Broadcom

BCM8155FAIFBG - 11.352 Gbps XFI Transceiver | Broadcom

N.º de pieza: BCM8155FAIFBG ✓ Activo
MOQ: 1 |

BCM8155FAIFBG Descripción general

The Broadcom BCM8155FAIFBG is a high-speed XFI transceiver for long-haul serial communication, supporting data rates from 8.5 Gbps to 11.352 Gbps. It is designed for applications requiring compliant serial links, robust signal integrity, and built-in test and fault-isolation capabilities. The device includes enhanced capability for long-haul transmission with selectable RZ modulation on the transmitter.

An XFI transceiver is a high-speed interface IC that converts parallel or serial logic into a physical serial channel and receives data from that channel. It belongs to the broader hierarchy of transceiver, communication interface, interface IC, and semiconductor products. The BCM8155 operates in demanding data-center, telecom, and industrial communication systems where link margin, standards compliance, and diagnostic coverage are important design considerations.

Key features include support for OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae requirements. Its supported range of 8.5 Gbps to 11.352 Gbps supports 10G-class and related high-speed serial links. Input sensitivity is specified at 10 mV peak-to-peak, which provides a defined receiver sensitivity reference for link-budget calculations. The device also provides loopbacks, a pattern generator, and a pattern checker for fault isolation and board-level validation.

The BCM8155 is intended for optical-module, backplane, router, switch, and test-equipment designs where a standardized XFI interface helps simplify interoperability between high-speed PHY or ASIC subsystems. Its diagnostic features allow engineers to isolate transmitter, receiver, pattern-generation, and pattern-verification failures without relying only on external instrumentation. RZ modulation support can provide additional flexibility for long-haul transmission and signal-integrity optimization.

When designing around this transceiver, use the manufacturer pin-description and reference-circuit information to assign power, ground, signal, control, and test pins. Confirm the completed channel budget against 11.352 Gbps operation and the receiver sensitivity requirement. Review termination, differential routing, connector or optical-interface transitions, and return-path continuity before releasing the PCB layout. The device should be treated as a precision high-speed component, with controlled impedance and short return paths especially important in multilayer designs.

Alternativas directas para BCM8155FAIFBG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

BCM8155FAIFBG Valores máximos y características eléctricas

No hay especificaciones disponibles

Guía de configuración de pines de BCM8155FAIFBG standard

Configuración de pines para BCM8155FAIFBG (encapsulado standard). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado standard para BCM8155FAIFBG

No hay datos detallados de patillaje disponibles para BCM8155FAIFBG.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

BCM8155FAIFBG es adecuado para 6 aplicacións: 10G-Class Optical Module Interfaces, Router and Switch Line Cards, Telecom Backplane Links, Data-Center Interconnect Equipment, High-Speed Test and Measurement Systems, Industrial High-Speed Control Systems.

🌐

10G-Class Optical Module Interfaces

BCM8155FAIFBG fits high-speed optical-module interfaces that need an XFI connection between a transceiver module and an ASIC or line-card controller. Its 8.5 Gbps to 11.352 Gbps range covers the operating envelope for 10G-class serial links, while RZ modulation capability provides additional long-haul design flexibility. The 10 mV peak-to-peak input sensitivity is useful when closing the receiver link budget against module output, connector loss, and channel loss. In implementation, the reference network and differential routing must be controlled closely, and the pattern checker can verify recovered data during bring-up.

🌐

Router and Switch Line Cards

BCM8155FAIFBG is appropriate for router and switch line cards requiring a standardized XFI interface to high-speed optical or copper-channel subsystems. The operating range of 8.5 Gbps to 11.352 Gbps supports modern 10G-class transport links, while the available RZ option can assist long-haul channel design. In a line card, the transceiver works beside a packet-processing ASIC, clocking circuitry, and physical-layer devices. Controlled impedance, continuous ground references, and minimized crosstalk are essential because the XFI signal margin depends on the complete channel rather than on the IC alone.

📡

Telecom Backplane Links

BCM8155FAIFBG supports telecom backplane and equipment links that operate at high serial rates and benefit from long-haul transmission capability. Its selectable RZ transmitter modulation gives system designers another signaling choice when evaluating channel margin, while the 10 mV peak-to-peak receiver sensitivity provides a defined budget input. Deployment in a backplane requires careful treatment of insertion loss, connector transitions, skew, crosstalk, and return-path discontinuities. The built-in loopback, pattern generator, and pattern checker support commissioning and fault isolation after the system is assembled.

