ATXMEGA16D4-MN - 32MHz 16KB AVR MCU | Microchip | 44-VQFN
부품 번호: ATXMEGA16D4-MN ✓ 활성ATXMEGA16D4-MN 개요
An 8/16-bit microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, data memory, and peripherals in one integrated circuit. The AVR XMEGA family uses an enhanced RISC architecture and belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductors. It is positioned for applications needing more timing and event-control resources than a basic 8-bit MCU while retaining the simplicity of an AVR-based development platform.
The ATXMEGA16D4-MN combines 16 KB of flash, including a 4 KB boot-code section, with read-while-write capability. The dedicated boot section can support controlled startup or firmware-update workflows, while 1 KB of EEPROM provides nonvolatile storage for calibration values, configuration data, or product-specific parameters. Its 2 KB SRAM supports working state and data buffering without requiring an external memory device in appropriately designed applications.
Peripheral integration is a central advantage of this XMEGA D4 device. The four-channel event system permits hardware-assisted timing and signal routing between peripherals, reducing the interrupt burden on the CPU. A programmable multilevel interrupt controller helps prioritize events, and 34 general-purpose I/O pins provide connections for sensors, actuators, communications, and human-interface functions. The 32 MHz operating speed gives designers additional timing headroom for protocol handling and control loops.
Typical uses include industrial sensor nodes, compact data-acquisition systems, building and access controls, communications equipment, and low-power embedded controllers. The device is also appropriate for bootloaders and field-updatable products because the flash memory includes a distinct 4 KB boot-code section. Designers should select external interfaces and sensors that operate within the 1.6 V to 3.6 V device supply range or provide appropriate interface translation.
For PCB design, preserve the manufacturer's recommended power, decoupling, clock, programming, and exposed-pad connections. Decoupling capacitors should be placed close to the supply pins to limit supply transients, while programming and debug access should remain available during prototyping. Confirm the exact 44-VQFN land pattern, exposed-pad requirements, and pin assignments in the manufacturer pin-description table before fabrication.
This product page consolidates the core device characteristics, package information, sourcing workflow, replacement guidance, and practical integration notes into one engineering-focused reference. It helps distinguish the ATXMEGA16D4-MN from different package, memory, and temperature configurations while keeping design decisions tied to the manufacturer documentation.
드롭인 대체품: ATXMEGA16D4-MN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
ATXMEGA16D4-MU
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATXMEGA32D4-MU
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATXMEGA16D4-MN 최대 정격 & 전기적 특성
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| 최대 클록 주파수 | 32 MHz |
| Flash Memory | 16 KB |
| Boot Code Section | 4 KB |
| Read-While-Write Flash | Supported |
| EEPROM | 1 KB |
| SRAM | 2 KB |
| Event System Channels | 4 channels |
| General-Purpose I/O Pins | 34 pins |
| Supply Voltage Range | 1.6 V to 3.6 V |
| 동작 온도 범위 | -40 °C to +105 °C |
| 패키지 | 44-pin VQFN |
| 실장 유형 | Surface mount |
| Programmable Multilevel Interrupt Controller | Integrated |
| ISP Programming Support | Supported |
| Product Environmental Status | Green |
| Manufacturer Product Data Page | 1 product URL |
ATXMEGA16D4-MN 44-pin vqfn 핀 구성 가이드
ATXMEGA16D4-MN(44-pin vqfn 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATXMEGA16D4-MN.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATXMEGA16D4-MN 적합 용도: 6 애플리케이션s: Industrial Sensor Node, Compact Data-Acquisition Controller, Field-Configurable Embedded Control, Communications Interface Module, Low-Voltage Access-Control Module, Precision Timing Control Board.
Industrial Sensor Node
The ATXMEGA16D4-MN fits compact sensor nodes that must combine several digital inputs with local signal handling. Its 34 general-purpose I/O pins can connect sensors, status indicators, and actuator controls without immediately requiring an I/O expander. The 32 MHz clock provides timing headroom for sampling routines and communication stacks, while the 1 KB EEPROM preserves calibration or configuration values across power cycles. Design the supply network around the 1.6 V to 3.6 V operating range and confirm that every attached peripheral tolerates the selected rail.
Compact Data-Acquisition Controller
The ATXMEGA16D4-MN is appropriate for a compact controller that gathers data from multiple channels and transfers it through a serial interface. Thirty-four general-purpose I/O pins provide connection capacity for digital sensors, triggers, and status signals, while 2 KB of SRAM accommodates working buffers and protocol state. Its four-channel event system can coordinate timing-sensitive events and reduce reliance on polling loops. The 16 KB flash capacity should be checked against the compiled firmware, bootloader, and configuration data before committing to the part.
