Microchip Technology

ATTINY824-SSU - 20MHz 8KB AVR Microcontroller | Microchip

부품 번호: ATTINY824-SSU ✓ 활성
1.8 V to 5.5 V Vdss 14-pin SOIC Package 20 MHz Speed 8 KB Memory
MOQ: 1 |

ATTINY824-SSU 개요

The Microchip Technology ATTINY824-SSU is an 8-bit AVR tinyAVR 2 microcontroller operating up to 20 MHz, with 8 KB of in-system programmable Flash, 1 KB SRAM, 128 bytes of EEPROM, and 12 I/O pins in a 14-pin SOIC package. It combines an AVR CPU with a hardware multiplier and core-independent peripherals in a compact embedded-control device.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, digital I/O, and peripherals on one die. The ATTINY824 belongs to the tinyAVR 2 family, a low-power 8-bit branch of the AVR microcontroller architecture. Engineers use this class of device for compact control tasks where small package size, simple firmware, and deterministic peripheral operation are more important than the processing power of a higher-bit-field MCU.

The device provides 8 KB of Flash for program storage, 1 KB of SRAM for working data, and 128 bytes of EEPROM for nonvolatile parameter retention. Its 20 MHz maximum clock rate supports responsive control loops, while 12 I/O pins provide access to digital interfaces and external circuitry. According to the manufacturer product page, the family is available in 14-pin TSSOP and SOIC packages, with the ATTINY824-SSU specifically using the 14-pin SOIC format.

Program storage uses in-system reprogrammable Flash organized into pages for AVR instruction storage. The architecture includes I2C, SPI, and UART/USART connectivity, allowing the microcontroller to communicate with sensors, serial memories, transceivers, and host systems. Its mix of embedded communications and general-purpose I/O makes it suitable for compact peripheral controllers rather than general desktop processing.

Typical uses include industrial sensor nodes, compact motor and actuator controllers, building or access-control peripherals, communication bridges, and low-power embedded instrumentation. Designers can connect the serial interfaces to external sensors or transceivers while using the GPIO for status indicators, switches, relays, or data acquisition inputs.

The main design consideration is pin and power planning. Confirm the complete 14-pin SOIC pin assignment, decoupling requirements, clock configuration, programming interface, and operating-voltage limits in the manufacturer data sheet before layout. Preserve access to the programming signals and route sensitive serial or analog inputs away from fast-switching nodes.

This product page combines the manufacturer specifications, package information, sourcing guidance, functional comparisons, and practical design notes in one engineering-focused view. It supports faster part selection while highlighting the memory, clock, interface, package, and replacement considerations that determine whether ATTINY824-SSU fits a specific embedded-control design.

드롭인 대체품: ATTINY824-SSU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ATTINY824-SSU (동일 폼 팩터 및 풋프린트) — 차이점: EEPROM, Package, SRAM.

Microchip Technology
EEPROM: 256 B
Package: 14-pin SOIC (SOIC-14, narrow body, 0.150")
SRAM: 2 KB
비교 대상: ATTINY824-SSU →

ATTINY424-SSU

✅ 드롭인 ⚠️ 사양 미검증
📦 14-SOIC
Flash memory is 4 KB versus 8 KB, a 50% reduction; CPU and package family remain compatible

📋 참조 대체품 (카탈로그에 없음)

ATTINY426-SSU

✅ 드롭인 ⚠️ 사양 미검증
📦 14-SOIC
Flash memory is 4 KB versus 8 KB, a 50% reduction; verify differing peripheral pin functions before substitution

📋 참조 대체품 (카탈로그에 없음)

ATTINY827-SSU

✅ 드롭인 ⚠️ 사양 미검증
📦 14-SOIC
Flash memory remains 8 KB, while family-specific peripheral functions and timing requirements must be checked

📋 참조 대체품 (카탈로그에 없음)

