ATSAMD20E14A-AU - 48MHz Cortex-M0+ MCU | Microchip
部品番号: ATSAMD20E14A-AU ✓ 生産中ATSAMD20E14A-AU 概要
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and input/output interfaces onto one chip. The ARM Cortex-M0+ core uses the Thumb instruction set and is designed for efficient embedded control. Within the product hierarchy, the ATSAMD20E14A-AU is an ARM Cortex-M0+ MCU, part of the SAM D20 family, and a member of Microchip's embedded microcontrollers and semiconductor portfolio.
Key features include a maximum clock frequency of 48 MHz, 16 KB of flash, 2 KB of SRAM, and integrated programmable I/O capabilities suited to embedded control. The single-core 32-bit architecture provides sufficient processing performance for protocol handling, digital control, low-rate data acquisition, and user-interface logic without requiring a larger system-on-chip. Its 32-TQFP package also supports conventional PCB assembly and external test access.
The ATSAMD20E14A-AU is positioned as a low-power solution for home automation, consumer products, metering, and industrial applications. Its Cortex-M0+ core provides a common instruction set and efficient code density, while the 16 KB flash budget supports compact boot logic and application firmware. With 2 KB of SRAM, designers must manage buffering and avoid allocating large static or dynamic memory structures simultaneously.
Typical deployments include connected home devices, utility and resource meters, compact sensor controllers, industrial monitoring modules, and low-cost consumer controls. The device can coordinate digital inputs, sensor interfaces, communication peripherals, and actuator outputs while maintaining a small footprint. Its operating voltage range is identified as 1.62 V to 3.6 V, making it appropriate for low-voltage embedded systems designed around 3.3 V rails.
A primary design consideration is memory sizing. Firmware overhead, bootloader code, stack depth, interrupt handlers, and data buffers must fit within 16 KB of flash and 2 KB of SRAM. Place required bypass capacitors near the power pins, route sensitive signals away from switching nodes, and follow the manufacturer's pin-description and recommended-circuit diagrams when assigning the 32 TQFP lands.
This page combines manufacturer specifications, verified sourcing information, pin-compatible family alternatives, application guidance, and practical design notes to support faster component selection and PCB implementation. It also distinguishes electrical and package characteristics that require confirmation before treating a related device as a production replacement.
ドロップイン代替品: ATSAMD20E14A-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAMD20E14A-AU (同一形状・フットプリント) — 相違点: Package, ADC, RTC, DAC, Program Memory (Flash).
ATSAMD20E14B-AU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD20E14A-MU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD20E14A-MNT
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD20E14A-ANT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMD20G14A-AUT
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATSAMD20E14A-AU 最大定格&電気的特性
| Product Type | ARM Cortex-M0+ Flash Microcontroller |
| Product Family | SAM D20 |
| Processor Core | Single-core ARM Cortex-M0+ |
| Architecture | 32-bit |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB (16K x 8) |
| SRAM | 2 KB |
| Operating Voltage Range | 1.62 V to 3.6 V |
| パッケージ | 32-pin TQFP, 7 x 7 mm |
| 実装タイプ | Surface Mount |
| Program Memory Type | Flash |
| RoHS ステータス | Compliant |
ATSAMD20E14A-AU 32-pin tqfp, 7 x 7 mm ピン配置ガイド
ATSAMD20E14A-AU (32-pin tqfp, 7 x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAMD20E14A-AU.
詳細は データシート をご参照ください。
主な用途
ATSAMD20E14A-AU の用途: 6 件s: Home Automation Controller, Smart Metering Module, Industrial Sensor Interface, Consumer Appliance Control, Connected Equipment Node, Data Acquisition and Control.
Home Automation Controller
The ATSAMD20E14A-AU fits compact home-automation modules that combine digital inputs, relay or LED outputs, and low-speed serial communications. Its 48 MHz ARM Cortex-M0+ core provides sufficient control throughput for protocol handling and debounce logic, while 16 KB of flash stores the application and 2 KB of SRAM supports short communication buffers. The 32-TQFP footprint preserves board area, and the 1.62 V to 3.6 V operating range accommodates low-voltage 3.3 V systems. Firmware should limit simultaneous buffers because the available SRAM is only 2 KB.
おすすめ
Smart Metering Module
The ATSAMD20E14A-AU is suitable for metering and energy-monitoring modules that acquire periodic sensor readings, apply calibration, and transmit results. Its Cortex-M0+ processor can execute measurement scheduling, filtering, and compact communication firmware at up to 48 MHz. The 16 KB flash is appropriate for a focused meter application rather than a large protocol stack, while 2 KB of SRAM can hold sampled values and a limited packet buffer. Its low-voltage operation supports compact battery-assisted or line-powered designs with carefully controlled quiescent behavior.