Field-Configurable Embedded Control
The ATXMEGA16D4-MN supports field-configurable products because it combines 1 KB of EEPROM with a flash layout containing a dedicated 4 KB boot-code section. Product identity, calibration, serial numbers, and operating profiles can be retained in EEPROM, while the boot section can protect startup and firmware-management functions. The 32 MHz processing rate is useful for local control algorithms, and the programmable multilevel interrupt controller helps prioritize time-critical tasks. Validate the complete bootloader and update process before deployment.
Communications Interface Module
The ATXMEGA16D4-MN can serve as the host controller for a compact communications module using UART, SPI, or other serial peripherals. The 34 available general-purpose I/O pins leave board-level flexibility for a transceiver interface, control signals, and status indicators. Its four-channel event system can assist with deterministic timing between communications and control functions, while the programmable interrupt architecture supports responsive protocol servicing. Account for transceiver supply levels, signal timing, and firmware memory use during integration.
Low-Voltage Access-Control Module
The ATXMEGA16D4-MN is suitable for compact access-control modules that manage readers, lock mechanisms, indicators, and communication links. Its 34 general-purpose I/O pins can support multiple discrete inputs and outputs, while the 1 KB EEPROM preserves access records or configuration parameters when limited nonvolatile storage is needed. The 1.6 V minimum operating voltage suits low-voltage systems, provided the external reader and lock circuitry use compatible supply levels. Account for debounce timing, fail-safe behavior, and communication latency during design.
Precision Timing Control Board
The ATXMEGA16D4-MN can support timing-oriented controls because it combines a 32 MHz clock, four-channel event system, and programmable multilevel interrupt controller. These resources allow timer events and peripheral signals to be coordinated with less CPU polling than a simpler architecture. General-purpose I/O can drive trigger, direction, or interlock signals, while EEPROM retains operating modes and calibration values. Validate worst-case interrupt latency and peripheral timing against the system requirements rather than relying only on nominal clock frequency.
엔지니어링 참조 데이터: ATXMEGA16D4-MN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Microchip Technology |
| Package | 44-pin VQFN |
| Maximum Clock Frequency | 32 MHz |
| Flash Memory | 16 KB |
| EEPROM | 1 KB |
| SRAM | 2 KB |
| General-Purpose I/O Pins | 34 pins |
| Event System Channels | 4 channels |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Operating Temperature Range | -40 °C to +105 °C |
주요 차별점
- Dedicated event-driven control resources (vs General-purpose 8-bit microcontrollers without an integrated four-channel event system)
- Structured flash and nonvolatile data memory (vs General-purpose MCUs offering a single undivided program-memory area)
- Broad I/O capacity in a compact surface-mount package (vs MCUs with fewer general-purpose I/O pins in comparable embedded applications)
- 32 MHz processing headroom (vs Lower-frequency basic 8-bit microcontrollers)
설계 노트
Use the manufacturer land pattern and pin-description table for the 44-VQFN configuration before routing the board. Place supply-decoupling components close to their intended power pins, keep high-current return paths compact, and follow the exposed-pad connection and thermal-land instructions shown in the manufacturer package documentation. Confirm the pin orientation against the package drawing because a mirrored land pattern can produce a board that is electrically difficult to diagnose.
Design the 1.6 V to 3.6 V power system so the MCU remains within its rated supply range during startup, communication activity, and output transitions. Add local bulk and high-frequency decoupling at the supply entry points, and calculate the total rail tolerance rather than relying only on nominal 3.3 V operation. Any external sensor, transceiver, or actuator sharing the I/O voltage must also tolerate the selected supply and pin levels.
Reserve accessible programming and debug connections in the layout, even for production boards. These interfaces simplify firmware recovery, boundary configuration, and production programming. Keep clock and sensitive signal paths short, avoid routing them beside high-current switching nodes, and use a continuous ground reference beneath signal paths. Where the event system connects timing-sensitive peripherals, follow the timing and grounding recommendations in the manufacturer datasheet.
Check the compiled image size against the 16 KB flash allocation, including the 4 KB boot-code section, application code, bootloader code, and configuration data. Also check the runtime stack and buffers against the 2 KB SRAM limit. Treating the entire 16 KB as available application memory or relying on 1 KB of EEPROM for frequently rewritten logs can cause memory exhaustion or unnecessary wear.
규정 준수 정보
The ordering information identifies the ATXMEGA16D4-MN as green, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.