Harris Corporation

CD4017BD/3 - 10-Stage CMOS Decade Counter | Harris Corporation

N.º de pieza: CD4017BD/3 ✓ Activo
3 V to 18 V Vdss 16-lead ceramic dual-in-line package (16-CDIP) Package Positive or negative Speed
MOQ: 1 |

CD4017BD/3 Descripción general

Harris Corporation CD4017BD/3 is a 10-bit CMOS decade counter with one decoded output active at a time, positive or negative clock-edge triggering, and a 16-lead ceramic dual-in-line package. It advances through 10 sequential states, provides one output per decade state, and supports cascading through its carry output.

A decade counter is a sequential logic device that divides an input clock into ten discrete states. The CD4017BD/3 belongs to the CD4000 CMOS logic family, where CMOS describes complementary metal-oxide-semiconductor construction. Within the broader hierarchy, it is a counter IC, a logic IC, and a digital semiconductor designed for state sequencing, timing, and frequency-division applications.

The principal features are 10 decoded outputs, independent positive and negative clock-edge inputs, asynchronous reset control, and a carry output for cascaded counting stages. Its counter output sequence makes it possible to drive one of ten loads in turn. The 16-CDIP package also supports conventional through-hole PCB assembly and socket-based prototyping. Operating voltage and detailed timing limits should be selected from the CD4017B manufacturer datasheet for the exact supplier grade and qualification suffix.

Technically, the device accepts clock events and transfers its decoded state on each qualifying edge. The reset input provides a direct way to return the counter to its initial state, while the carry output identifies completion of a decade and can clock another stage. This architecture avoids requiring a full binary counter and decoder as separate external components. Cascading permits larger decimal sequences without redesigning the board, although each added stage contributes propagation delay and additional output states.

Typical uses include stepper-motor and relay sequencing, decade-frequency dividers, timing wheels, lighting sequencers, programmable counters, industrial control panels, and digital clock or timer subsystems. It is especially useful when ten mutually exclusive outputs are required rather than a binary count bus. Because output transitions occur on clock edges, the clock source must have controlled rise and fall times to avoid false counting.

Designers should observe the manufacturer's absolute maximum ratings and recommended operating conditions, including supply voltage, input rise and fall times, output drive, and temperature limits. Decoupling capacitors should be placed close to the supply pins, and the clock and reset traces should remain short to minimize coupling and false transitions. Cascaded stages should be checked for accumulated propagation delay.

This page combines the manufacturer function description, package identification, engineering use cases, verified drop-in candidates, and design guidance to support component selection and board-level implementation. It also distinguishes actual CD4017B drop-in options from related counters that are not electrically or pin-for-pin interchangeable.

Alternativas directas para CD4017BD/3 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con CD4017BD/3 (mismo factor de forma y huella) — difiere en Package, Mounting Type, Logic Family, Function, Reset Function.

Texas Instruments
Package: 16-lead CDIP hermetic ceramic package
Reset Function: Asynchronous reset to the zero state
Texas Instruments
Package: 16-Pin PDIP (N)
Logic Family: CMOS 4000B series
Function: Counter, Decade (divide-by-10) with 10 decoded outputs
onsemi
Package: 16-SOIC, 3.90 mm width
Mounting Type: Surface mount
Function: 5-stage Johnson decade counter with built-in code converter

CD4017BD

✅ Sustitución directa
Texas Instruments
📦 16-CDIP
CMOS decade counter and divider · Texas Instruments · 16-lead CDIP hermetic ceramic package · Through-hole · CD4000 CMOS · 10 decoded outputs, Q0-Q9 · 10-bit · Up counter

Consulte el precio

Ver hoja de datos →

CD4017BE

✅ Sustitución directa
Texas Instruments
📦 16-CDIP
Counter, Decade (divide-by-10) with 10 decoded outputs · CMOS 4000B series · 1 · 10 · Up · Positive edge · 3 V to 18 V · 10 MHz (typ) at VDD = 10 V

Consulte el precio

Ver hoja de datos →

MC14017B

✅ Sustitución directa
📦 16-CDIP
Equivalent 10-output CMOS decade counter with matching clock, reset, carry, and supply assignments; manufacturer-specific speed and temperature limits may differ by up to 30%

📋 Alternativa de referencia (no en el catálogo)

MC14017BD

✅ Sustitución directa
onsemi
📦 16-CDIP
5-stage Johnson decade counter with built-in code converter · 3 V to 18 V · 10 outputs · 5-stage Johnson counter · Positive-going clock edge · DC clock input · Fully static · Spike-free decoded outputs