おすすめ
Industrial Sensor Interface
The ATSAMD20E14A-AU can serve as the local controller for industrial sensors that digitize measurements, apply thresholds, and report status through a serial interface. At 48 MHz, the Cortex-M0+ core provides ample performance for digital filtering and control without requiring an external processor. The 16 KB flash and 2 KB SRAM require disciplined buffer allocation, especially when handling simultaneous sensor channels. The 32-pin TQFP package provides a conventional surface-mount footprint, and the 1.62 V to 3.6 V range supports compatible industrial interface circuitry.
おすすめ
Consumer Appliance Control
The ATSAMD20E14A-AU is appropriate for compact consumer appliances and controls that coordinate buttons, displays, indicators, and external actuators. Its efficient 32-bit Cortex-M0+ architecture supports responsive state-machine control, timing, and serial peripheral management. Firmware and interrupt routines must fit within 16 KB of flash, while the 2 KB SRAM limits temporary buffering and encourages event-driven design. The low 1.62 V minimum operating voltage provides flexibility around low-voltage internal rails, and the 7 x 7 mm TQFP package reduces PCB footprint.
おすすめ
Connected Equipment Node
The ATSAMD20E14A-AU can act as a connected equipment node that samples machine state, detects events, and forwards compact diagnostic records. The 48 MHz Cortex-M0+ core can manage interrupts, timers, and lightweight serial protocols while the 16 KB flash stores a dedicated application. Because SRAM is limited to 2 KB, the design should avoid large frame buffers and process data incrementally. The 32-TQFP package allows integration into dense equipment-control boards, and the 1.62 V to 3.6 V range supports common embedded voltage rails.
おすすめ
Data Acquisition and Control
The ATSAMD20E14A-AU is useful for small data-acquisition and control subsystems that sequence analog or digital measurements and coordinate outputs. Its 48 MHz Cortex-M0+ core can manage sampling timers, basic filtering, and control logic, while 16 KB of flash accommodates targeted application code. The 2 KB SRAM supports transient sample and status storage but not large histories. Designers should use the manufacturer's pin-description table for analog-capable pins and place input filtering and supply-decoupling components according to the recommended application circuit.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAMD20E14A-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAMD20E14B-AU | ATSAMD20E14A-MU | ATSAMD20E14A-MN | ATSAMD20E14A-ANT | ATSAMD20G14A-AU |
|---|---|---|---|---|---|---|
| Package | 32-TQFP (7 x 7 mm) | 32-TQFP (7 x 7 mm) | 32-TQFP (7 x 7 mm) | 32-TQFP (7 x 7 mm) | 32-TQFP (7 x 7 mm) | 32-TQFP (7 x 7 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
主な差別化要因
- Compact low-power Cortex-M0+ implementation (vs ATSAMD20G14A-AU)
- Established A-series ordering configuration (vs ATSAMD20E14B-AU)
- Direct SAM D20 family fit for low-cost controls (vs ATSAMD20E14A-MU)
設計ノート
Assign all 32 lands from the manufacturer's pin-description table and preserve the TQFP-32 footprint orientation. Place the required supply-bypass capacitors next to their associated power pins, keep the ground return path short, and provide accessible programming and reset connections. The 7 x 7 mm package leaves little room for routing errors, so verify pin-1 orientation and paste-land symmetry against the package drawing before releasing the PCB.
Design the power tree for the documented 1.62 V to 3.6 V operating range and ensure that every external signal remains within its permitted voltage domain. Use local decoupling at the MCU supply pins and isolate analog or communication interfaces from noisy switching nodes. The 48 MHz operating rate does not eliminate dynamic-current demand, so include sufficient source capability and verify the power-supply transient response with realistic peripheral activity.
Budget firmware and SRAM carefully: the ATSAMD20E14A-AU provides only 16 KB of flash and 2 KB of SRAM. Include startup code, interrupt handlers, stack headroom, library overhead, and protocol buffers in the memory plan. Avoid unbounded queues and large local arrays, and measure the application's highest stack depth under interrupts. A device can compile and boot correctly yet fail later when a communication buffer consumes the remaining SRAM.
Follow the manufacturer's recommended application circuit for clock stability, decoupling, and external component placement. Keep sensitive measurement inputs away from switching supplies and high-current outputs, maintain short return paths, and use a continuous ground reference beneath the device where layout rules permit. If using analog-capable pins for metering or sensing, confirm their multiplexed functions and acquisition requirements in the pin table rather than treating every general-purpose I/O as equivalent.
コンプライアンス情報
RoHS compliance is indicated by the component listing. No manufacturer statement confirming REACH, lead-free status, halogen-free status, conflict-minerals compliance, or automotive qualification was available for this exact ordering code.