ATTINY824-SSU 최대 정격 & 전기적 특성

Product Type 8-bit AVR tinyAVR 2 microcontroller
Maximum CPU Frequency 20 MHz
Flash Memory 8 KB
Flash Organization 4K x 16-bit pages
SRAM 1 KB
EEPROM 128 bytes
General-Purpose I/O Pins 12 pins
Operating Voltage Range 1.8 V to 5.5 V
CPU Architecture AVR with hardware multiplier
Instruction Word Width 16-bit or 32-bit
Serial Interfaces I2C, SPI, UART/USART
패키지 14-pin SOIC
실장 유형 Surface mount
Industrial Temperature Grade Up to 85 °C
Green Design Green
Program Memory Type In-system programmable Flash

ATTINY824-SSU 14-pin soic 핀 구성 가이드

ATTINY824-SSU(14-pin soic 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATTINY824-SSU의 14-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATTINY824-SSU.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATTINY824-SSU 적합 용도: 6 애플리케이션s: Industrial Sensor Node, Compact Communication Bridge, Low-Power Actuator Controller, Access Control Peripheral, Portable Measurement Module, LED and Indicator Control.

🏭

Industrial Sensor Node

The ATTINY824-SSU fits an industrial sensor node that must acquire local measurements and forward them over a short serial link. Its 20 MHz AVR core provides processing headroom for filtering and status logic, while 8 KB of Flash accommodates application firmware and 1 KB of SRAM supports temporary measurement buffers. I2C can connect a digital sensor, SPI can serve a serial memory or radio device, and UART/USART can provide a diagnostic or uplink path. The 14-pin SOIC package also offers enough pins for sensor control, status LEDs, and an optional actuator output. For industrial deployment, use the exact ATTINY824-SSU temperature grade, provide regulated input power across the 1.8 V to 5.5 V range, and keep communication and sensor traces away from high-current switching nodes.

🌐

Compact Communication Bridge

ATTINY824-SSU is appropriate for a small protocol-conversion or sensor-hub bridge because it combines three serial interfaces with 8 KB of program memory. A 20 MHz AVR core can manage simultaneous sensor polling, frame formatting, and host communication, while the hardware multiplier supports common multiply operations in filtering and protocol calculations. The 1 KB SRAM is sufficient for modest packet staging, and 128 bytes of EEPROM can retain calibration or configuration values when the firmware supports nonvolatile updates. Use I2C for short-distance peripheral connections, SPI for faster external devices, and UART/USART for the host link. The main design check is the complete 14-pin assignment: communications, power, reset, clock, and programming pins must all be considered before assigning the remaining GPIO.

⚡

Low-Power Actuator Controller

The ATTINY824-SSU can control a compact relay, valve, motor, or actuator subsystem where firmware size and I/O density are more important than high arithmetic throughput. Its 12 I/O pins can support digital inputs, switch status, pulse outputs, and fault signaling, while 8 KB of Flash provides room for state-machine logic, timing, debouncing, and safety checks. PWM-capable timer resources can be useful for motor or valve drive functions when the required peripheral mapping is confirmed in the device documentation. The 1.8 V to 5.5 V operating range supports common embedded supply systems. Designers should calculate driver-transistor dissipation separately from the MCU, include flyback protection for inductive loads, and keep high-current switching paths physically separated from the microcontroller and its serial interfaces.

🔒

Access Control Peripheral

ATTINY824-SSU suits an access-control peripheral that coordinates a reader, lock relay, keypad, and status indicator. The 20 MHz core can scan inputs and manage debounce and timing logic, while the 8 KB Flash capacity accommodates protocol and state-machine code. I2C or SPI can interface with an external secure element or reader controller, and UART/USART can support a higher-level controller. The controller can also retain small configuration values in its 128-byte EEPROM. The 14-pin SOIC footprint provides a practical balance between pin count and board area, although every available signal must be allocated carefully when reading a bus, driving a lock, and retaining communications. Validate fail-safe behavior, relay isolation, debounce timing, and power-loss recovery before production deployment.