Consulte el precio

Ver hoja de datos →

CD4017BCN

✅ Sustitución directa
📦 16-CDIP
Equivalent 10-output CMOS decade counter in a 16-lead through-hole package; manufacturer-specific timing and temperature limits may differ by up to 30%

📋 Alternativa de referencia (no en el catálogo)

HEF4017BT

✅ Sustitución directa
📦 16-CDIP
Equivalent decade counter with ten decoded outputs and matching 16-lead logic pins; operating-speed grade may differ by up to 20%

📋 Alternativa de referencia (no en el catálogo)

CD4017BD/3 Valores máximos y características eléctricas

Counter Type Decade counter with 10 decoded outputs
Number of Output Elements 10 outputs
Output Count Width 10 bits
Clock Edge Triggering Positive or negative
Logic Family CD4000 CMOS
Supply Voltage Range 3 V to 18 V
Reset Function Asynchronous reset
Carry Function Carry output for cascaded decade stages
Package Type 16-lead ceramic dual-in-line package (16-CDIP)
Lead Count 16 leads
Tipo de montaje Through-hole
Logic Output Type CMOS decoded outputs

Configuración de pines de CD4017BD/3

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pin 1 CLK — Positive-edge clock input
Pin 2 CLK INH — Clock inhibit input
Pin 3 RESET — Asynchronous reset input
Pin 4 Q0 — Decade output 0
Pin 5 Q1 — Decade output 1
Pin 6 Q2 — Decade output 2
Pin 7 Q3 — Decade output 3
Pin 8 VSS — Ground reference
Pin 9 Q4 — Decade output 4
Pin 10 Q5 — Decade output 5
Pin 11 Q6 — Decade output 6
Pin 12 Q7 — Decade output 7
Pin 13 Q8 — Decade output 8
Pin 14 Q9 — Decade output 9
Pin 15 CARRY — Carry output for cascading
Pin 16 VDD — Positive supply input

Aplicaciones típicas

CD4017BD/3 es adecuado para 6 aplicacións: Stepper Motor Winding Sequencer, Relay and Solenoid Sequencer, Decade Frequency Divider, Lighting and Display Sequencer, Industrial Control Sequence, Digital Timer and Clock Module.

🏭

Stepper Motor Winding Sequencer

The CD4017BD/3 is useful in stepper-motor controllers that energize one winding or phase group at a time. Its ten decoded outputs select successive states after each accepted clock edge, avoiding a separate binary counter and decoder. This simplifies the control path in instruments, printers, and automation mechanisms. The important trade-off is timing: motor current transients and inductive coupling can disturb the CMOS inputs, so clock and reset traces should remain compact, and the motor driver should be referenced correctly to the logic ground. The motor's required step rate must remain within the counter's timing limits and the 16-CDIP package must fit the through-hole design rules.

⚡

Relay and Solenoid Sequencer

CD4017BD/3 can sequence relays, solenoids, or indicator lamps through ten positions because only one decoded output is active during each count state. Its carry output allows additional counter stages when a sequence longer than ten steps is required. For reliable industrial control, use driver transistors or relay interfaces rather than loading CMOS outputs directly with inductive coils. The counter's 3 V to 18 V operating range supports multiple logic-supply choices, but the exact grade must satisfy the ambient-temperature requirement. Reset should return all stages coherently, and supply bypassing should be placed close to the package power pins to limit switching transients.

🔧

Decade Frequency Divider

The CD4017BD/3 divides an incoming clock into ten sequential states, making it appropriate for low-frequency timing and decade-rate indication. A stable oscillator can drive the clock input while the carry output provides a divided pulse for another timing stage. This arrangement is useful in laboratory timers, industrial counters, and educational clock systems. The carry transition occurs after the active count sequence completes, so cascaded stages incur accumulated propagation delay. The source clock must satisfy the datasheet's input transition-time limits, and any output feeding a sensitive timing circuit should be buffered if rise-time degradation could affect the next stage.

💡

Lighting and Display Sequencer

CD4017BD/3 can sequentially select ten display or lighting positions from a clock pulse, creating chase patterns, step indicators, and rotating visual sequences with fewer external logic parts. Because the outputs are decoded, only one state is active at a time, which simplifies multiplexing in indicator panels. Current-limiting resistors and suitable transistor drivers should be used for LEDs rather than overloading the CMOS output stage. The counter's clock and reset controls permit synchronized starting and pausing of the visual sequence. Designers should account for off-state LED behavior, supply noise during switching, and the maximum transition rate of the selected clock source.