🖥️

Data-Center Interconnect Equipment

BCM8155FAIFBG can be used in data-center interconnect equipment where an ASIC, switching fabric, or aggregation engine requires a high-speed XFI connection to an optical interface. The device supports 8.5 Gbps to 11.352 Gbps and provides diagnostic functions that help identify failures in complex systems. Designers should validate the complete channel against receiver sensitivity and transmitter specifications, then account for thermal conditions and power delivery near the transceiver. Controlled-impedance routing and a short, continuous ground path help preserve signal quality across multilayer boards.

🔧

High-Speed Test and Measurement Systems

BCM8155FAIFBG is suitable for test and measurement equipment that must exercise high-speed serial links, emulate traffic, and isolate faults. The integrated pattern generator produces controlled test data, the pattern checker evaluates the received sequence, and loopback modes support focused troubleshooting of transmitter and receiver paths. These capabilities can shorten board-level validation compared with systems that depend entirely on external pattern sources. The instrument enclosure still needs a controlled thermal environment and an appropriate high-speed interface, while the PCB must preserve controlled impedance and minimize discontinuity at every connection.

🏭

Industrial High-Speed Control Systems

BCM8155FAIFBG can support industrial control and monitoring systems that exchange data over a long-haul serial link rather than relying only on a short board-level interface. The supported 8.5 Gbps to 11.352 Gbps range and optional RZ modulation provide a high-performance transport foundation, while the diagnostic functions improve field and manufacturing troubleshooting. Because industrial environments may include vibration, temperature variation, and electromagnetic coupling, the installation should be validated at the system level. Cable or optical transitions, grounding, shielding, and power filtering all influence the practical link margin.