📱

Portable Measurement Module

The ATTINY824-SSU is useful in a portable measurement module where compactness, low supply voltage, and local control are important. Its 1.8 V minimum operating voltage supports energy-conscious designs, while the 20 MHz core provides enough throughput for sensor configuration and basic signal conditioning. The 8 KB Flash stores firmware and lookup tables, 1 KB of SRAM holds recent samples, and the serial interfaces allow connection to sensors, storage, or a host. The 14-pin SOIC package can be assembled on a compact board while leaving accessible pins for programming and diagnostics. Because battery-powered equipment is sensitive to board leakage, evaluate MCU sleep modes, pull-up values, external sensor current, and regulator quiescent current. Confirm the final low-power behavior with the manufacturer data sheet rather than estimating it from processor speed alone.

💡

LED and Indicator Control

ATTINY824-SSU can implement a centralized LED, status-indicator, or light-control module with programmable patterns and diagnostic behavior. Its 12 GPIO pins provide enough parallel I/O for indicator channels, switches, and shared-bus devices, while timer peripherals can support accurate periodic updates when their pin assignments are confirmed. The 8 KB Flash capacity allows structured firmware for animations, fault states, communication protocols, and configuration, and the 20 MHz core keeps timing overhead low. I2C and SPI can connect an LED driver or digital display controller, while UART/USART can accept commands from a parent system. In a shared-ground design, keep LED current return paths separated from sensitive analog inputs, use appropriate current limiting, and validate thermal conditions around high-brightness continuous channels.