🏭

Industrial Control Sequence

CD4017BD/3 supports fixed-step industrial control sequences where each clock event advances a machine through a predefined operating state. Typical stages include idle, actuator on, dwell, actuator off, and fault indication. The ten decoded outputs provide direct state selection, while clock inhibit can pause progression and reset can return the machine to a known condition. For dependable operation, the reset path should have a defined state during power-up, and wiring near motors or contactors should be separated from sensitive clock traces. The 16-CDIP package is well suited to prototypes and legacy through-hole control boards, but production temperature and timing requirements must match the selected qualification level.

⏱️

Digital Timer and Clock Module

CD4017BD/3 can generate decade timing states for digital clocks, interval counters, laboratory timers, and delayed-event systems. Cascading two stages creates one hundred timing positions, while the decoded outputs can trigger display or control functions at selected intervals. The main design constraint is timing accuracy: oscillator accuracy, clock transition time, counter propagation delay, and carry delay all contribute to the displayed interval. Decoded outputs may glitch briefly during transitions, so edge-sensitive downstream circuits should not trigger directly from every output transition. A buffered clock and defined reset strategy improve repeatability in precision timing applications.

Where can I download the CD4017BD/3 datasheet PDF?
The CD4017BD/3 datasheet is available from the Texas Instruments CD4017B document at https://www.ti.com/lit/ds/symlink/cd4017b.pdf. The document covers the CD4017B decade counter and related CD4022B family, including package options, logic behavior, electrical characteristics, timing, and application information. Use the CD4017B pin-description table when assigning PCB signals, and confirm the operating limits for the exact Harris Corporation CD4017BD/3 qualification suffix before releasing a production design.
What is the operating voltage of CD4017BD/3?
The CD4017BD/3 operates from a 3 V to 18 V supply within the CD4017B family's specified operating range. According to the Texas Instruments CD4017B datasheet, the device is a CMOS decade counter designed for low-voltage digital operation. Confirm that the system supply remains inside the manufacturer's recommended operating range under temperature, clocking, and output-loading conditions, and place the required bypass capacitor close to VDD and VSS.
What does the CD4017BD/3 do?
The CD4017BD/3 is a 10-stage CMOS decade counter that activates one of ten decoded outputs for each clock count. According to the Texas Instruments CD4017B datasheet, the counter accepts positive-edge or negative-edge clock pulses, supports asynchronous reset, and provides a carry output when a decade is completed. This makes it suitable for rotary stepper selection, relay sequencing, timing-wheel control, and cascaded decimal counting.
What is the CD4017BD/3 pinout?
The 16-CDIP CD4017BD/3 uses pins 1 and 2 for CLK and clock inhibit, pin 3 for reset, pins 4 through 7 and 9 through 13 for Q0 through Q9, pin 8 for VSS, pin 15 for carry, and pin 16 for VDD. According to the Texas Instruments CD4017B datasheet pin-description table, these assignments support direct 16-lead through-hole assembly. Follow the datasheet for input priority and reset timing rather than inferring behavior from the decoded outputs.
How do I use the clock inhibit and reset inputs on CD4017BD/3?
The clock inhibit input on pin 2 prevents the CD4017BD/3 from advancing when it is asserted, while the reset input on pin 3 returns the counter to its initial decoded state. According to the Texas Instruments CD4017B datasheet, reset is asynchronous and acts independently of the clock transition. For reliable operation, do not allow the inhibit and reset controls to switch with excessive ringing, and ensure inactive outputs remain at defined logic levels.
Can CD4017BD/3 be used for a 100-step sequence?
Yes, two CD4017BD/3 stages can be cascaded to produce a 100-step sequence by using the first-stage carry output as the second-stage clock and combining their decoded outputs in the required order. According to the Texas Instruments CD4017B datasheet, the carry output advances a following decade stage. Allow for cumulative propagation delay, check reset timing across both stages, and ensure the output decoding logic represents the intended mechanical or electrical sequence.
What are the best CD4017BD/3 applications?
The CD4017BD/3 is best suited to applications needing ten sequential outputs rather than a binary count bus. Typical uses include stepper-motor winding selection, relay sequencing, decade frequency division, lighting patterns, timer wheels, and industrial control sequences. According to the Texas Instruments CD4017B datasheet, its ten decoded outputs and carry terminal directly support these state-sequencing tasks. Choose the operating speed and supply limits from the datasheet for the intended clock rate.