Where can I download the BCM8155FAIFBG datasheet PDF?
The BCM8155FAIFBG datasheet PDF is available through the manufacturer-related technical document link on this page. It describes the XFI transceiver, supported rates from 8.5 Gbps to 11.352 Gbps, receiver sensitivity of 10 mV peak-to-peak, RZ modulation capability, and compliance with OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae specifications. Use the manufacturer datasheet as the authoritative source for pin descriptions, electrical limits, timing, and reference-circuit details before finalizing a board layout.
What is the BCM8155FAIFBG used for?
The BCM8155FAIFBG is used as a high-speed XFI transceiver in long-haul serial communication equipment. Its transmitter can support RZ modulation, while its receiver operates across rates from 8.5 Gbps to 11.352 Gbps. The device is suited to optical-module, router, switch, backplane, and test-system designs that need a standardized high-speed interface. Built-in loopbacks, pattern generation, and pattern checking help isolate faults during bring-up and production testing.
What data rates does BCM8155FAIFBG support?
BCM8155FAIFBG supports serial data rates from 8.5 Gbps to 11.352 Gbps. The upper rate is important for high-speed XFI links where channel loss, jitter, and transceiver performance must be evaluated together. According to the Broadcom BCM8155 technical documentation, the device is aligned with XFI and IEEE 802.3ae-related requirements. Use the complete datasheet timing and electrical tables to confirm operation at the exact system rate and line configuration.
What is the input sensitivity of BCM8155FAIFBG?
The specified input sensitivity of BCM8155FAIFBG is 10 mV peak-to-peak. This value is a key receiver-budget reference when designing an XFI link with optical components, connectors, retimers, or other lossy elements. It should be used with the transmitter characteristics, channel loss, jitter tolerance, and system margin in the complete link budget. The manufacturer datasheet should be consulted for the exact test conditions associated with the sensitivity specification.
Can BCM8155FAIFBG support long-haul transmission?
Yes, BCM8155FAIFBG is explicitly identified as having enhanced capability for long-haul transmission, including the ability to enable RZ modulation on the transmitter. This makes it applicable to high-speed links where channel margin and signaling format are important. The transceiver also provides a 10 mV peak-to-peak input-sensitivity specification and supports rates through 11.352 Gbps. Final link reach must still be verified against the complete optical or copper channel and its loss budget.
What fault-isolation features does BCM8155FAIFBG provide?
BCM8155FAIFBG provides loopbacks, a pattern generator, and a pattern checker for fault isolation. These facilities help engineers separate transmitter, receiver, link, and test-pattern problems during board bring-up or manufacturing. The pattern generator can create a controlled serial stimulus, while the checker evaluates received data. Because the exact test modes and control procedures depend on the device register and pin configuration, consult the manufacturer datasheet and application guidance before automating production tests.
Is BCM8155FAIFBG suitable for XFI-based router and switch designs?
BCM8155FAIFBG is suitable for XFI-based router and switch designs when the system requires operation from 8.5 Gbps through 11.352 Gbps and a standards-oriented transceiver interface. Its XFI compliance and support for OIF, Telcordia, ITU-T, and IEEE 802.3ae-related specifications help establish interoperability with compatible high-speed subsystems. The complete system still requires validation of power integrity, impedance control, channel characteristics, thermal conditions, and connector or optical-module behavior.
Where can I buy BCM8155FAIFBG and what is the price?
Use the Request a Quote form on this page to request current BCM8155FAIFBG availability, pricing, quantity breaks, and lead time. Commercial terms can change with inventory and order volume, so a current quotation is more useful than a static historical listing. For design validation, request the exact BCM8155FAIFBG orderable MPN and confirm package, temperature, and delivery requirements before releasing a production order.
What is the lead time for BCM8155FAIFBG?
Current BCM8155FAIFBG lead time depends on inventory, order quantity, and the confirmed supply status. Submit a Request a Quote with the required quantity, target date, and shipment destination to obtain the current schedule. For production planning, include a safety-stock allowance for long-lead high-speed ICs and avoid changing the transceiver MPN late in the build. The manufacturer part number and package requirements should remain fixed when the quotation is prepared.
Is BCM8155FAIFBG in stock?
Stock status for BCM8155FAIFBG should be confirmed through the Request a Quote form on this page because availability can change between sourcing events. Include your required quantity, approved vendor status, and delivery schedule in the request. The target MPN is BCM8155FAIFBG; use that exact identifier when comparing quotations. If an alternate transceiver is considered, verify pin compatibility, electrical timing, supported rates, and package dimensions separately rather than relying only on stock status.
What is the difference between BCM8155FAIFBG and other XFI transceivers?
BCM8155FAIFBG differentiates itself through a defined 8.5 Gbps to 11.352 Gbps operating range, 10 mV peak-to-peak input sensitivity, selectable transmitter RZ modulation, and built-in loopback, pattern-generator, and pattern-checker functions. Other XFI devices may target different rate ranges, package styles, channel reaches, or diagnostic features. A meaningful comparison must therefore include supported data rate, receiver sensitivity, modulation options, pinout, reference design, and system-level compliance—not just the transceiver label.
When should I choose BCM8155FAIFBG over another XFI transceiver?
Choose BCM8155FAIFBG when the design needs an XFI transceiver covering 8.5 Gbps to 11.352 Gbps, long-haul capability, selectable RZ modulation, and integrated fault-isolation functions. It is particularly attractive for high-speed communications equipment where pattern generation, pattern checking, and loopback can simplify validation. Compare the choice against alternatives by checking package pinout, power rails, timing, reach, channel margin, and qualification requirements; a feature match alone does not establish drop-in replacement.
What is the best drop-in replacement for BCM8155FAIFBG?
No confirmed drop-in replacement for BCM8155FAIFBG is established in the available cross-reference results. A valid replacement must use the same package and footprint, provide pin-to-pin compatibility, support the required 8.5 Gbps to 11.352 Gbps rates, and meet the receiver sensitivity, timing, modulation, and power requirements. Treat any candidate as a redesign until its manufacturer documentation confirms those points. Do not substitute a similarly named or similarly packaged device without electrical and mechanical verification.
Can an equivalent Broadcom device replace BCM8155FAIFBG?
A Broadcom device should be considered a replacement only after its documentation confirms the same package dimensions, pin assignment, electrical ratings, supported data rates, receiver sensitivity, RZ behavior, and test functions. No equivalent Broadcom MPN is confirmed by the available replacement results, so BCM8155FAIFBG remains the identified target rather than a formally approved substitute. For an exact conversion, obtain a manufacturer cross-reference and compare the complete datasheets and reference designs.
How should BCM8155FAIFBG be used in a high-speed PCB design?
Place BCM8155FAIFBG according to the manufacturer reference layout, with controlled-impedance differential routes, short return paths, and carefully planned power and ground connections. The high-speed interface should be evaluated for insertion loss, jitter, crosstalk, connector transitions, and nearby switching noise. Use the pattern generator, checker, and loopback functions to validate the assembled board. Keep the external network and test access consistent with the datasheet reference circuit so signal integrity remains predictable.
What standards does BCM8155FAIFBG comply with?
BCM8155FAIFBG is described as compliant with OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae standards. These references indicate the intended high-speed serial interface and telecommunications operating framework. For procurement and qualification, request the current manufacturer declaration or product documentation that identifies the exact standard, revision, test method, and environmental condition. Standards language alone should not be interpreted as approval for every system-level application without the relevant certification evidence.