Where to buy ATTINY824-SSU online?
ATTINY824-SSU can be requested through the Request a Quote form on this page. The form is the appropriate route for current unit availability, quantity breaks, and delivery scheduling without relying on a stale catalog figure. The exact ordering code is ATTINY824-SSU, which identifies the 14-pin SOIC version of the Microchip ATTINY824 microcontroller.
What is the price of ATTINY824-SSU?
Use the Request a Quote form on this page for the current ATTINY824-SSU quotation. The form captures the required quantity, target packaging, and delivery conditions so the commercial response reflects the current supply position. The device is an 8-bit, 20 MHz AVR microcontroller with 8 KB of Flash in a 14-pin SOIC package.
What is the lead time for ATTINY824-SSU?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on the ordered quantity, package form, and production allocation, so it should be confirmed for the specific order rather than inferred from general catalog descriptions. ATTINY824-SSU is the 14-pin SOIC ordering code for the ATTINY824 device.
Is ATTINY824-SSU in stock?
Request current stock status through the Request a Quote form on this page and include the required quantity. The ATTINY824-SSU is listed as an active Microchip product and appears in distributor catalogs, but live stock must be confirmed for the exact suffix and order quantity. Its core configuration is an 8-bit AVR MCU running at up to 20 MHz.
What are the key specifications of ATTINY824-SSU that engineers should know?
ATTINY824-SSU is an 8-bit Microchip AVR tinyAVR 2 microcontroller with a 20 MHz maximum clock, 8 KB of Flash, 1 KB of SRAM, 128 bytes of EEPROM, 12 I/O pins, and I2C, SPI, and UART/USART interfaces. It is packaged in 14-pin SOIC and uses in-system programmable Flash for program storage. These parameters place it between simple 8-bit controllers and larger 16- or 32-bit MCU designs.
What is the operating voltage of ATTINY824-SSU?
ATTINY824-SSU operates from 1.8 V to 5.5 V according to the device specification listing. This range allows the controller to work with common 3.3 V and 5 V system rails while supporting lower-voltage designs. Check individual peripheral operating limits and port-current constraints in the manufacturer data sheet before finalizing the supply architecture.
Where to download the ATTINY824-SSU datasheet PDF?
Download the family data sheet from the Microchip document link published on this page. The document covers the ATtiny424, ATtiny426, ATtiny427, ATtiny824, ATtiny826, and ATtiny827 devices, including Flash organization, electrical characteristics, and package information. The listed document identifier is DS40002311A.
Where to find the ATTINY824-SSU pinout?
Use the pin-description table in the Microchip ATtiny424/426/427/824/826/827 family data sheet to assign PCB tracks. ATTINY824-SSU uses a 14-pin SOIC package with 12 I/O pins, power, ground, programming, clock, and reset-related assignments. Do not infer pin locations from another 14-pin MCU because similar package dimensions do not guarantee identical signal mapping.
ATTINY824-SSU vs ATTINY424-SSU - which is better for a compact controller?
Choose ATTINY824-SSU when 8 KB of Flash is needed; choose ATTINY424-SSU when 4 KB is sufficient. Both belong to the same Microchip tinyAVR family and are specified for 14-pin SOIC-style implementations, making the decision primarily a firmware-capacity choice. The manufacturer family data sheet identifies 4/8 KB Flash options across the ATtiny424, ATtiny426, ATtiny827, ATTINY824, ATTINY826, and ATTINY827 family grouping.
ATTINY824-SSU vs ATTINY826-SSU - what is the difference?
ATTINY824-SSU and ATTINY826-SSU are closely related 14-pin SOIC members of the Microchip tinyAVR family, both associated with the 8 KB Flash class. Their internal peripherals and pin details must be checked individually in the family data sheet before interchangeability is approved. For firmware size, both provide substantially more program storage than a 4 KB member such as ATTINY424-SSU.
When should I choose ATTINY824-SSU over ATTINY424-SSU?
Choose ATTINY824-SSU when application firmware, boot logic, and lookup tables may exceed 4 KB, because it provides 8 KB of in-system programmable Flash and retains 1 KB of SRAM plus 128 bytes of EEPROM. Choose ATTINY424-SSU for smaller programs where the reduced Flash capacity is acceptable. Both are appropriate for compact 20 MHz-class embedded-control designs when their respective pin functions match.
Is ATTINY824-SSU suitable for an industrial sensor node?
ATTINY824-SSU is suitable for many industrial sensor-node functions because it combines a 20 MHz AVR core, 8 KB Flash, 1 KB SRAM, 128 bytes of EEPROM, 12 I/O pins, and I2C, SPI, and UART/USART connectivity. The Mouser catalog identifies an 85 °C industrial-grade option for this exact suffix. Final suitability still depends on enclosure temperature, power quality, communication distance, and regulatory requirements.
What can replace ATTINY824-SSU?
The closest same-package replacement candidates identified within the Microchip family are ATTINY424-SSU, ATTINY426-SSU, and ATTINY827-SSU, but each requires firmware and peripheral review before use. No verified cross-brand pin-compatible replacement was established for this exact 14-pin SOIC device. A replacement is drop-in only when the package, power pins, programming interface, I/O functions, clock behavior, and memory constraints all match.
Is ATTINY824-SSU the same as ATTINY824-SSFR?
No, ATTINY824-SSU and ATTINY824-SSFR should not be treated as identical ordering codes solely because they refer to the same ATtiny824 device. The suffix difference identifies a different supplied form, such as tube versus reel packaging, and therefore does not establish that one is a drop-in electrical substitute for a PCB assembly process. Confirm the manufacturer ordering guide and incoming-device packaging requirements.
What is the best cross-brand equivalent for ATTINY824-SSU?
No cross-brand equivalent can be recommended as a true drop-in replacement because the available cross-reference results do not establish identical 14-pin SOIC pin mapping, memory organization, peripheral functions, and programming behavior. A cross-brand device with similar headline specifications may still require firmware, board, and tooling changes. Use the Request a Quote form for the exact Microchip part and consult the manufacturer data sheet before considering a redesign.
Does ATTINY824-SSU need an external crystal?
ATTINY824-SSU does not inherently require an external crystal for every application because its clock architecture can support internal clock configurations, but the exact allowed operating modes and frequency limits must be verified in the manufacturer data sheet. If the design requires a precise reference clock or a specific communication timing, an external oscillator may still be appropriate even though the MCU can operate from an internal source.

