sensor Interface, Consumer Appliance Control, Connected Equipment Node, Data Acquisition and Control.

🧩

Home Automation Controller

The ATSAMD20E14A-AU fits compact home-automation modules that combine digital inputs, relay or LED outputs, and low-speed serial communications. Its 48 MHz ARM Cortex-M0+ core provides sufficient control throughput for protocol handling and debounce logic, while 16 KB of flash stores the application and 2 KB of SRAM supports short communication buffers. The 32-TQFP footprint preserves board area, and the 1.62 V to 3.6 V operating range accommodates low-voltage 3.3 V systems. Firmware should limit simultaneous buffers because the available SRAM is only 2 KB.

⚡

Smart Metering Module

The ATSAMD20E14A-AU is suitable for metering and energy-monitoring modules that acquire periodic sensor readings, apply calibration, and transmit results. Its Cortex-M0+ processor can execute measurement scheduling, filtering, and compact communication firmware at up to 48 MHz. The 16 KB flash is appropriate for a focused meter application rather than a large protocol stack, while 2 KB of SRAM can hold sampled values and a limited packet buffer. Its low-voltage operation supports compact battery-assisted or line-powered designs with carefully controlled quiescent behavior.

🏭

Industrial Sensor Interface

The ATSAMD20E14A-AU can serve as the local controller for industrial sensors that digitize measurements, apply thresholds, and report status through a serial interface. At 48 MHz, the Cortex-M0+ core provides ample performance for digital filtering and control without requiring an external processor. The 16 KB flash and 2 KB SRAM require disciplined buffer allocation, especially when handling simultaneous sensor channels. The 32-pin TQFP package provides a conventional surface-mount footprint, and the 1.62 V to 3.6 V range supports compatible industrial interface circuitry.

📱

Consumer Appliance Control

The ATSAMD20E14A-AU is appropriate for compact consumer appliances and controls that coordinate buttons, displays, indicators, and external actuators. Its efficient 32-bit Cortex-M0+ architecture supports responsive state-machine control, timing, and serial peripheral management. Firmware and interrupt routines must fit within 16 KB of flash, while the 2 KB SRAM limits temporary buffering and encourages event-driven design. The low 1.62 V minimum operating voltage provides flexibility around low-voltage internal rails, and the 7 x 7 mm TQFP package reduces PCB footprint.

🌐

Connected Equipment Node

The ATSAMD20E14A-AU can act as a connected equipment node that samples machine state, detects events, and forwards compact diagnostic records. The 48 MHz Cortex-M0+ core can manage interrupts, timers, and lightweight serial protocols while the 16 KB flash stores a dedicated application. Because SRAM is limited to 2 KB, the design should avoid large frame buffers and process data incrementally. The 32-TQFP package allows integration into dense equipment-control boards, and the 1.62 V to 3.6 V range supports common embedded voltage rails.

🖥️

Data Acquisition and Control

The ATSAMD20E14A-AU is useful for small data-acquisition and control subsystems that sequence analog or digital measurements and coordinate outputs. Its 48 MHz Cortex-M0+ core can manage sampling timers, basic filtering, and control logic, while 16 KB of flash accommodates targeted application code. The 2 KB SRAM supports transient sample and status storage but not large histories. Designers should use the manufacturer's pin-description table for analog-capable pins and place input filtering and supply-decoupling components according to the recommended application circuit.