Datos de referencia de ingeniería para BCM8155FAIFBG — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose BCM8155FAIFBG when the system requires an XFI transceiver operating across 8.5 Gbps to 11.352 Gbps, long-haul transmission capability, and integrated test functions. Its selectable RZ modulation is useful when the channel budget requires additional signaling flexibility, while the 10 mV peak-to-peak input-sensitivity specification provides a defined receiver reference. Consider a different device only after confirming the package, pinout, timing, power requirements, receiver performance, and regulatory needs. No confirmed drop-in replacement was identified in the available cross-reference results, so changing the MPN should be treated as a design-verification effort rather than a routine substitution. For systems using similar high-speed interface parts, evaluate the complete channel, including connector loss, jitter, crosstalk, return-path continuity, and thermal conditions. Use the pattern generator, checker, and loopback functions during manufacturing and field troubleshooting to separate transceiver faults from interconnect or module faults.

Comparación con alternativas

Parámetro Este producto
Brand Broadcom
Supported Data Rate 8.5 Gbps to 11.352 Gbps
Maximum Data Rate 11.352 Gbps
Input Sensitivity 10 mV peak-to-peak
Interface XFI
Transmitter Modulation RZ modulation capable
Fault Isolation Loopbacks, pattern generator, and pattern checker
Standards Compliance OIF, Telcordia, ITU-T, XFI, IEEE 802.3ae

Diferenciadores clave

  • Broad supported operating range (frente a No confirmed drop-in alternative)
  • Long-haul modulation flexibility (frente a No confirmed drop-in alternative)
  • Integrated diagnostic coverage (frente a No confirmed drop-in alternative)

Notas de diseño

Use the manufacturer reference layout to control differential impedance, via transitions, return paths, and the placement of the external interface network. At rates as high as 11.352 Gbps, small discontinuities can affect edge quality and link margin. Keep the high-speed path compact, avoid abrupt width changes, maintain a continuous ground reference, and review the design with an appropriate signal-integrity model before fabrication.

Build the channel budget around the 10 mV peak-to-peak receiver-sensitivity reference and include transmitter output, connector or optical-path loss, insertion loss, jitter, and crosstalk. Account for the exact 8.5 Gbps to 11.352 Gbps operating range rather than assuming all system margins remain constant. If channel loss is high, evaluate the available RZ modulation option and use the loopback and pattern-checking facilities to isolate whether degradation originates in the link or the transceiver.

Do not treat XFI, OIF, Telcordia, ITU-T, or IEEE 802.3ae references as permission to substitute any device with a similar package name. A valid replacement must have verified pin mapping, electrical ratings, timing, supported rates, receiver sensitivity, modulation behavior, and mechanical compatibility. After board assembly, use the pattern generator and checker before declaring the link operational, and separate transmitter, receiver, and interconnect faults with the available loopback modes.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The BCM8155 technical description identifies OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae compliance. Component-level RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

BCM8155FAIFBG datasheet BCM8155FAIFBG pinout BCM8155FAIFBG datasheet pdf BCM8155FAIFBG specifications BCM8155FAIFBG price BCM8155FAIFBG stock BCM8155FAIFBG equivalent BCM8155FAIFBG replacement BCM8155FAIFBG cross reference Broadcom BCM8155FAIFBG BCM8155FAIFBG XFI transceiver BCM8155FAIFBG 11.352 Gbps BCM8155FAIFBG long haul BCM8155FAIFBG schematic

Componentes & términos relacionados

Broadcom Broadcom Limited BCM8155FAIFBG BCM8155 XFI XFI transceiver high-speed serial interface transceiver interface IC semiconductor long-haul transmission RZ modulation 8.5 Gbps 11.352 Gbps 10 mV peak-to-peak input sensitivity loopback pattern generator pattern checker OIF Telcordia ITU-T IEEE 802.3ae optical module router switch
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