엔지니어링 참조 데이터: ATTINY824-SSU — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ATTINY824-SSU when a compact 14-pin SOIC controller needs 8 KB of Flash, 1 KB of SRAM, 128 bytes of EEPROM, a 20 MHz AVR core, and I2C, SPI, and UART/USART connectivity. Its combination of 12 I/O pins and embedded serial interfaces suits sensor nodes, protocol bridges, access-control peripherals, and compact actuator controllers. Select ATTINY424-SSU or ATTINY426-SSU when 4 KB of Flash is sufficient, provided their exact peripheral and pin assignments pass a complete schematic and firmware review. Consider ATTINY827-SSU when its family-specific functions meet the design more closely, while retaining the same general 20 MHz and 8 KB Flash positioning. No cross-brand part is established as a true drop-in replacement. For any substitution, verify power pins, programming signals, clock requirements, GPIO multiplexing, timer channels, analog functions, and memory size; a matching package alone is not sufficient evidence of interchangeability.

대체품과의 비교

파라미터 이 제품 ATTINY424-SSU ATTINY426-SSU ATTINY827-SSU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Product Family tinyAVR 2 tinyAVR 2 tinyAVR 2 tinyAVR 2
CPU Architecture 8-bit AVR 8-bit AVR 8-bit AVR 8-bit AVR
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 8 KB 4 KB 4 KB 8 KB
SRAM 1 KB 1 KB 1 KB 1 KB
EEPROM 128 bytes 128 bytes 128 bytes 128 bytes
Operating Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
General-Purpose I/O 12 pins 12 pins 12 pins 12 pins
Serial Interfaces I2C, SPI, UART/USART I2C, SPI, UART/USART I2C, SPI, UART/USART I2C, SPI, UART/USART

주요 차별점

  • Twice the Flash capacity of the 4 KB family alternatives (vs ATTINY424-SSU)
  • Higher memory ceiling than ATTINY426-SSU (vs ATTINY426-SSU)
  • Same 20 MHz class performance with 1 KB SRAM (vs ATTINY827-SSU)

설계 노트

Assign every 14-pin SOIC signal from the manufacturer pin-description table before PCB routing. In particular, preserve access to programming and reset functions, identify the actual power and ground pins, and avoid assuming that GPIO assignments are interchangeable across every tinyAVR family member. Place the decoupling capacitor close to the supply pins and provide a short, low-impedance ground return from the device to the board ground plane.

Design the supply for the full 1.8 V to 5.5 V operating range of the device and account for GPIO current separately from MCU supply current. Follow the manufacturer recommendations for decoupling, power sequencing, and unused-pin treatment. If the board drives relays, LEDs, or motors, return those currents through a separate power path so switching transients do not disturb the microcontroller or sensitive sensor rails.

Keep I2C, SPI, and UART routing short where possible, especially when the bus capacitance or cable length increases. Use pull resistors only after calculating the effective resistance against the bus capacitance and device sink-current limits. For designs that combine external clocking, radio modules, or switching power converters, keep clock and serial traces away from high-current edges and provide a clean return path beneath the signals where the board stack-up permits.

Do not treat same-package family members as automatic firmware-compatible replacements. ATTINY824-SSU provides 8 KB of Flash, whereas ATTINY424-SSU and ATTINY426-SSU are identified with 4 KB, so the latter require firmware and linker-memory review. Check timer channels, analog functions, alternate pins, interrupt vectors, and bootloader behavior before approving a substitution in production hardware.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The distributor listing identifies the ATTINY824-SSU as a green device, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was included in the cited manufacturer pages.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ATTINY824-SSU datasheet ATTINY824-SSU pinout ATTINY824-SSU datasheet pdf ATTINY824-SSU specifications ATTINY824-SSU equivalent ATTINY824-SSU replacement ATTINY824-SSU price ATTINY824-SSU stock Microchip ATTINY824-SSU ATTINY824-SSU vs ATTINY424-SSU ATTINY824 20MHz 8KB Flash ATTINY824 14-SOIC application circuit

관련 부품 & 용어

Microchip Technology ATTINY824-SSU ATTINY424-SSU ATTINY426-SSU ATTINY827-SSU ATtiny824 AVR CPU tinyAVR 2 8-bit microcontroller microcontroller embedded controller semiconductor in-system programmable Flash SRAM EEPROM I2C SPI UART/USART hardware multiplier 14-pin SOIC SOIC package family surface mount SMD 1.8 V to 5.5 V 20 MHz
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기