Microchip Technology

ATXMEGA16D4-MN - 32MHz 16KB AVR MCU | Microchip | 44-VQFN

N.º de pieza: ATXMEGA16D4-MN ✓ Activo
1.6 V to 3.6 V Vdss 44-pin VQFN Package 32 MHz Speed 16 KB Memory
MOQ: 1 |

ATXMEGA16D4-MN Descripción general

The Microchip ATXMEGA16D4-MN is a low-power, high-performance 8/16-bit AVR XMEGA microcontroller with a 32 MHz maximum clock, 16 KB of ISP flash memory, 1 KB of EEPROM, and 2 KB of SRAM. The device also provides a four-channel event system, a programmable multilevel interrupt controller, and 34 general-purpose I/O pins in a 44-pin VQFN package. Its 1.6 V to 3.6 V operating range supports low-voltage embedded systems in which compact code, efficient peripheral integration, and deterministic event handling are important.

An 8/16-bit microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, data memory, and peripherals in one integrated circuit. The AVR XMEGA family uses an enhanced RISC architecture and belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductors. It is positioned for applications needing more timing and event-control resources than a basic 8-bit MCU while retaining the simplicity of an AVR-based development platform.

The ATXMEGA16D4-MN combines 16 KB of flash, including a 4 KB boot-code section, with read-while-write capability. The dedicated boot section can support controlled startup or firmware-update workflows, while 1 KB of EEPROM provides nonvolatile storage for calibration values, configuration data, or product-specific parameters. Its 2 KB SRAM supports working state and data buffering without requiring an external memory device in appropriately designed applications.

Peripheral integration is a central advantage of this XMEGA D4 device. The four-channel event system permits hardware-assisted timing and signal routing between peripherals, reducing the interrupt burden on the CPU. A programmable multilevel interrupt controller helps prioritize events, and 34 general-purpose I/O pins provide connections for sensors, actuators, communications, and human-interface functions. The 32 MHz operating speed gives designers additional timing headroom for protocol handling and control loops.

Typical uses include industrial sensor nodes, compact data-acquisition systems, building and access controls, communications equipment, and low-power embedded controllers. The device is also appropriate for bootloaders and field-updatable products because the flash memory includes a distinct 4 KB boot-code section. Designers should select external interfaces and sensors that operate within the 1.6 V to 3.6 V device supply range or provide appropriate interface translation.

For PCB design, preserve the manufacturer's recommended power, decoupling, clock, programming, and exposed-pad connections. Decoupling capacitors should be placed close to the supply pins to limit supply transients, while programming and debug access should remain available during prototyping. Confirm the exact 44-VQFN land pattern, exposed-pad requirements, and pin assignments in the manufacturer pin-description table before fabrication.

This product page consolidates the core device characteristics, package information, sourcing workflow, replacement guidance, and practical integration notes into one engineering-focused reference. It helps distinguish the ATXMEGA16D4-MN from different package, memory, and temperature configurations while keeping design decisions tied to the manufacturer documentation.

Alternativas directas para ATXMEGA16D4-MN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

ATXMEGA16D4-MU

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 32-pin QFN
Same ATxmega16D4 family and 32-pin QFN platform; ordering-code configuration must be checked for temperature-grade differences

📋 Alternativa de referencia (no en el catálogo)

ATXMEGA32D4-MU

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 32-pin QFN
Same XMEGA D4 family and 32-pin QFN platform, with 32 KB flash versus 16 KB, a 16 KB increase requiring memory-map and firmware review

📋 Alternativa de referencia (no en el catálogo)

ATXMEGA16D4-MN Valores máximos y características eléctricas

Product Type 8/16-bit AVR XMEGA microcontroller
Frecuencia de reloj máxima 32 MHz
Flash Memory 16 KB
Boot Code Section 4 KB
Read-While-Write Flash Supported
EEPROM 1 KB
SRAM 2 KB
Event System Channels 4 channels
General-Purpose I/O Pins 34 pins
Supply Voltage Range 1.6 V to 3.6 V
Rango de temperatura de funcionamiento -40 °C to +105 °C
Encapsulado 44-pin VQFN
Tipo de montaje Surface mount
Programmable Multilevel Interrupt Controller Integrated
ISP Programming Support Supported
Product Environmental Status Green
Manufacturer Product Data Page 1 product URL

Guía de configuración de pines de ATXMEGA16D4-MN 44-pin vqfn

Configuración de pines para ATXMEGA16D4-MN (encapsulado 44-pin vqfn). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 44-pin vqfn para ATXMEGA16D4-MN

No hay datos detallados de patillaje disponibles para ATXMEGA16D4-MN.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ATXMEGA16D4-MN es adecuado para 6 aplicacións: Industrial Sensor Node, Compact Data-Acquisition Controller, Field-Configurable Embedded Control, Communications Interface Module, Low-Voltage Access-Control Module, Precision Timing Control Board.