Buod ng mga Inirekomendang Produkto

ATSAMD20E14B-AU Microchip Technology Ginagamit sa: Home Automation Controller, Industrial Sensor Interface, Connected Equipment Node ATSAMD20G14A-AU 48 MHz SAM D20 family alternative Ginagamit sa: Home Automation Controller, Industrial Sensor Interface, Connected Equipment Node ATSAMD20E14A-MU Microchip Technology Ginagamit sa: Smart Metering Module, Consumer Appliance Control, Data Acquisition and Control ATSAMD20E14A-MN Same-family SAM D20 controller Ginagamit sa: Smart Metering Module, Data Acquisition and Control ATSAMD20E14A-ANT Related SAM D20 ordering option Ginagamit sa: Consumer Appliance Control
What are the key specifications of ATSAMD20E14A-AU that engineers should know?
The ATSAMD20E14A-AU combines a 32-bit ARM Cortex-M0+ core, 48 MHz maximum operating frequency, 16 KB of flash, 2 KB of SRAM, and a 32-pin 7 x 7 mm TQFP package. According to the Microchip ATSAMD20E14 product page, it is a low-power flash microcontroller intended for home automation, consumer, metering, and industrial products. Its 1.62 V to 3.6 V operating range supports compact, low-voltage embedded systems.
What is ATSAMD20E14A-AU and what is it used for?
The ATSAMD20E14A-AU is a low-power, 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20 family. According to Microchip's product page, it provides 16 KB of flash, 2 KB of SRAM, and operation up to 48 MHz. It is intended for home automation, consumer equipment, metering, and industrial applications where a compact controller is needed to coordinate sensors, communications, digital inputs, and actuator outputs.
What is the operating voltage range of ATSAMD20E14A-AU?
The ATSAMD20E14A-AU operates from 1.62 V to 3.6 V. This low-voltage range allows use with 3.3 V embedded systems and compatible lower-voltage power designs. According to the Microchip ATSAMD20E14 product page, the device belongs to the low-power SAM D20 family. Confirm the selected clock configuration, peripherals, and I/O voltage limits against the manufacturer datasheet before applying the full voltage range to every interface.
How much flash and SRAM does ATSAMD20E14A-AU have?
The ATSAMD20E14A-AU has 16 KB of flash memory and 2 KB of SRAM. According to the Microchip product page and distributor specifications, flash is organized as 16K x 8 and supports embedded program storage. The 2 KB SRAM is modest, so application firmware should account for stack usage, buffered measurements, communication frames, and any operating-system overhead rather than treating the full memory capacity as freely available.
Where can I download the ATSAMD20E14A-AU datasheet PDF?
The ATSAMD20E14A-AU datasheet PDF is available from the manufacturer product documentation and the Atmel document listing linked on this page. The manufacturer product page is https://www.microchip.com/en-us/product/ATSAMD20E14, while a PDF entry appears at https://www.alldatasheet.com/datasheet-pdf/pdf/554411/ATMEL/ATSAMD20E14A-AU.html. Use the manufacturer copy for final design, pin, electrical, and errata decisions.
Where can I find the ATSAMD20E14A-AU pinout and TQFP-32 land pattern?
The ATSAMD20E14A-AU uses a 32-pin TQFP package measuring 7 x 7 mm, and its complete pin assignment is shown in the manufacturer pin-description table. The product documentation is linked through https://www.microchip.com/en-us/product/ATSAMD20E14. Use that table for PCB land assignment, power-pin placement, programming access, and exposed test points; the package drawing also identifies pin-1 orientation.
Where can I buy ATSAMD20E14A-AU online?
The ATSAMD20E14A-AU can be requested through the Request a Quote form on this page for current commercial availability, lot conditions, and delivery planning. The manufacturer identifies the device as an active SAM D20 product, and distributor listings include the exact 32-TQFP ordering code. Use the quote form to obtain a current response rather than relying on a static listing or an unconfirmed inventory count.
What is the price of ATSAMD20E14A-AU?
Current ATSAMD20E14A-AU commercial pricing depends on quantity, sourcing channel, and order conditions. Use the Request a Quote form on this page to request the applicable unit price and quantity breaks for the exact 32-TQFP ordering code. The form is also the appropriate route for checking scheduled deliveries because market prices and inventory can change independently of the component's technical specifications.
What is the lead time for ATSAMD20E14A-AU?
The ATSAMD20E14A-AU lead time should be confirmed for the required quantity through the Request a Quote form on this page. The component is listed as active and is distributed as a standard catalog part, but actual delivery scheduling depends on stock position, manufacturing plans, package choice, and purchase volume. Providing the exact MPN, target quantity, and destination country enables a more useful quotation response.
Is ATSAMD20E14A-AU in stock?
ATSAMD20E14A-AU is listed as an active product, but live stock should not be inferred from a general search listing. Use the Request a Quote form on this page to request current availability for the exact MPN and quantity. This is particularly important for scheduled production because distributor inventory can change independently of lifecycle status, while larger orders may require a manufacturer allocation rather than consumption of spot stock.
What is the best drop-in replacement for ATSAMD20E14A-AU?
The closest replacement depends on whether memory, temperature grade, and qualification requirements remain unchanged. ATSAMD20E14B-AU and selected ATSAMD20E14A package variants can share the 32-TQFP SAM D20 architecture, but each suffix must be checked for temperature, packing, and ordering-code differences. The ATSAMD20G14A-AU is another 48 MHz Cortex-M0+ family option, although its configuration differs. Confirm pin, memory, clock, and qualification compatibility before replacement.
Can ATSAMD20E14A-MU replace ATSAMD20E14A-AU?
ATSAMD20E14A-MU is a closely related Microchip SAM D20 device and may satisfy the same footprint and core requirements, but the ordering suffix must be checked before substitution. Both devices are associated with the 32-bit Cortex-M0+ SAM D20 family, while the suffix can identify temperature-range or packing differences. Use the manufacturer pin and ordering tables to confirm that 16 KB flash, 2 KB SRAM, 48 MHz operation, and all required peripheral functions remain unchanged.
ATSAMD20E14A-AU vs ATSAMD20G14A-AU: which is better for a low-cost controller?
Choose ATSAMD20E14A-AU when its 16 KB flash and 2 KB SRAM match the established design exactly. ATSAMD20G14A-AU is also described as a 48 MHz, ARM Cortex-M0+, low-power SAM D20 device, but its peripheral and memory configuration should be compared with the target before substitution. The correct choice depends on which device matches the required I/O mix, memory footprint, voltage behavior, and qualification conditions rather than package appearance alone.
When should I choose ATSAMD20E14A-AU over ATSAMD20E14B-AU?
Choose ATSAMD20E14A-AU when the design is already qualified around the original ordering code and its 16 KB flash, 2 KB SRAM, and 48 MHz Cortex-M0+ configuration. ATSAMD20E14B-AU may be preferable only when its manufacturer-defined revision, qualification, or temperature characteristics provide a needed benefit without changing the application. Review the ordering information and device revision notes before moving a production design to the B suffix.
What is the best Microchip equivalent for ATSAMD20E14A-AU?
The best Microchip equivalent is the device whose 32-TQFP pinout, 16 KB flash, 2 KB SRAM, 48 MHz Cortex-M0+ performance, voltage range, and temperature requirements all match the original. ATSAMD20E14B-AU is the primary same-family candidate to evaluate, while ATSAMD20E14A-MU and ATSAMD20G14A-AU may suit particular ordering or configuration needs. A valid drop-in decision must be based on the manufacturer's device comparison rather than functional similarity alone.