CD4017BD/3 vs CD4017BE — which package should I choose?
Choose the CD4017BD/3 when the required assembly format is the 16-lead ceramic dual-in-line package identified for this part. The CD4017BE belongs to the same CD4017B function family but uses the family's E-suffix package code, so its mechanical fit must be checked against the original PCB rather than inferred from the logic function. According to the Texas Instruments CD4017B datasheet, package suffix codes select ceramic DIP, plastic DIP, SO, and TSSOP options.
When should I choose CD4017BD/3 over a binary counter?
Choose CD4017BD/3 when the circuit needs ten decoded, mutually exclusive outputs and does not require direct access to a four-bit binary count. Its integrated decade counter and decoder reduce external logic compared with a binary counter plus decoder arrangement. According to the Texas Instruments CD4017B datasheet, the carry output also simplifies expansion. Use a binary counter instead when parallel binary data, programmable count values, or bidirectional counting are required.
Is CD4017BD/3 suitable for an industrial sequencer?
CD4017BD/3 is suitable for a low-speed industrial sequencer when the 16-CDIP package, supply voltage, temperature grade, and clock rate meet the application's requirements. Its decoded outputs can select relays or discrete stages, while reset and clock inhibit support controlled starting and pausing. According to the Texas Instruments CD4017B datasheet, the device is intended for CMOS counter and divider operation; validate environmental conditions and output loads before using it in safety-critical control.
What can replace CD4017BD/3 without redesigning the PCB?
The closest replacements are 16-lead CD4017B devices with the same clock, reset, decoded-output, carry, VDD, and VSS pin assignments. Candidates listed on this page include CD4017BD/3, CD4017BD, CD4017BE, MC14017B, and HEF4017B variants, but each ordering code must be checked for the exact 16-lead mechanical package and electrical limits. The Texas Instruments CD4017B datasheet pin table is the controlling reference for PCB-level compatibility.
Is a Fairchild CD4017BCN a drop-in replacement for CD4017BD/3?
A CD4017BCN can be a drop-in candidate only when its 16-lead through-hole footprint, pin assignments, supply range, timing, and output ratings match the CD4017BD/3 design. The CD4017BCN is identified as a 16-pin CMOS decade counter, while the CD4017BD/3 is listed as a 16-CDIP counter. According to the CD4017B datasheet and the CMOS cross-reference information, the function is equivalent, but production use requires checking the selected manufacturer and suffix ratings.
Where can I buy CD4017BD/3 online?
Use the Request a Quote form on this page to request CD4017BD/3 availability, current unit pricing, minimum order quantity, and lead time for the 16-CDIP configuration. The part is identified in current product listings as a Harris Corporation counter IC in a 16-CDIP package, but availability and shipment timing can change. Provide the required quantity, date code, manufacturer preference, and target packaging so the sourcing request can be evaluated accurately.
What is the price of CD4017BD/3?
Use the Request a Quote form on this page for the current CD4017BD/3 price and quantity schedule. The visible product record is for the Harris Corporation 16-CDIP part, and commercial terms may depend on quantity, date code, packaging, and market conditions. The structured listing record is provided for comparison, but the quotation form should be used to obtain an actionable price for the required order.
What is the lead time for CD4017BD/3?
The current lead time for CD4017BD/3 should be requested through the Request a Quote form on this page. Lead time can vary with manufacturer allocation, stock, date-code requirements, and order quantity, so a single fixed interval would not represent a reliable commitment. State the required quantity, acceptable date code, delivery location, and whether the full 16-CDIP configuration is mandatory when submitting the request.
Is CD4017BD/3 currently in stock?
CD4017BD/3 is currently shown as in stock in the referenced component listing, but live inventory can change rapidly. Use the Request a Quote form on this page to confirm current stock for the exact Harris Corporation ordering code and 16-CDIP configuration. Provide your required quantity and any date-code constraints. The quote confirmation should be treated as the operative stock commitment for the order.
What are the key CD4017BD/3 specifications engineers should know?
The key CD4017BD/3 specifications are its 10 decoded outputs, 10-bit decade-counter function, positive or negative clock-edge triggering, asynchronous reset, carry output, and 16-CDIP package. According to the Texas Instruments CD4017B datasheet, the device operates in the CD4000 CMOS family from 3 V to 18 V. Its through-hole package and cascading carry make it useful for laboratory instruments, industrial sequencers, relay controls, and timing applications.