🏭

Industrial Sensor Node

The ATXMEGA16D4-MN fits compact sensor nodes that must combine several digital inputs with local signal handling. Its 34 general-purpose I/O pins can connect sensors, status indicators, and actuator controls without immediately requiring an I/O expander. The 32 MHz clock provides timing headroom for sampling routines and communication stacks, while the 1 KB EEPROM preserves calibration or configuration values across power cycles. Design the supply network around the 1.6 V to 3.6 V operating range and confirm that every attached peripheral tolerates the selected rail.

📊

Compact Data-Acquisition Controller

The ATXMEGA16D4-MN is appropriate for a compact controller that gathers data from multiple channels and transfers it through a serial interface. Thirty-four general-purpose I/O pins provide connection capacity for digital sensors, triggers, and status signals, while 2 KB of SRAM accommodates working buffers and protocol state. Its four-channel event system can coordinate timing-sensitive events and reduce reliance on polling loops. The 16 KB flash capacity should be checked against the compiled firmware, bootloader, and configuration data before committing to the part.

🧩

Field-Configurable Embedded Control

The ATXMEGA16D4-MN supports field-configurable products because it combines 1 KB of EEPROM with a flash layout containing a dedicated 4 KB boot-code section. Product identity, calibration, serial numbers, and operating profiles can be retained in EEPROM, while the boot section can protect startup and firmware-management functions. The 32 MHz processing rate is useful for local control algorithms, and the programmable multilevel interrupt controller helps prioritize time-critical tasks. Validate the complete bootloader and update process before deployment.

🌐

Communications Interface Module

The ATXMEGA16D4-MN can serve as the host controller for a compact communications module using UART, SPI, or other serial peripherals. The 34 available general-purpose I/O pins leave board-level flexibility for a transceiver interface, control signals, and status indicators. Its four-channel event system can assist with deterministic timing between communications and control functions, while the programmable interrupt architecture supports responsive protocol servicing. Account for transceiver supply levels, signal timing, and firmware memory use during integration.

🔒

Low-Voltage Access-Control Module

The ATXMEGA16D4-MN is suitable for compact access-control modules that manage readers, lock mechanisms, indicators, and communication links. Its 34 general-purpose I/O pins can support multiple discrete inputs and outputs, while the 1 KB EEPROM preserves access records or configuration parameters when limited nonvolatile storage is needed. The 1.6 V minimum operating voltage suits low-voltage systems, provided the external reader and lock circuitry use compatible supply levels. Account for debounce timing, fail-safe behavior, and communication latency during design.

⏱️

Precision Timing Control Board

The ATXMEGA16D4-MN can support timing-oriented controls because it combines a 32 MHz clock, four-channel event system, and programmable multilevel interrupt controller. These resources allow timer events and peripheral signals to be coordinated with less CPU polling than a simpler architecture. General-purpose I/O can drive trigger, direction, or interlock signals, while EEPROM retains operating modes and calibration values. Validate worst-case interrupt latency and peripheral timing against the system requirements rather than relying only on nominal clock frequency.