Impormasyon ng Talumpati sa Engineering for ATSAMD20E14A-AU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ATSAMD20E14A-AU for compact embedded-control designs requiring a 48 MHz ARM Cortex-M0+ core, 16 KB of flash, 2 KB of SRAM, and a 32-TQFP footprint. It is particularly suitable for home automation, metering, consumer control, and industrial sensor modules whose firmware fits the modest memory budget. ATSAMD20E14B-AU is the closest same-family candidate to evaluate when a later revision provides a useful qualification or product-lifecycle benefit. ATSAMD20E14A-MU, ATSAMD20E14A-MN, and ATSAMD20E14A-ANT preserve the core speed and memory class but require ordering-suffix review for temperature, packing, or qualification differences. ATSAMD20G14A-AU may suit a comparable low-power design when its specific peripheral and memory configuration is acceptable. No verified cross-brand drop-in candidate was established. Before production substitution, compare every pin, peripheral, voltage, temperature, programming, and qualification requirement against the manufacturer documentation.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ATSAMD20E14B-AU ATSAMD20E14A-MU ATSAMD20E14A-MN ATSAMD20E14A-ANT ATSAMD20G14A-AU
Package 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm) 32-TQFP (7 x 7 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Architecture 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz

Pangunahing mga Pagkakaiba

  • Compact low-power Cortex-M0+ implementation (kumpara saATSAMD20G14A-AU)
  • Established A-series ordering configuration (kumpara saATSAMD20E14B-AU)
  • Direct SAM D20 family fit for low-cost controls (kumpara saATSAMD20E14A-MU)

Talaan ng Disenyo

Assign all 32 lands from the manufacturer's pin-description table and preserve the TQFP-32 footprint orientation. Place the required supply-bypass capacitors next to their associated power pins, keep the ground return path short, and provide accessible programming and reset connections. The 7 x 7 mm package leaves little room for routing errors, so verify pin-1 orientation and paste-land symmetry against the package drawing before releasing the PCB.

Design the power tree for the documented 1.62 V to 3.6 V operating range and ensure that every external signal remains within its permitted voltage domain. Use local decoupling at the MCU supply pins and isolate analog or communication interfaces from noisy switching nodes. The 48 MHz operating rate does not eliminate dynamic-current demand, so include sufficient source capability and verify the power-supply transient response with realistic peripheral activity.

Budget firmware and SRAM carefully: the ATSAMD20E14A-AU provides only 16 KB of flash and 2 KB of SRAM. Include startup code, interrupt handlers, stack headroom, library overhead, and protocol buffers in the memory plan. Avoid unbounded queues and large local arrays, and measure the application's highest stack depth under interrupts. A device can compile and boot correctly yet fail later when a communication buffer consumes the remaining SRAM.

Follow the manufacturer's recommended application circuit for clock stability, decoupling, and external component placement. Keep sensitive measurement inputs away from switching supplies and high-current outputs, maintain short return paths, and use a continuous ground reference beneath the device where layout rules permit. If using analog-capable pins for metering or sensing, confirm their multiplexed functions and acquisition requirements in the pin table rather than treating every general-purpose I/O as equivalent.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

RoHS compliance is indicated by the component listing. No manufacturer statement confirming REACH, lead-free status, halogen-free status, conflict-minerals compliance, or automotive qualification was available for this exact ordering code.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ATSAMD20E14A-AU ATSAMD20E14A-AU datasheet ATSAMD20E14A-AU datasheet pdf ATSAMD20E14A-AU pinout ATSAMD20E14A-AU equivalent ATSAMD20E14A-AU replacement ATSAMD20E14A-AU price ATSAMD20E14A-AU stock ATSAMD20E14A-AU TQFP-32 footprint ATSAMD20E14A-AU vs ATSAMD20E14B-AU ATSAMD20E14A-AU application circuit Microchip ATSAMD20E14A-AU

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology ATSAMD20E14A-AU ATSAMD20E14 ATSAMD20E14B-AU ATSAMD20E14A-MU ATSAMD20E14A-MN ATSAMD20E14A-ANT ATSAMD20G14A-AU SAM D20 ARM Cortex-M0+ ARM Cortex-M0+ processor core 32-bit microcontroller flash microcontroller embedded microcontroller 16 KB flash memory 2 KB SRAM 48 MHz TQFP-32 7 x 7 mm surface-mount package home automation industrial sensing smart metering RoHS low-power embedded control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