Datos de referencia de ingeniería para CD4017BD/3 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose CD4017BD/3 when the design specifically needs a Harris Corporation-qualified 10-output CMOS decade counter in a 16-lead ceramic DIP package. It is well suited to legacy through-hole boards, laboratory instruments, relay sequencing, and fixed-state industrial controls. Choose CD4017BE when the same CD4017B function and 16-pin logic arrangement are required but a different suffix or package construction is appropriate. MC14017B and CD4017BCN can be considered for equivalent decade-counter operation, but verify their exact electrical ratings, temperature grades, and DIP variants. HEF4017BT is another CMOS decade-counter option for a 16-lead design, although speed, supply, and manufacturer-specific characteristics may differ. For every candidate, confirm that pin 1 orientation, pitch, row spacing, pin names, clock-edge behavior, reset priority, and output loading match the original PCB. Avoid selecting related counters such as CD4022, CD4026, or binary counters solely by function; their count ranges and decoded-output behavior are not interchangeable with CD4017BD/3.

Comparación con alternativas

Parámetro Este producto CD4017BD CD4017BE MC14017B CD4017BCN
Brand Harris Corporation Texas Instruments Texas Instruments onsemi onsemi
Package 16-CDIP 16-CDIP 16-CDIP 16-CDIP 16-CDIP
Counter Type Decade counter Decade counter Decade counter Decade counter Decade counter
Decoded Outputs 10 outputs 10 outputs 10 outputs 10 outputs 10 outputs
Output Count Width 10 bits 10 bits 10 bits 10 bits 10 bits
Clock Edge Triggering Positive or negative Positive or negative Positive or negative Positive or negative Positive or negative
Reset Function Asynchronous reset Asynchronous reset Asynchronous reset Asynchronous reset Asynchronous reset
Cascade Output Carry output Carry output Carry output Carry output Carry output
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole

Diferenciadores clave

  • Provides ten decoded outputs without separate binary-to-decimal decoding (frente a MC14017B)
  • Supports both positive and negative clock-edge triggering (frente a CD4017BCN)
  • Simplifies multi-decade expansion (frente a CD4017BD)

Notas de diseño

Keep the clock waveform within the CD4017B family's specified rise-time and fall-time limits. A noisy or slowly rising clock edge can cause multiple transitions within one logical event and produce an incorrect decoded state. Use a clean oscillator output, avoid long clock traces, and place a suitable bypass capacitor close to VDD. The clock inhibit and reset inputs should also have defined levels during startup; floating control inputs can create unintended count advancement.

Place the manufacturer-recommended supply bypass capacitor between the VDD and VSS pins, with the shortest practical connection to the counter. When driving relays, solenoids, LEDs, or other switched loads, use separate driver paths and isolate their transients from the CMOS clock and reset nets. Although the CD4017B operates from 3 V to 18 V, the output current and transition-time limits vary with supply voltage, so the actual load and operating voltage must be checked together.

Route CLK, CLK INH, and RESET away from output and power-driver traces to reduce capacitive coupling and false triggering. Keep the carry trace short when cascading counters because accumulated clock-to-carry propagation delay affects the accuracy of longer sequences. For a 16-CDIP design, use a socket during prototype development and inspect for solder bridges around the closely spaced leads. The PCB footprint should follow the manufacturer's 16-CDIP mechanical drawing rather than a generic DIP drawing.

Do not assume that every CD4017B suffix is mechanically, electrically, or qualification-equivalent to CD4017BD/3. Confirm the 16-CDIP package code, operating-temperature range, supply limits, clock timing, and manufacturer identity against the selected replacement. The functional pin assignments are similar across the CD4017B family, but package suffix codes can distinguish ceramic, plastic, small-outline, and thin-shrink options. Verify the exact ordering code before treating a candidate as a production drop-in.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance declarations for the exact CD4017BD/3 qualification suffix were not identified. The AEC-Q100 field is not applicable because this product is a general-purpose CMOS logic IC rather than an automotive-qualified device.

Búsquedas relacionadas

cd4017bd datasheet CD4017BD/3 datasheet CD4017BD/3 pinout CD4017BD/3 datasheet pdf CD4017BD/3 equivalent CD4017BD/3 replacement CD4017BD/3 cross reference CD4017BD/3 16-CDIP CD4017BD/3 decade counter CD4017BD/3 stepper motor sequencer CD4017BD/3 vs CD4017BE CD4017BD/3 price CD4017BD/3 stock Harris CD4017BD/3

Componentes & términos relacionados

Harris Corporation CD4017BD/3 CD4017B Texas Instruments CD4017BD CD4017BE MC14017B MC14017BD CD4017BCN HEF4017BT decade counter counter IC CMOS logic CD4000 series logic IC digital semiconductor 16-CDIP dual-in-line package through-hole mounting QFN family surface mount positive-edge triggering negative-edge triggering asynchronous reset carry output clock inhibit decoded outputs stepper motor sequencer relay sequencing frequency divider industrial control logic level supply voltage propagation delay
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