What are the key specifications of ATXMEGA16D4-MN that engineers should know?
The ATXMEGA16D4-MN is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 16 KB of ISP flash, 1 KB of EEPROM, 2 KB of SRAM, 34 general-purpose I/O pins, and a four-channel event system. According to the Microchip product page and manufacturer datasheet, it also includes a 4 KB boot-code section, programmable multilevel interrupt control, and a 1.6 V to 3.6 V supply range. The device is offered in a 44-pin VQFN package for compact embedded designs.
Where can I download the ATXMEGA16D4-MN datasheet PDF?
The manufacturer product page for ATXMEGA16D4-MN is the authoritative starting point for the device documentation and its linked PDF resources. According to the Microchip product page, ATXMEGA16D4 is an 8/16-bit XMEGA D4 microcontroller with 16 KB of ISP flash, 1 KB of EEPROM, and 2 KB of SRAM. Open the product page, select the ATXMEGA16D4-MN ordering configuration, and use the datasheet link for the exact package, temperature, and pin details.
Where can I find the ATXMEGA16D4-MN pinout?
The ATXMEGA16D4-MN pin assignments are listed in the manufacturer pin-description table for the 44-pin VQFN configuration. The device is an 8/16-bit XMEGA D4 MCU with 34 general-purpose I/O pins, so not every package lead is necessarily a general-purpose GPIO. Use the ordering-specific table for the 44-VQFN package and verify exposed-pad, power, ground, programming, and clock connections before laying out the PCB.
How much memory does the ATXMEGA16D4-MN have?
The ATXMEGA16D4-MN provides 16 KB of ISP flash, including a dedicated 4 KB boot-code section, together with 1 KB of EEPROM and 2 KB of SRAM. According to the Microchip product page, the flash supports read-while-write operation. Use the boot section for protected startup or firmware-management functions, EEPROM for persistent configuration, and SRAM for working data.
What is the operating voltage of ATXMEGA16D4-MN?
The ATXMEGA16D4-MN operates from 1.6 V to 3.6 V. The manufacturer ordering information identifies the device as green and specifies this supply range for the ATXMEGA16D4-MN configuration. External sensors, transceivers, and actuators connected to its I/O pins must either support that voltage range or use suitable level translation.
What is the ATXMEGA16D4-MN used for?
The ATXMEGA16D4-MN is suited to compact embedded control, sensing, communications, and data-acquisition systems that benefit from 32 MHz processing and extensive integrated peripherals. Its 34 general-purpose I/O pins support multiple sensors and actuators, while the four-channel event system provides hardware-assisted event routing. The 4 KB boot-code section also makes the device useful in products requiring controlled startup or field firmware management.
Can ATXMEGA16D4-MN replace ATXMEGA16D4-MNR?
ATXMEGA16D4-MN and ATXMEGA16D4-MNR should not be treated as interchangeable without checking the ordering and delivery format because the final suffix can encode the shipping configuration. The manufacturer device family and electrical function are the same, but a procurement substitution must still confirm package, temperature grade, tape-and-reel or other packing method, and program or marking details. Use the manufacturer ordering information before approving the substitution.
What can replace ATXMEGA16D4-MN in a design?
A true drop-in replacement for the ATXMEGA16D4-MN must match the 44-VQFN footprint, pin functions, 1.6 V to 3.6 V supply range, 32 MHz operating point, memory configuration, and peripheral requirements. No confirmed cross-manufacturer drop-in part is identified for this device. A functional substitute may be possible, but it requires firmware, peripheral, pinout, and qualification review rather than a simple board-level replacement.
Is the ATXMEGA16D4-MN suitable for low-power embedded systems?
The ATXMEGA16D4-MN belongs to the low-power, high-performance AVR XMEGA family and combines a 32 MHz clock with extensive on-chip peripherals. According to the manufacturer product page, the device includes 16 KB of flash, 1 KB of EEPROM, 2 KB of SRAM, a four-channel event system, and a programmable multilevel interrupt controller. Its low-power design makes it suitable for embedded control, but final battery life still depends on the selected operating mode, clock configuration, and duty cycle.
How does the ATXMEGA16D4 event system help a design?
The ATXMEGA16D4 event system provides four channels for routing and timing events between hardware peripherals. This allows timers, counters, communication functions, and external inputs to participate in deterministic event handling without relying exclusively on software polling. According to the manufacturer product page, the programmable multilevel interrupt controller works with this peripheral architecture, helping prioritize events and reduce processor workload in responsive embedded designs.
When should I choose ATXMEGA16D4-MN over another AVR XMEGA device?
Choose the ATXMEGA16D4-MN when a design needs a 32 MHz AVR XMEGA processor with 16 KB of flash, 1 KB of EEPROM, 2 KB of SRAM, 34 general-purpose I/O pins, and a four-channel event system in the 44-VQFN footprint. Select a larger-memory family member when application code or RAM exceeds those limits, and select a different package when the existing PCB does not accept 44-VQFN land geometry.
Is ATXMEGA16D4-MN suitable for industrial control equipment?
The ATXMEGA16D4-MN is suitable for industrial control tasks requiring a low-power microcontroller, programmable event handling, and a wide I/O count. The manufacturer lists an operating range of -40 °C to +105 °C for the MN ordering configuration. Application-level industrial suitability still depends on system qualification, transient immunity, isolation, enclosure temperature, and the reliability requirements of the finished equipment.
Where to buy ATXMEGA16D4-MN online?
Use the Request a Quote form on this page to request ATXMEGA16D4-MN availability, current lead time, and minimum order quantity. The form provides a direct engineering procurement channel without embedding a temporary price or stock claim. Include the required package, temperature, and delivery configuration in the request so the exact ATXMEGA16D4-MN ordering code can be confirmed.
What is the price of ATXMEGA16D4-MN?
The current ATXMEGA16D4-MN price should be requested through the Request a Quote form on this page because pricing and availability can change with order quantity and delivery configuration. For an accurate quotation, specify the required quantity, ATXMEGA16D4-MN suffix, and shipment destination. This avoids confusing the price request with a different package, temperature grade, or reel configuration.
What is the lead time and stock status for ATXMEGA16D4-MN?
Request the current ATXMEGA16D4-MN stock position, lead time, and minimum order quantity through the Request a Quote form on this page. Stock levels should be confirmed for the exact manufacturer ordering code and its delivery format rather than inferred from family-level listings. Include your production forecast and shipment requirements so the quotation reflects the appropriate supply commitment.

Datos de referencia de ingeniería para ATXMEGA16D4-MN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the ATXMEGA16D4-MN when a compact 44-VQFN design benefits from 32 MHz processing, 16 KB of flash, 1 KB of EEPROM, 2 KB of SRAM, 34 general-purpose I/O pins, and a four-channel event system. Select a larger-memory XMEGA device when application firmware, boot code, SRAM demand, or peripheral requirements exceed those limits. Select a different package if the existing PCB cannot accept the 44-VQFN footprint. No confirmed pin-compatible drop-in alternative is established here, so any proposed substitute must be reviewed for package geometry, pin functions, memory, clock, supply range, boot architecture, and software support. Functional alternatives from other manufacturers may require PCB changes, driver changes, and qualification work and should not be treated as drop-in replacements.

Comparación con alternativas

Parámetro Este producto
Brand Microchip Technology
Package 44-pin VQFN
Maximum Clock Frequency 32 MHz
Flash Memory 16 KB
EEPROM 1 KB
SRAM 2 KB
General-Purpose I/O Pins 34 pins
Event System Channels 4 channels
Supply Voltage Range 1.6 V to 3.6 V
Operating Temperature Range -40 °C to +105 °C

Diferenciadores clave

  • Dedicated event-driven control resources (frente a General-purpose 8-bit microcontrollers without an integrated four-channel event system)
  • Structured flash and nonvolatile data memory (frente a General-purpose MCUs offering a single undivided program-memory area)
  • Broad I/O capacity in a compact surface-mount package (frente a MCUs with fewer general-purpose I/O pins in comparable embedded applications)
  • 32 MHz processing headroom (frente a Lower-frequency basic 8-bit microcontrollers)

Notas de diseño

Use the manufacturer land pattern and pin-description table for the 44-VQFN configuration before routing the board. Place supply-decoupling components close to their intended power pins, keep high-current return paths compact, and follow the exposed-pad connection and thermal-land instructions shown in the manufacturer package documentation. Confirm the pin orientation against the package drawing because a mirrored land pattern can produce a board that is electrically difficult to diagnose.

Design the 1.6 V to 3.6 V power system so the MCU remains within its rated supply range during startup, communication activity, and output transitions. Add local bulk and high-frequency decoupling at the supply entry points, and calculate the total rail tolerance rather than relying only on nominal 3.3 V operation. Any external sensor, transceiver, or actuator sharing the I/O voltage must also tolerate the selected supply and pin levels.

Reserve accessible programming and debug connections in the layout, even for production boards. These interfaces simplify firmware recovery, boundary configuration, and production programming. Keep clock and sensitive signal paths short, avoid routing them beside high-current switching nodes, and use a continuous ground reference beneath signal paths. Where the event system connects timing-sensitive peripherals, follow the timing and grounding recommendations in the manufacturer datasheet.

Check the compiled image size against the 16 KB flash allocation, including the 4 KB boot-code section, application code, bootloader code, and configuration data. Also check the runtime stack and buffers against the 2 KB SRAM limit. Treating the entire 16 KB as available application memory or relying on 1 KB of EEPROM for frequently rewritten logs can cause memory exhaustion or unnecessary wear.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The ordering information identifies the ATXMEGA16D4-MN as green, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

ATXMEGA16D4-MN datasheet ATXMEGA16D4-MN pinout ATXMEGA16D4-MN datasheet pdf ATXMEGA16D4-MN equivalent ATXMEGA16D4-MN replacement ATXMEGA16D4-MN cross reference ATXMEGA16D4-MN 44 VQFN ATXMEGA16D4-MN price ATXMEGA16D4-MN stock Microchip ATXMEGA16D4-MN ATXMEGA16D4-MN application circuit ATXMEGA16D4-MN programming

Componentes & términos relacionados

Microchip Technology ATXMEGA16D4-MN ATXMEGA16D4 AVR XMEGA 8/16-bit microcontroller embedded microcontroller RISC architecture semiconductor 16 KB ISP flash memory 4 KB boot code section 1 KB EEPROM 2 KB SRAM four-channel event system programmable multilevel interrupt controller 34 general-purpose I/O pins 32 MHz clock 1.6 V to 3.6 V power supply 44-VQFN package VQFN family surface-mount package industrial sensor node data-acquisition controller field-configurable embedded control communications interface module access-control module
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